Coupled instability of thin-walled members under combined bending moment, axial and shear force

In this paper we analyse the behaviour of thin-walled steel members with an I-shaped cross-section, in the presence of phenomena of coupled instability as overall-local type and combined state of stress of bending moment, axial and shear force. The analysis has been made by the ‘column model method’ and it has been used for bending moment-curvature-axial force diagrams, modified by the presence of local instability for web buckling of steel beams.

The previous analysis allows one to define interaction diagrams M_Imax−λ−N, which can be used to check the steel members in relation to the overall slenderness and the local slenderness of the web panel.     

Origin of HIV-1 in the chimpanzee Pan troglodytes troglodytes

The human AIDS viruses human immunodeficiency virus type 1 (HIV-1) and type 2 (HIV-2) represent cross-species (zoonotic) infections. Although the primate reservoir of HIV-2 has been clearly identified as the sooty mangabey (Cercocebus atys), the origin of HIV-1 remains uncertain. Viruses related to HIV-1 have been isolated from the common chimpanzee (Pan troglodytes), but only three such SIVcpz infections have been documented, one of which involved a virus so divergent that it might represent a different primate lentiviral lineage. In a search for the HIV-1 reservoir, we have now sequenced the genome of a new SIVcpzstrain (SIVcpzUS) and have determined, by mitochondrial DNA analysis, the subspecies identity of all known SIVcpz-infected chimpanzees. We find that two chimpanzee subspecies in Africa, the central P. t. troglodytes and the eastern P. t. schweinfurthii, harbour SIVcpz and that their respective viruses form two highly divergent (but subspecies-specific) phylogenetic lineages. All HIV-1 strains known to infect man, including HIV-1 groups M, N and O, are closely related to just one of these SIVcpz lineages, that found in P. t. troglodytes. Moreover, we find that HIV-1 group N is a mosaic of SIVcpzUS- and HIV-1-related sequences, indicating an ancestral recombination event in a chimpanzee host. These results, together with the observation that the natural range of P. t. troglodytes coincides uniquely with areas of HIV-1 group M, N and O endemicity, indicate that P. t. troglodytes is the primary reservoir for HIV-1 and has been the source of at least three independent introductions of SIVcpz into the human population.     

电液比例控制技术在电解铜堆垛上的应用

采用电液比例控制技术对电解铜堆垛装置进行控制。分析了控制的工作原理及实现方法;探讨了系统的稳定性;采用PID校正技术对系统的稳定性进行校正。     

On the Improvement of the Processability of UHMW‐HDPE by Adding a Liquid Crystalline Polymer and a Fluoroelastomer

Ultra‐high molecular weight polyethylene possesses many interesting properties but a very bad processability. This material is not usually processed in conventional devices but only by compression moulding and RAM extrusion. Low molecular weight polyethylene can be used to improve the processability. In this work small amounts of a fluoroelastomer and of a liquid crystalline polymer have been used as processing aids to improve the extrudability of this polymer. In fact, the die pressure decreases whereas the output flow rate slightly increases with increasing concentration of the processing aids. Solution viscosity data shows that reduction of the mechanical stress during extrusion decreases the degradation of the polyethylene.     

EFFECT OF ULTRASONIC TREATMENTS ON THERMOACIDOPHILIC ALICYCLOBACILLUS ACIDOTERRESTRIS IN APPLE JUICE

The effect of ultrasonic treatments on Alicyclobacillus acidoterrestris in apple juice was investigated. In general, inactivation of the cells was more pronounced at an elevated power level and as the processing time increased. Approximately 60% of the cells were inactivated after treating the apple juice with 300-W ultrasound for 30 min. The reduction reached more than 80% when the juice was processed for 60 min. The linear inactivation rates ( D values) of ultrasound on A. acidoterrestris were both process- and strain-dependent. The lowest D value at 36.18 min was found when using 600-W ultrasound to treat the A30 strain isolated from the air of a commercial apple juice processing plant, whereas the strain isolated from apple juice concentrate was found most resistant against ultrasound. Changes of sugar content, acidity, haze and juice browning were noted after ultrasonic treatments but did not adversely alter the juice quality.

PRACTICAL APPLICATIONS

Characterization of the effects of ultrasonic treatments on thermoacidophilic Alicyclobacillus acidoterrestris provides better understanding of how ultrasound technology could assist in alleviating the hard-to-detect spoilage caused by this spore former. Although ultrasonic technology might not be suitable as a standalone unit operation to inactivate high cell loads, the process could be integrated with other thermal or nonthermal technologies to enhance processing efficiencies, consequently preventing microbial spoilage caused by A. acidoterrestris .     

EFFECTS OF INTERMOLECULAR INTERACTIONS AND MOLECULAR ORIENTATION ON THE FLUX BEHAVIOR OF XANTHAN GUM SOLUTIONS DURING ULTRAFILTRATION

Conformational changes of xanthan gum as a function of concentration were investigated to elucidate its unusual flux behavior during ultrafiltration (UF). The contribution of hydrogen bonding on structure formation and the molecular orientation of xanthan gum on the flow characteristics were studied rheomechanically and rheo-optically. Known to affect xanthan structure at low concentrations, hydrogen bonding unexpectedly did not show significant influence on xanthan rheological properties up to 2 wt %. The ordered layers formed on the membrane surface proved responsible for the enhanced water removal during UF. This unique behavior could be attributed to the formation of aligned molecular orientation in addition to the viscosity increases during the biphasic region. Significant differences were observed between xanthan fermentation broth and solutions made of commercial xanthan, suggesting the need to control the salt concentration in fermentation broth in order to make UF an effective recovery process for xanthan gum after fermentation.

PRACTICAL APPLICATIONS

The knowledge gained from the present study strengthens fundamental understandings on the conformational changes of xanthan biopolymers during the recovery of xanthan gum from fermentation broth using ultrafiltration (UF). By taking advantage of the aligned molecular orientation, along with controlling the salt concentration in the fermentation broth, UF could be operated at elevated flux to speed up the removal of water from the viscous fermentation broth. The technology should find broad applications in the fermentation industry, especially where viscosity is of concern during the separation and purification of the product.     

Profiling of hydrophilic proteins from Olea europaea olive pollen by MALDI TOF mass spectrometry

The antigenic profile of Olea europaea pollen from different Mediterranean cultivars was obtained by MALDI mass spectrometry. A simple procedure of chemical fractionation of the whole antigen extract was developed, whereby less complex, or pure, fractions of antigen candidate were obtained prior to mass spectrometric analysis. Some of the features of protein structure and distribution probably depend on cultivar adaptation to the environment. The profilings of pollen proteins thus obtained allow the distinction of the analyzed cultivars into three distinct groups: (i) those characterized by a low Ole e 1 content; (ii) those over-enriched in Ole e 1 and (iii) that containing Ole e 3 and Ole e 7 only. The latter consists of at least four isoforms differing by the degree of glycosilation. These results demonstrate that the proposed experimental procedure, can supply valuable information on the antigens' micro heterogeneity.     

Influence of water on bond behavior between CFRP sheet and natural calcareous stones

In this paper the effect of a long term immersion in water on bond durability is analyzed when FRPs (Fiber Reinforced Plastic) are externally applied to a masonry substrate. In the performed research a substrate made by natural calcareous stones, strengthened by CFRP (Carbon Fiber Reinforced Plastic) sheets has been analyzed. For a better comprehension of water effect on the adhesive bond between stone and CFRP, the same treatments were performed to the constituent materials, namely epoxy resins, CFRP sheets and stones. To this aim mechanical tests were carried out on stone, composite materials and epoxy resins before and after their immersion in water, evaluating the effects of this agent on the properties of the materials. The influence of the aging in water on the interface stone-reinforcement was analyzed in terms of bond strength, maximum bond stress, optimal bond length, slip-bond stress relationship and mode of failure. In addition the possibility of calibrating design relationships, taking into account the influence of environmental conditions is discussed. Detailed results on adhesives and composites aged in water have been reported in a previous paper while in the present work the significant decay of the mechanical properties of the stone is specifically investigated. With regard to the conditioning treatment a reduction of the bond strength has been observed (up to 26%) as well as a similar decrease of the maximum bond stress; in addition the aged specimens have shown a more fragile behavior. On the basis of the obtained results the empirical coefficient, reported in the available Italian Guidelines, to determine the FRP-masonry bond strength seems still effective when the system FRP-masonry is aged in water once the properties of the aged materials are considered in the provided relationships.     

The solid modelling of part orienting tracks for automated assembly

Part orienting tracks used for feeding component parts to an automated assembly system are conventionally designed and fabricated manually by increasingly small numbers of skilled operators. It is time-consuming, labour-intensive and hence results in expensive tooling cost and long manufacture lead time. A new approach based on solid modelling has been developed to facilitate efficient track design and manufacture

This paper presents the methodology adopted in the development and implementation of the CAD system. It describes the conceptual model of an orienting track, discusses the overall data structure of the system, and outlines the method used in modelling tracks. The paper concludes with an example demonstrating how an orienting track can be designed using the CAD system.