Amifostine protects normal tissues from paclitaxel toxicity while cytotoxicity against tumour cells is maintained

The objectives of this study were to evaluate the protective effects of amifostine against paclitaxel-induced toxicity to normal and malignant human tissues. Haematopoietic progenitor colony assays were used to establish the number of CFU-GEMM and BFU-E colonies after incubation with WR-1065 alone, Amifostine alone, paclitaxel (2.5 or 5 microM) +/- WR-1065 or amifostine. MTT and alkaline elution assays evaluated the in vitro growth inhibitory and DNA damaging effects, respectively, of paclitaxel with or without amifostine against normal human fibroblasts and human non-small cell lung cancer (NSCLC) cells. This combination was also evaluated in vivo using severe combined immune deficient (scid) mouse models of early (non-palpable tumours) and advanced (palpable tumours) human ovarian cancer. Human 2780 ovarian cancer cells were inoculated subcutaneously while paclitaxel and amifostine were administered intraperitoneally. A brief exposure (15 min) to amifostine not only protected human haematopoietic progenitor colonies from paclitaxel toxicity, but stimulated the growth of CFU-GEMM and BFU-E beyond control values. Amifostine protected normal human lung fibroblasts from paclitaxel-induced cytotoxicity and DNA single-strand breaks. However, paclitaxel cytotoxicity and DNA single-strand breaks were actually enhanced by pretreatment with amifostine in the NSCLC model. Importantly, amifostine did not interfere with paclitaxel antitumour activity even with prolonged exposure (24.5 h) of the lung cancer cells to high concentrations (1.2 mM) in vitro or following five repetitive high doses (200 mg/kg) given to scid mice with human ovarian cancer xenografts. Indeed, under certain circumstances, amifostine resulted in sensitisation of tumour cells to paclitaxel. Our results confirm previous reports of the ability of amifostine to protect normal tissues from the toxic effects of chemotherapy drugs and now extend these observations to paclitaxel.     

Ca2+ differentially regulates conventional protein kinase Cs' membrane interaction and activation

The regulation of conventional protein kinase Cs by Ca2+ was examined by determining how this cation affects the enzyme's 1) membrane binding and catalytic function and 2) conformation. In the first part, we show that significantly lower concentrations of Ca2+ are required to effect half-maximal membrane binding than to half-maximally activate the enzyme. The disparity between binding and activation kinetics is most striking for protein kinase C betaII, where the concentration of Ca2+ promoting half-maximal membrane binding is approximately 40-fold higher than the apparent Km for Ca2+ for activation. In addition, the Ca2+ requirement for activation of protein kinase C betaII is an order of magnitude greater than that for the alternatively spliced protein kinase C betaI; these isozymes differ only in 50 amino acids at the carboxyl terminus, revealing that residues in the carboxyl terminus influence the enzyme's Ca2+ regulation. In the second part, we use proteases as conformational probes to show that Ca2+dependent membrane binding and Ca2+-dependent activation involve two distinct sets of structural changes in protein kinase C betaII. Three separate domains spanning the entire protein participate in these conformational changes, suggesting significant interdomain interactions. A highly localized hinge motion between the regulatory and catalytic halves of the protein accompanies membrane binding; release of the carboxyl terminus accompanies the low affinity membrane binding mediated by concentrations of Ca2+ too low to promote catalysis; and exposure of the amino-terminal pseudosubstrate and masking of the carboxyl terminus accompany catalysis. In summary, these data reveal that structural determinants unique to each isozyme of protein kinase C dictate the enzyme's Ca2+-dependent affinity for acidic membranes and show that, surprisingly, some of these determinants are in the carboxyl terminus of the enzyme, distal from the Ca2+-binding site in the amino-terminal regulatory domain.     

Effect of a new fermented soy milk product on serum lipid levels in normocholesterolemic adult men

This study was undertaken to verify the effect of a daily intake of a new fermented soy milk produced with Enterococcus faecium and Lactobacillus jugurti on the serum lipid levels in normocholesterolemic middle-aged men. The study was randomized, double-blind and placebo-controlled and was performed for a period of 6 weeks. Forty-four normocholesterolemic healthy, male volunteers, aged 40-55 years old were randomly separated in two groups: The F-group received 200 ml of the fermented product daily and the P-group received 200 ml of placebo (chemically fermented). The blood samples were drawn initially and after 3 and 6 weeks and serum values for total cholesterol, HDL-cholesterol and triglyceride were determined. The LDL-cholesterol value was estimated. No significant changes in the fermented group (F) were observed for total cholesterol, LDL-cholesterol or triglyceride levels, while the HDL-cholesterol level was significantly higher (p < or = 0.05) after 6 weeks. The total cholesterol and LDL-cholesterol levels were significantly higher (p < or = 0.05) in the placebo group (P), but no changes were found for the HDL-cholesterol and triglyceride levels during the experimental period. In conclusion, the intake of 200 ml/day of the fermented soy milk, produced with E. faecium and L. jugurti, for 6 weeks, did not affect the serum total cholesterol and LDL-cholesterol, and led an increase of 10% in the HDL-cholesterol level.     

Slot coating flows of non‐colloidal particle suspensions

Slot coating is used in the manufacturing of functional films, which rely on specific particle microstructure to achieve the desired performance. Final structure on the coated film is strongly dependent on the suspension flow during the deposition of the coating liquid and on the subsequent drying process. Fundamental understanding on how particles are distributed in the coated layer enables optimization of the process and quality of the produced films. The complex coating flow leads to shear‐induced particle migration and non‐uniform particle distribution. We study slot coating flow of non‐colloidal suspensions by solving the mass and momentum conservation equations coupled with a particle transport equation using the Galerkin/Finite element method. The results show that particle distribution in the coating bead and in the coated layer is non‐uniform and is strongly dependent on the imposed flow rate (wet thickness). © 2016 American Institute of Chemical Engineers AIChE J, 63: 1122–1131, 2017     

Photocurable shape-memory polyether-polythioether/graphene nanocomposites and the study of their thermal conductivity

Herein a method is described to prepare photocurable thermally-conductive shape memory epoxy/ graphene composites. By photopolymerizing the epoxy resin diglycidyl ether of bisphenol A with an allyl-functionalized ditertiary amine as the curing agent, jointly with a multifunctional thiol, a crosslinked polyether-polythioether co-network was obtained. The presence of a soft domain like the flexible polythioethers enable the co-network to display shape memory properties. By varying the polyether to polythioether ratio it was possible to modulate the shape memory characteristics of the composite. The effect of the concentration of graphene nanoplatelets (GNP) in the composite was also investigated. Shape memory performances revealed excellent values of shape recovery and shape fixity with maximums of 98 and 99% respectively. The temporary- shaped composites with higher concentration of polythioethers and GNP regained their permanent shapes in 2–3 s when heated above the programming temperature. The thermal conductivity in the composites reached 0.39 W/m°K for the composite with 15% w/w of GNP. The presence of the polythioethers in the co-network enhanced the toughness of the composite as revealed by the impact resistance analysis.     

Reduced percolation concentration in polypropylene/expanded graphite composites: Effect of viscosity and polypyrrole

With the goal to obtain material combining electrical and thermal conductivity at low filler loadings, composites based on polypropylenes (PP) and expanded graphite (EG) have been prepared. The effects of matrix viscosity and of coating the EG particles with polypyrrole (PPy, EG/PPy = 37.5/62.5 by weight) on the EG dispersibility and formation of percolation structures have been analyzed. When increasing the EG amount from 6 to 8 wt %, the electrical conductivity of PP/EG composites increased by 7–9 orders of magnitude, independent of matrix viscosity. When EG‐PPy is added, percolation was observed between 8 and 12 wt % EG‐PPy (3 and 4.5 wt % EG) in case of PP with higher viscosity and 6 wt % EG (2.25 wt % EG) in case of PP with lower viscosity, exhibiting a strong synergistic effect of EG and PPy in the latter case. In contrast, PPy does not contribute to reduction of thermal percolation concentration. Thermal percolation is observed at 8 wt % EG in PP/EG composites, but no percolation was found in PP/EG‐PPy composites with EG‐PPy contents of up to 20 wt %, corresponding to 7.5 wt % EG. Analyzing the melt rheology it becomes clear that the contribution of PPy to the formation of a filler network is strongly dependent on the matrix viscosity. The comparison of thermal, electrical and rheological percolation reveals that PPy participates in electron transport reducing the electrical percolation but not to heat transport. Overall, we found a good correlation between electrical, thermal, and melt rheological percolation concentrations. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41994.     

The affinity of cholera toxin for Ni2+ ion

Cholera toxin (CT) was shown to bind to immobilized Ni2+ ion. The affinityof CT for the complex required the presence of the Ni2+ ion, since CT wasunable to bind in its absence. Binding was mediated by the B-subunit (CTB)as both CT and CTB bound to the resin, but not the A- subunit (CTA).Binding was reversible in the presence of imidazole and suggested that theaffinity of CT for the Ni2+ ion was mediated by His residues. Theheat-labile enterotoxin of Escherichia coli (LT), which is closely relatedto CT, was unable to bind to the Ni2+ ion. Comparison of amino acidsequences revealed the presence of three His residues in CT (positions 13,57 and 94), but only one in LT (position 57). To confirm that the residuesat positions 13 and 94 of CTB were responsible for the binding, they werechanged to residues found in LTB. Changing His13-->Arg completelyabrogated the ability of CTB to bind to Ni2+ ion. In contrast, the mutationof His 94-->Asn reduced, but did not abrogate, the ability of CTB tobind to Ni2+ ion. Based on calculated interatomic distances, it is unlikelythat His13 and His94 are part of the same complex. There appear to be twoseparate binding sites, with the principal site involving His13 and a muchweaker site involving His94. This latter site can only participate inbinding if the complex involving His13 has formed.     

Effect of a novel soy fermented product enriched with isoflavones and calcium on bone tissue of rats

The objective was to evaluate the effect of soy fermented product intake on the corporal weight and bone tissue of ovariectomized mature rats. This product was fermented with Enterococcus faecium and Lactobacillus jugurti and enriched with isoflavones and calcium. The animals were divided in 5 groups: sham-ovariectomized; ovariectomized; ovariectomized treated with soy fermented product enriched with isoflavones and calcium; ovariectomized treated with soy fermented product enriched with calcium and ovariectomized treated with non-fermented product enriched only with calcium. In order to evaluate the effect of the tested product on bone tissue (femur and tibia), the following parameters were analyzed: length; mechanical assay of three points; density (Archimedes principle); mineral content; calcium content; measure of the trabecular widths. The corporal weight of group treated with soy fermented product containing isoflavones and calcium showed no statistical difference from sham-ovariectomized group and trabecular widths tended to have larger than ovariectomized group. However, there was no significant difference to the other evaluated parameters in result of the diverse treatments. Thus, soy fermented product enriched with isoflavones and calcium inhibited the increasing of corporal weight caused by ovariectomy and revealed a tendency to trabecular protection after castration.     

Clinical management of carpal tunnel syndrome: a 12-year review of outcomes

Carpal tunnel syndrome (CTS) is a disorder frequently encountered by occupational health care specialists. The health care management of this disorder has involved a diverse set of clinical procedures. The present article is a review of the literature related to CTS with an emphasis on occupational-related CTS. MEDLINE, Cumulative Index to Nursing and Allied Health Literature, PsycLIT, and NIOSHTIC databases from 1985-1997 were searched for treatment outcome studies related to CTS. Treatments of interest included surgery, physical therapy, drug therapy, chiropractic treatment, biobehavioral interventions, and occupational rehabilitation. A systematic review of the effects of these interventions on symptoms, medical status, function, return to work, psychological well-being, and patient satisfaction was completed. Compared to other treatments, the majority of studies assessed the effects of surgical interventions. Endoscopic release was associated with higher levels of physical functioning and fewer days to return to work when compared to open release. Limited evidence indicated: 1) steroid injections and oral use of B6 were associated with pain reduction; 2) in comparison to splinting, range of motion exercises appeared to be associated with less pain and fewer days to return to work; 3) cognitive behavior therapy yielded reductions in pain, anxiety, and depression; and, 4) multidisciplinary occupational rehabilitation was associated with a higher percentage of chronic cases returning to work than usual care. Workers' compensation status was associated with increased time to return to work following surgery. Conclusions are preliminary due to the small number of well-controlled studies, variability in duration of symptoms and disability, and the broad range of reported outcome measures. While there are several opinions regarding effective treatment, there is very little scientific support for the range of options currently used in practice. Despite the emerging evidence of the multivariate nature of CTS, the majority of outcome studies have focused on single interventions directed at individual etiological factors or symptoms and functional limitations secondary to CTS.     

Structural evolution in Fe ion implanted Si upon thermal annealing

We have performed high-dose Fe ion implantation into Si and characterized ion-beam-induced microstructures as well as annealing-induced ones using transmission electron microscopy (TEM) and grazing-incidence X-ray diffraction (GIXRD). Single crystals of Si(1 0 0) substrate were irradiated at 623 K with 120 keV Fe⁺ ions to a fluence of 4 × 10¹⁷ cm⁻². The irradiated samples were then annealed in a vacuum furnace at temperatures ranging from 773 K to 1073 K. Cross-sectional TEM observations and GIXRD measurements revealed that a layered structure is formed in the as-implanted specimen with ε-FeSi, β-FeSi₂ and damaged Si, as component layers. A continuous β-FeSi₂ layer was formed on the topmost layer of the Si substrate after thermal annealing.