Improved shape evolution of copper interconnects prepared by jet-stream etching

In the preparation of copper interconnects in the conductor pattern of a printed circuit board (PCB), wet etching processes are commonly adopted for creating patterns of high-density interconnects. Currently available techniques of immersion and spray etching could lead to poorly shaped wires due to complex flow fields or the disturbing puddling effect. A modified technique of arrayed jet-stream etching was developed in this work, aiming at producing well-defined copper interconnects on a PCB in a significantly shorter time. The results were appealing in that copper interconnects of 35/140 μm (thickness/width) exhibiting etching factors of greater than 6 were obtained in 20 s, much better than the conventional ones with etching factors of 3 to 5 and etching times of at least 2 min. In addition, uniformly etched copper interconnects with less than 20 μm undercuts were observed on one etching line. One additional point to note is that no banking agents or inhibitors as commonly seen in conventional etching techniques were needed in this new processing method.     

Effect of annealing on poly(urethane‐siloxane) copolymers

The N‐substituted polyaniline (PANi) was synthesized by incorporation of bromine‐terminated polystyrene (PS‐Br) onto the emeraldine form of polyaniline. End brominated polystyrene was synthesized by atom transfer radical polymerization (ATRP) technique and then deprotonated polyaniline was reacted with PS‐Br to prepare PS‐grafted PANi (PS‐g‐PANi) copolymer through N‐grafting reaction. The degree of N‐grafting can be controlled by adjusting the molar feed ratio of PS‐Br to the number of repeat units of PANi. The microstructure and compositions of the PS‐g‐PANi copolymers with different degrees of N‐substitution were characterized by FT‐IR, elemental analysis, differential scanning calorimetry (DSC), and scanning electron microscopy (SEM). The cyclicvoltammetry shows that the electroactivity of N‐substituted PANi is strongly dependent on the degree of N‐grafting. The solubility of PS‐g‐PANi copolymers in common organic solvents such as tetrahydrofuran and chloroform was improved by increasing the degree of N‐grafting, and also the samples are partially soluble in xylene. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Compatible and crystallization properties of poly(lactic acid)/poly(butylene adipate‐co‐terephthalate) blends

Differential scanning calorimetry (DSC), wide angle X‐ray diffraction (WAXD) and dynamic mechanical analysis (DMA) properties of poly(lactic acid)/ poly(butylene adipate‐co‐terephthalate) (PLA/PBAT) specimens suggest that only small amounts of poor PLA and/or PBAT crystals are present in their corresponding melt crystallized specimens. In fact, the percentage crystallinity, peak melting temperature and onset re‐crystallization temperature values of PLA/PBAT specimens reduce gradually as their PBAT contents increase. However, the glass transition temperatures of PLA molecules found by DSC and DMA analysis reduce to the minimum value as the PBAT contents of PLA_xPBAT_y specimens reach 2.5 wt %. Further morphological and DMA analysis of PLA/PBAT specimens reveal that PBAT molecules are miscible with PLA molecules at PBAT contents equal to or less than 2.5 wt %, since no distinguished phase‐separated PBAT droplets and tan δ transitions were found on fracture surfaces and tan δ curves of PLA/PBAT specimens, respectively. In contrast to PLA, the PBAT specimen exhibits highly deformable properties. After blending proper amounts of PBAT in PLA, the inherent brittle deformation behavior of PLA was successfully improved. Possible reasons accounting for these interesting crystallization, compatible and tensile properties of PLA/PBAT specimens are proposed. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Membrane electrode assemblies doped with H3PO4 for high temperature proton exchange membrane fuel cells

H₃PO₄ content plays a critical role in high temperature proton exchange membrane fuel cells (HT-PEMFC), as it is responsible for the majority of the conductivity of the key components under high temperature operation. The conductivities of commercial AB-PBI membranes doped by immersing in 85 wt.% H₃PO₄ for different times and temperatures are investigated. The effect of H₃PO₄ loading in electrodes, including the AB-PBI polymer and a Pt/C catalyst, is also studied. The as-prepared electrodes and membranes are combined to fabricate a membrane electrode assembly for HT-PEMFCs. The results reveal that AB-PBI membranes doped with 85 wt.% H₃PO₄ at 90 °C for 9 h display a maximum conductivity of 33 mS cm⁻¹. This membrane was selected and combined with electrodes including 15 wt.% AB-PBI and 0.75 mg cm⁻² Pt with different H₃PO₄ loadings. A maximum current density of 260 mA cm⁻² was achieved in the as-prepared MEA (with 5 mg cm⁻² H₃PO₄ in electrodes) operating at 0.6 V and 160 °C, using oxygen and hydrogen.     

Robust fault detection of turbofan engines subject to adaptive controllers via a Total Measurable Fault Information Residual (ToMFIR) technique

This paper provides a new design of robust fault detection for turbofan engines with adaptive controllers. The critical issue is that the adaptive controllers can depress the faulty effects such that the actual system outputs remain the pre-specified values, making it difficult to detect faults/failures. To solve this problem, a Total Measurable Fault Information Residual (ToMFIR) technique with the aid of system transformation is adopted to detect faults in turbofan engines with adaptive controllers. This design is a ToMFIR-redundancy-based robust fault detection. The ToMFIR is first introduced and existing results are also summarized. The Detailed design process of the ToMFIRs is presented and a turbofan engine model is simulated to verify the effectiveness of the proposed ToMFIR-based fault-detection strategy.     

An integrated remote sensing and GIS approach in the monitoring and evaluation of rapid urban growth for sustainable development in the Pearl River Delta,China

The publication of the Brundtland Report in 1987 has led to worldwide concern over sustainable development. Sustainable development is particularly important to regions that are undergoing rapid economic development, such as the Pearl River Delta and other rapidly developing regions in China, Malaysia, Thailand and Asia. Geographical information systems (GIS) and remote sensing are useful tools in the formulation, implementation and monitoring of urban development in the move towards a sustainable development strategy. Since the adoption of economic reform in China in 1978, cities in the Pearl River Delta are developing very rapidly. Economic growth is around 20% a year, making it one of the highest growth areas in the world. Accompanying economic development is rapid urban growth. This paper attempts to demonstrate the application of the integration of GIS and remote sensing in urban growth management in the Pearl River Delta by using them to monitor and evaluate land development. Remote sensing techniques are used to carry out land‐use change detection by using multi‐temporal remote sensing data. Land‐use change impact analysis is further carried out by the integration of GIS and remote sensing.     

Characterization of Starch from Maize Endosperm Mutants

Some maize endosperm mutants have branched-chain starch components with long exterior chains which make the blue-value procedure for estimating amylose content questionable. Gel filtration was used to estimate starch composition of normal, high-amylose, waxy and other maize endosperm mutants. Loosely-branched polymers appeared responsible for the apparent amylose content. In some mutants high and intermediate loosely branched polysaccharides were found in addition to amylose. The sweet corn background of some endosperm genotypes influenced the types of polymers produced compared to the dent backgrounds used by previous researchers.     

Pathogenesis and Treatment of Myeloma-Related Bone Disease

Multiple myeloma is a hematologic malignancy of plasma cells that causes bone-destructive lesions and associated skeletal-related events (SREs). The pathogenesis of myeloma-related bone disease (MBD) is the imbalance of the bone-remodeling process, which results from osteoclast activation, osteoblast suppression, and the immunosuppressed bone marrow microenvironment. Many important signaling cascades, including the RANKL/RANK/OPG axis, Notch signaling, the Wnt/β-Catenin signaling pathways, and signaling molecules, such as DKK-1, sclerostin, osteopontin, activin A, chemokines, and interleukins are involved and play critical roles in MBD. Currently, bisphosphonate and denosumab are the gold standard for MBD prevention and treatment. As the molecular mechanisms of MBD become increasingly well understood, novel agents are being thoroughly explored in both preclinical and clinical settings. Herein, we will provide an updated overview of the pathogenesis of MBD, summarize the clinical management and guidelines, and discuss novel bone-modifying therapies for further management of MBD.     

Numerical Investigation of Reburning Flow in a Carbon Monoxide Boiler

This study investigates the combustion and fluid flow in a carbon monoxide boiler from the Formosa Petrochemical Corporation in Taiwan, with emphasis on the effect of reburning on NOx reduction. It is found that NOx reduction occurs mainly behind the DeNOx section where recirculation is strong. A smaller reburn hole yields better NOx reduction while a larger reburn hole yields worse NOx reduction and a localized high temperature region near the reburn hole. NOx reduction is better for a lower primary/reburn fuel ratio and a higher inlet/reburn air ratio. A single-reburn-hole arrangement yields lower NOx concentration and temperature than does a three-reburn-hole arrangement.     

Detection of fresh palm oil adulteration with recycled cooking oil using fatty acid composition and FTIR spectral analysis

There is a growing concern over the food safety issue related to increased incidence of cooking oil adulteration with recycled cooking oil (RCO). The objective of this study was to detect fresh palm olein (FPO) adulteration with RCO using fatty acid composition (FAC) and Fourier-transform infrared spectroscopy (FTIR) spectral analyses combined with chemometrics. RCO prepared in the laboratory was mixed with FPO in the proportion ranged from 1% to 50% (v/v) to obtain the adulterated oil samples (AO). FACs for FPO, RCO, and AO were determined using gas chromatography equipped with a flame ionization detector (GC-FID). The compositions of most fatty acids in RCO lied within the normal ranges of Codex standard, except for C8:0, C10:0, C11:0, C15:0, trans C18:1, and polyunsaturated fatty acids (PUFAs), C20:5. PUFAs showed a consistent decreasing trend with increasing magnitude of change with respect to increasing adulteration level and thus might be a good indicator for detecting FPO adulteration with RCO. The evaluation parameters (coefficient of determination, root mean standard error) of the FTIR-partial least square (PLS) model of palm oil adulteration with recycled oil are R² = 0.995 and 3.25, respectively. For FTIR spectral analysis, the distinct variations in spectral regions and aberrations in characteristic bands between FPO and RCO were observed. The optimized PLS calibration model developed from normal spectral of the combined region at 3602–3398, 3016–2642, and 1845–650 cm^?1 overpredict the adulteration level. On the other hand, the discriminant analysis classification model was able to classify the FPO and AO into two distinct groups. Improvement of the principles of combined techniques in authenticating AO from fresh oil is beneficial as a guideline to detect adulteration in cooking oil.