Avalanche buildup time of InP/InGaAsP/InGaAs avalanche photodiodes with separate absorption, grading, and multiplication regions

The avalanche buildup time of an avalanche photodiode can be determined from the frequency response of the noise power as a function of the dc multiplication M0. In this paper we report on the first measurements of the avalanche buildup time of InP/InGaAsP/ InGaAs avalanche photodiodes with separate absorption, grading, and multiplication regions (SAGM-APD's). Measurements on several different device structures reveal that the avalanche buildup time (gain-bandwidth product) decreases (increases) with increasing carrier concentration in the multiplication region. The shortest buildup time that we have observed wasM_{0} times 4.2ps which corresponds to a gain-bandwidth Product of 38 GHz.     

Simple material parameter estimation via terahertz time-domain spectroscopy

A simple and precise method based on fixed-point iteration is used to estimate dielectric parameters using terahertz time-domain spectroscopy (THz-TDS). The method converges and gives correct parameters when the sample thickness is greater than 200 /spl mu/m at a frequency of 0.1 THz or 20 /spl mu/m at a frequency of 1.0 THz. The technique in validated using measured terahertz data, obtained by probing a sample of high-resistivity silicon.     

Creating low-impedance tetrodes by electroplating with additives

A tetrode is a bundle of four microwires that can record from multiple neurons simultaneously in the brain of a freely moving animal. Tetrodes are usually electroplated to reduce impedances from 2-3 MΩ to 200-500 kΩ (measured at 1 kHz), which increases the signal-to-noise ratio and allows for the recording of small amplitude signals. Tetrodes with even lower impedances could improve neural recordings but cannot be made using standard electroplating methods without shorting. We were able to electroplate tetrodes to 30-70 kΩ by adding polyethylene glycol (PEG) or multi-walled carbon nanotube (MWCNT) solutions to a commercial gold-plating solution. The MWCNTs and PEG acted as inhibitors in the electroplating process and created large-surface-area, low-impedance coatings on the tetrode tips.     

A look at physical simulation of metallurgical processes,past, present and future

The year 2007 marks the 50th anniversary of the founding of Dynamic Systems Inc., the developer and manufacturer of Gleeble physical simulation systems. From the initial welding simulators in the 1950s to today's complex rolling simulators and multi-axis nano-material development tools, the evolution of equipment for physical simulation research has evolved along several paths. In each case, a need to develop or improve processes and materials has pushed the technology to new levels. This paper takes a brief look at the historical developments of physical simulation tools over the last 50 years and reviews a number of significant milestones in the evolving science of physical simulation. After a historical review, the current technologies and accomplishments are discussed. This includes a look at the most recent developing methods such as the use of laser ultrasonics to gather real-time microstructure information during the simulation. This paper also reviews recent work in simulating thin slab continuous casting. Finally a look at what may be expected in the future for physical simulation is presented.     

Basic processes in reading: Can functional phonological recoding be blocked?

A widely held view is that phonological processing is always involved in lexical access from print, and is automatic in that it cannot be prevented. This claim was assessed in the context of a priming paradigm. In Experiment 1, repetition priming was observed for both pseudohomophone-word pairs (e.g., brane-brain) and morphologically related word pairs (e.g., marked-mark) in the context of lexical decision. In Experiment 2, subjects searched the prime for the presence of a target letter and then made a lexical decision to a subsequent letter string. Phonological priming from a pseudohomophone was eliminated following letter search of the prime, whereas morphological priming persisted. These results are inconsistent with the claim that a) lexical access from print requires preliminary phonological processing, and b) functional phonological processing cannot be blocked. They are, however, consistent with the conclusion that, for intact skilled readers, lexical access can be accomplished on the basis of orthographic processing alone. These results join a growing body of evidence supporting the claim that there exist numerous points in visual word recognition at which processing can be stopped. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Feasibility of assessing dermal exposure to PAHs of workers on gaswork sites--the SOLEX study

Population exposure to pollutants in soil is an important public health concern. Difficult to measure, it is usually estimated using multimedia models. Modeling data predict that the skin surface is a predominant exposure route in roughly 15% of the US Superfund sites. Nonetheless, no study has confirmed these predictions. The SOLEX study was an opportunity to study the feasibility of estimating the cutaneous polycyclic aromatic hydrocarbons (PAHs: all 16 of the United States Environmental Protection Agency list) load of workers at three former manufactured gas sites, one of those being under remediation. Over two measurement periods (November 1997 and June 1998), 30 and 28 volunteers, respectively, were equipped for a single day work with five pads that collected soil particles and were placed at the neck, shoulder, wrist, groin, and ankle. Pad contamination was observed for six of the nine workers on the site being remediated but not on other sites. The wrist pad was most often affected, followed by the neck pad, these are, the exposed regions of the body. The PAHs most frequently identified were anthracene, fluoranthene, naphthalene, phenanthrene, and pyrene, at concentrations relatively high. In conclusion, this study showed that estimating skin exposure to soil pollutants is feasible. Secondly, it suggested that only subjects in close contact with the soil had a detectable exposure to PAHs. Extension of this approach to other exposure settings is warranted, especially among children playing in polluted public or private gardens, because their games lead to frequent contact with the soil.     

Synchronously pumped optical parametric oscillation in periodically poled lithium niobate with 1-w average output power

We report on a rugged all-solid-state laser source of near-IR radiation in the range of 1461-1601 nm based on a high-power Nd:YVO(4) laser that is mode locked by a semiconductor saturable Bragg reflector as the pump source of a synchronously pumped optical parametric oscillator with a periodically poled lithium niobate crystal. The system produces 34-ps pulses with a high repetition rate of 235 MHz and an average output power of 1 W. The relatively long pulses lead to wide cavity detuning tolerances. The comparatively narrow spectral bandwidth of <15 GHz is suitable for applications such as pollutant detection.