Das Oxidationsverhalten von Heizleiter-Legierungen

The oxidation behaviour of resistance heater alloys The prime condition for the use of metals as resistance heaters is their capability of forming compact and well adhering layers of scale of low permeability. In this context the composition of the alloy (in particular ferritic steels and representatives from the system NiCr) Play an important role in so far as oxidation has frequently a selective character, so that certain constituents may be depleted. Adhesion is also a function of the temperature regime (constant or cycling temperature during scale formation) be-cause these conditions may give rise to internal stresses in the covering layer. A tool for measuring stresses in the scale layer and thus adhesion is in particular the vibration method. In non-oxidising atmospheres increased chromium contents are generally useful; on the one hand they improve resistance to carburation and On the other hand they have a favourable influence on the resistance of nickel alloys in sulfidising atmospheres.     

Organic Thin‐Film Photovoltaic Cells Based on Oligothiophenes with Reduced Bandgap

The best polymeric solar cells reported so far are based on a so‐called bulk heterojunction of a polythiophene as donor and a soluble fullerene derivative as acceptor. However, these cells still suffer from an unsatisfying photovoltage, typically below 0.7 V. Here, we show that we can achieve higher photovoltages using a new terthiophene end‐capped with electron withdrawing dicyanovinyl groups (DCV3T) that increase both the ionization energy and even more strongly the electron affinity of the compound. The new material is tested in cells using a photoactive heterojunction to separate the excitons generated in the oligomer and a p‐doped wide‐gap transport layer. The solar cells show an open circuit voltage of up to 1.04 V and a broad spectral sensitivity band ranging from 420 nm to 650 nm. Solar cells based on such oligothiophenes are promising candidates for stacked organic solar cells tailored to the sun‐spectrum. Moreover, we present first examples of a new concept for organic solar cells: By blending DCV3T with fullerene C₆₀, an enhanced generation of triplet excitons on the oligomer can be achieved via a back and forth transfer of excitons (ping‐pong‐effect).     

Numerical Modeling of Pulsed Raman Fiber Converters at 2 $mu{hbox {m}}$

Theoretical modeling of stimulated Raman scattering (SRS) in fibers is presented for the near-infrared band around 2 mum, where pump and Stokes wave have different absorption. This model takes into account amplified spontaneous emission (ASE), SRS towards Stokes and anti-Stokes waves, absorption of the Raman medium and Rayleigh backscattering in fibers. Depending on the fiber configuration, this model includes the cavity parameters of either external or internal mirrors at the fiber ends. Input parameters are, among others, temporal profiles of the pump radiation, absorption, and gain curve of the Raman medium. The model agrees well with experimental results obtained with a GeO₂ doped core fiber pumped by a pulsed and tunable Tm:silica fiber laser emitting around 2 mum.     

Human C-peptide. Part I: Radioimmunoassay

Synthetic human C-peptide bearing a Tyrosine group at its amino end is labelled with 125iodine using chloramin T or hydrogen peroxide and lactoperoxidase. The results are compared applying both methods. Antiserum to synthetic human C-peptide (without Tyrosine) which was partially compared to rabbit albumin, is raised in guinea pigs and goats. Goats show to be superior to guinea pigs concerning antibody production. The so-called "hook effect" phenomenon is observed in setting up the standard curves for the radioimmunoassay. Monotonically decreasing standard curves are obtained on dilution of antiserum with a high antibody titer which was produced by repeated immunization in goats. Free C-peptide and C-peptide bound to antiserum are separated with the anxion exchange resin Amberlite. Using this separation technique we excluded unspecific binding of labelled C-peptide to protein fractions in serum of diabetics. The sensitivity of our radioimmunoassay is approx. 0.3 ng C-peptide/ml serum. Intra- and interassay variability are below 10%. Human proinsulin is the only substance found to crossreact with the antiserum.     

Victrex® poly(ethersulfone) (PES) and Victrex® poly(etheretherketone) (PEEK)

Properties of two high performance engineering thermoplastics, amorphous polyethersulfone (PES) and semicrystalline polyetheretherketone (PEEK), are discussed. Both resins can be processed by conventional techniques, compounded with high performance fibers, and have high service temperature (up to 300°C). Due to the amorphous character PES can be dissolved and spray coated into metals.     

Starch derivatives with high degree of functionalization. III. Influence of reaction conditions and starting materials on molecular structure of carboxymethyl starch

Carboxymethyl starch (CMS) was prepared in a completely heterogeneous procedure in a methanol/water slurry activated with aqueous sodium hydroxide (45%, w/v) using monochloroacetic acid as the etherifying agent. The influence of the reaction conditions and the type of starting starch (amylose content and preactivation) was evaluated in regard to the formation of the main repeating units (i.e., unfunctionalized and mono‐, di‐, tri‐, and tetra‐O‐carboxymethylated) and the pattern of functionalization within the anhydroglucose units (AGU). The reproducible synthesis gave products with a maximal degree of substitution of CM groups (DS_CM) of 0.66, which was reached in a one‐step synthesis. Repeated carboxymethylation led to products with a DS_CM of 0.88. As revealed by means of HPLC analysis after complete acidic depolymerization, in any sample the mono‐O‐carboxymethylated glucose (mono‐O‐CMglc) was preferably present while the di‐O‐CMglc was formed to a very low extent only. The tri‐O‐CMglc was found in some samples while tetra‐O‐CMglc was not detected. The mole fractions determined did not follow the simple Spurlin statistic as shown for CM cellulose synthesized under comparable conditions. Within the carboxymethylated AGUs a preferred functionalization at position 2 was analyzed by means of ¹H‐NMR spectroscopy after hydrolytic chain degradation. Consequently, the CMS samples synthesized contained mainly 2‐mono‐O‐CM‐AGU. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 2036–2044, 2001