Impact of Preferential P-Diffusion Along the Grain Boundaries on Fine-Grained Polysilicon Solar Cells

Thin-film polysilicon solar cells are a promising low-cost alternative for bulk silicon solar cells due to their reduced material thickness. Recently, we showed that the use of an amorphous silicon/polycrystalline silicon heterojunction emitter instead of a diffused homojunction emitter led to a boost in the open-circuit voltage by 90 mV. Now, we present a full evidence that shows that this improvement is related to the absence of dopant smearing along the grain boundaries. By using scanning spreading resistance microscopy, we found an enlargement of the junction area by a factor of five in case of a homojunction. The tips of the dopant spikes represent lowly doped areas with an enhanced recombination.     

Use of the ARPE-19 cell line as a model of RPE polarity: basolateral secretion of FGF5

PURPOSE: To determine the polarity of fibroblast growth factor 5 (FGF5) secretions from retinal pigment epithelium (RPE) cells and to examine the viability and utility of the ARPE-19 cell line as a model for the study of RPE polarity. METHODS: Influenza infection and adenovirus-mediated gene transfer were used to deliver and express genes encoding influenza hemagglutinin (HA), p75-NTR (a neurotrophin receptor), low-density lipoprotein (LDL) receptor (LDLR), and FGF5 in confluent monolayers of ARPE-19 cells. The localization of HA, p75-NTR, and LDLR was determined by confocal microscopy. Domain selective biotinylation assays were used to quantitatively determine the polarities of p75-NTR and LDLR. The secretion of FGF5 into the apical and basal media of ARPE-19 cultures was examined by immunoblot analysis of conditioned media. RESULTS: Hemagglutinin and p75-NTR were found to be localized on the apical surface of infected and transduced ARPE-19 cells. In contrast, LDLR was associated preferentially with the basolateral membrane of ARPE-19 cells. Biotinylation studies indicated that 84% of p75-NTR was present on the apical surface, and 79% of LDLR was basolaterally polarized. Over the course of 6 hours, more than 90% of the total secreted FGF5 protein accumulated in the basolateral media. CONCLUSIONS: ARPE-19 cells exhibit a polarized distribution of cell surface markers when examined by either confocal microscopy or surface-labeling assays. This indicates that the ARPE-19 cell line is a valid model for studies of RPE cell polarity. FGF5, a secreted protein normally produced by RPE cells, is accumulated preferentially in the basal media after only 6 hours, suggesting that it is vectorially secreted from the basolateral surface of ARPE-19 cells.     

Hybrid cam mechanisms

This paper investigates the problem of driving a machine with several reciprocating heavy inertias. The drive should also realize some programmable flexibility of the motion, so that the operation of the machine, e,g., synchronization between different motions and duration of standstills, can easily be modified. The use of a single servomotor for every motion is not the best solution, since it does not allow for energy recuperation. This means that the installed servomotor power will be much higher than the required net peak power for the machine as a whole. The presented solution, however, reduces the servomotor peak torque and power by one order of magnitude, and makes energy transfer between the motions possible. The hybrid cam mechanism consists of a hybrid drive, which is a combination of a servomotor, a constant velocity motor and a cam follower mechanism. The operation principle exploits the nonlinear characteristics of the cam to add flexibility at low cost of energy. The hybrid solution is particularly successful for motions involving high peak acceleration. In addition, the concept can be used to reject disturbances. Simulations show the performance of the hybrid cam mechanism.     

The role of trade literature in the communication system

Bibliometric methods in general undervalue technological research. This study examines the relation in literature between technological/industrial journals and scientific journals in the case of the plastics industry and polymer science. Trade-journals cannot be used in a straightforward bibliometric manner, but can be an aid in mapping the different groups and reveal the hidden communication between technological and scientific communities.     

Seven-pinhole tomography of the thyroid

In this paper we introduce a new application of the sevenpinhole (7P) collimator: tomographic imaging of the thyroid. The collimator design has been reoptimized for this particular application by diminishing the distance from the collimator plate to the crystal and by choosing a smaller pinhole diameter. To reconstruct thyroid images from the two-dimensional projection data we use a method which we developed for 7P tomographic imaging of the heart [1]. Phantom experiments and patient studies demonstrate that this new device is capable of producing tomographic images of good quality and high resolution. Therefore, it seems to offer a promising alternative to conventional planar imaging of the thyroid (using a single-pinhole collimator).     

Softening and melting mechanisms of polyamides interfering with sliding stability under adhesive conditions

The thermal stability of polymers is a main issue when used as friction elements under dry sliding. Cast polyamide grades processed with either natrium or magnesium catalysors are slid on a small-scale and a large-scale test configuration to reveal the effect of softening or degradation on the sliding stability and to investigate possibilities for extrapolation of friction and wear rates between both testing scales. The combination of softening and afterwards transition into the glassy state is detrimental for the sliding stability of natrium catalysed polyamides, characterised by heavy noise during sliding. A transfer film formed under continuous softening also provides high friction. Melting during initial sliding is necessary for stabilisation in both friction and wear, and eventual softening of a molten film near the end of the test then not deteriorates the sliding stability. Softening of magnesium catalysed polyamides is favourable for the formation of a coherent transfer film resulting in more stable sliding than natrium catalysed polyamides. The differences in softening mechanisms of both polyamide grades is correlated to structural changes investigated by thermal analysis and Raman spectroscopy: the γ crystalline structure prevails in magnesium catalysed samples and the α crystalline structure is predominant in natrium catalysed samples. For internal oil lubricated polyamides, a time dependent degradation of the polyamide bulk deteriorates the supply of internal oil lubricant to the sliding interface, resulting in high friction and wear under overload conditions. As the degradation mechanisms during sliding are strongly correlated to the test set-up, extrapolation is only possible for friction in a limited application range, while wear rates cannot be extrapolated.     

Relationship of peroxide value and thiobarbituric acid value to development of undesirable flavor characteristics in fats

The peroxide value and thiobarbituric acid value were compared with the flavor score for a series of different types of fats, with and without added monoglyceride and with and without different stabilizers. The data indicated that the flavor score cannot be estimated for any given fat from either the peroxide value or the thiobarbituric acid value. Either can be used to follow the development of off flavors in a given product or formulation but the relative level may vary from product to product. Presented at the AOCS Meeting in Minneapolis, 1963.     

Experimental research and prediction of the effect of chemical and biogenic sulfuric acid on different types of commercially produced concrete sewer pipes

New equipment and procedures for chemical and microbiological tests, simulating biogenic sulfuric acid corrosion in sewerage systems, are presented. Subsequent steps of immersion and drying, combined with mechanical abrasion, were applied to simulate events occurring in sewer systems. Both chemical and microbiological tests showed that the aggregate type had the largest effect on degradation. Concrete with limestone aggregates showed a smaller degradation depth than did the concrete with inert aggregates. The limestone aggregates locally created a buffering environment, protecting the cement paste. This was confirmed by microscopic analysis of the eroded surfaces. The production method of concrete pipes influenced durability through its effect on W/C ratio and water absorption values. In the microbiological tests, HSR Portland cement concrete performed slightly better than did the slag cement concrete. A possible explanation can be a more rapid colonisation by microorganisms of the surface of slag cement samples. A new method for degradation prediction was suggested based on the parameters alkalinity and water absorption (as a measure for concrete porosity).