Detection of congenital müllerian duct anomalies using three-dimensional ultrasound

PURPOSE: The purpose of this study was to assess the value of 3-dimensional sonography in the diagnosis of congenital müllerian duct anomalies, which cause infertility, preterm labor, and first trimester abortion. METHODS: A prospective study was undertaken in which 40 patients with histories of repeated spontaneous abortions or infertility were first examined using conventional 2-dimensional sonography or hysterosalpingography. Three-dimensional transvaginal sonography was then performed. RESULTS: Twenty-eight women had müllerian duct abnormalities, and 12 women had normal uterine anatomy. Müllerian duct defects detected in this study were unicornuate uterus (3), bicornuate uterus (3), complete or partial septate uterus (12), arcuate uterus (9), and didelphic uterus (1). The diagnosis of müllerian duct anomalies in these patients was confirmed by laparoscopic and/or hysteroscopic examinations. Three-dimensional sonography demonstrated all congenital uterine abnormalities with a sensitivity and specificity of 100%. Separate uterus and bicornuate uterus could be correctly diagnosed using 3-dimensional sonography in 11 (92%) of 12 cases and 3 (100%) of 3 cases, respectively. These 2 abnormalities were commonly confused with each other using hysterosalpingography and conventional sonography. CONCLUSIONS: Three-dimensional sonography with image reconstruction is less expensive and less invasive than hysterosalpingography for the assessment of uterine anatomy and diagnosis of müllerian duct abnormalities. The ability to visualize both the uterine cavity and the myometrium on a 3-dimensional scan facilitates the diagnosis of uterine anomalies and enables the differentiation of septate from bicornuate uteri for preoperative surgical planning.     

基于非线性规划的指数自回归模型的辨识

讨论了指数自回归模型的辨识问题，证明了该模型最小二乘估计的目标函数的非凸性，并给出了使该函数为凸的条件，最后给出了辨识该模型的算法及该算法的收敛性，并以数值例子加以说明。     

广义杠杆规则及其在配方计算中的应用

作者将相图中的一维杠杆规则推广至多元配料系统而成为广义杠杆规则，并利用这一规则对配方计算中解的可行域问题进行了深入的讨论，给出了几何解释及工艺诠释，对配方设计有一定的指导作用。     

NH_4Cl水溶液在成膜过程中的致孔作用

本文以ＮＨ４Ｃｌ饱和水溶液做添加剂，对ＰＶＤＦ／ＮＭＰ体系在成膜过程中的致孔作用做了研究。铸膜液中随ＮＨ４Ｃｌ水溶液加入量的改变，膜孔径也发生变化，并出现最大值。通过Ｘ－射线衍射扫描发现制膜液中存在无机盐时膜中无定形态结构增加，表明无机盐的加入有助于膜孔形成     

矿化剂对氧化铬绿色釉呈色性能的影响

针对氧化铬绿色釉存在色调暗不够鲜艳的缺点，研究了矿化剂对其呈色性能的影响，经分光光度分析的扫描电镜测试，表明矿化剂具有一定的助熔作用和还原性，从而提高了氧化铬绿色釉的鲜艳度和着色力，增强了装饰性，同时矿化剂还能降低烧成温度，节约能源，具有应用价值。     

广播发射集散控制系统

本文介绍了广播发射台利用计算机技术、网络技术、遥控遥测技术、现代测试手段，对设备进行自动化控制与管理；实现设备技术指标自动测试，发射台无人值班、有人留守，建立机器的计算机档案制度，确保安全优质播出的方法和经验。     

微波单片集成电路的成品率优化

采用建立管芯等效电路模型、灵敏度分析以及统计勘探法对微波单片集成电路进行成品率优化，并编制了软件，加入到ＧａＡｓＩＣＣＡＤ系统中。应用该软件对Ｘ波段低噪声ＭＭＩＣ、超宽带ＭＭＩＣ放大器进行了设计，成品率有较大的提高，电路性能有所改善。     

中国的三种非同步轨道卫星移动通信系统星座方案

本文介绍基于我国的三种非同步轨道卫星移动通信系统星座方案：低、中轨系统各有２４和１８颗星，轨道高度分别为１３２６和８０３５ｋｍ，两系统各以５°和３０°的仰角对我国的覆盖率为９９．７８％和９９．９６％；椭圆轨道系统１２颗星，近、远地点分别为４２７和２９０６ｋｍ，以７°和１５°仰角对我国北纬２０°以上地区覆盖率分别为９７．９０％和８９．６１％，若增加４颗中轨卫星，以１５°仰角对我国的覆盖率为９９．９９％。