Molecular Heterojunctions of Oligo(phenylene ethynylene)s with Linear to Cruciform Framework

Electrical transport properties of molecular junctions are fundamentally affected by the energy alignment between molecular frontier orbitals (highest occupied molecular orbital (HOMO) or lowest unoccupied molecular orbital (LUMO)) and Fermi level (or work function) of electrode metals. Dithiafulvene (DTF) is used as substituent group to the oligo(phenylene ethynylene) (OPE) molecular wires and different molecular structures based on OPE3 backbone (with linear to cruciform framework) are achieved, with viable molecular orbitals and HOMO–LUMO energy gaps. OPE3, OPE3–DTF, and OPE3–tetrathiafulvalene (TTF) can form good self‐assembled monolayers (SAMs) on Au substrates. Molecular heterojunctions based on these SAMs are investigated using conducting probe–atomic force microscopy with different tips (Ag, Au, and Pt) and Fermi levels. The calibrated conductance values follow the sequence OPE3–TTF > OPE3–DTF > OPE3 irrespective of the tip metal. Rectification properties (or diode behavior) are observed in case of the Ag tip for which the work function is furthest from the HOMO levels of the OPE3s. Quantum chemical calculations of the transmission qualitatively agree with the experimental data and reproduce the substituent effect of DTF. Zero‐bias conductance, and symmetric or asymmetric couplings to the electrodes are investigated. The results indicate that improved fidelity of molecular transport measurements may be achieved by systematic studies of homologues series of molecular wires applying several different metal electrodes.     

Comparative study on the heat transfer performance of micro-grooved anodized thermosyphon with R134a,R600a and R717 for low-temperature applications

Journal of Mechanical Science and Technology - A comparative heat transfer performance of an internally grooved anodized thermosyphon with eco-friendly refrigerants is presented in this study....     

Effect of two different rubbers as secondary binders on the friction and wear characteristics of non-asbestos organic (NAO) brake friction materials

Binder provides structural integrity by holding all ingredients in the composition of a brake friction material. The modified binders have played a major role in improving the frictional performance and thermal resistance of the friction material. The present research work evaluates the influence of secondary binders (Nitrile Butadiene rubber (NBR) and Styrene Butadiene rubber (SBR)) on the tribological performance of the friction material using a full-scale inertia brake dynamometer as per JASO C406 standard. Three brake pads were developed by varying the type and composition of secondary rubber binder (5%NBR, 5%SBR and 2.5%NBR + 2.5%SBR) with rest of the ingredients kept unaltered. It was found that the quantity of SBR rubber powder present as secondary binder improved dry and wet recovery. Friction coefficient (μ) exhibited better stability during the fade with the inclusion of both the rubber powders. The friction material with the inclusion of both the NBR and SBR rubber powders exhibited overall better performance than compared to the inclusion of only one secondary binder rubber in the composition. The worn-out surface of the developed friction materials and the counter discs were characterised using FESEM.     

Measurement and modeling of lignin pyrolysis

Pyrolysis of lignin is one approach that has been investigated to upgrade this material into higher value products. However, there have been relatively few efforts to quantitatively model these reactions. This paper describes a methodology for modeling lignin pyrolysis which has been extensively developed for related materials like coal. The samples are characterized using pyrolysis experiments under a standard set of conditions, where the products are analyzed by Fourier Transform Infrared (FT-IR) Spectroscopy and Field Ionization Mass Spectrometry (FIMS). Solvent extraction experiments are done to determine the extractables yields and elemental analysis is done to further constrain the model.

One lignin, produced from ethanol/water extraction of mixed hardwoods, was selected for the application of this modeling approach. The model was able to qualitatively predict the tar molecular weight distributions and quantitatively predict the variations of the gas and tar evolution rates and yields with heating rate for the calibration set of experiments. The model can be improved by more precise information on lignin structure, crosslinking chemistry, and tar transport mechanisms. It also needs to be validated by simulation of pyrolysis conditions at high heating rates and/or high pressures for which data is currently not available.     

Nanocrystalline scheelite SrWO4: a low temperature co-fired ceramic optical material-synthesis and properties

Nanocrystalline strontium tungstate (SrWO₄) is synthesized through a single step modified combustion process. The X-ray diffraction, Fourier transform Raman and Infrared spectroscopy studies reveal that the as-prepared powder is single phase and possess tetragonal structure. The transmission electron microscopic investigations have shown that the particle size of the as prepared powder is in the range 18–22 nm. The optical constants are estimated from the UV–Visible studies and calculated optical band gap is 4.28 eV. The sample showed maximum transmission in the visible regions but poor transmittance in the ultraviolet region. The photoluminescence spectra recorded at different temperatures showed intense blue emission. The nanocrystalline SrWO₄ obtained by the present combustion method was sintered to 95 % density at a relatively lower temperature of 810 °C for 3 h. The dielectric constant (ε_r) and loss factor (tan δ) of the sintered SrWO₄ pellets at 5 MHz measured at room temperature were 9.9 and 6.29 × 10^?3 respectively. The experimental results obtained in this work demonstrate the application of SrWO₄ as UV filters, transparent films for window layers on solar cells, anti-reflection coatings, scintillators, detectors and for low-temperature co-fired ceramic applications.     

Curcumin and Liver Disease: from Chemistry to Medicine

Curcumin, the natural yellow‐colored active principle, also called turmeric yellow, extracted from the perennial herb Curcuma longa L., has potent biological and pharmacological properties such as antioxidant, anti‐inflammatory, antifungal, antibacterial, anti‐ischemic, antitumor, and anticancer actions. The molecular mechanism of the hepatoprotective action of curcumin is due to its antioxidant properties and inhibitory activity against nuclear factor (NF)‐κB that regulates different proinflammatory and profibrotic cytokines. Overall, scientific reports demonstrate that curcumin has high therapeutic ability for treating hepatic disorders. Here is a systematic discussion of the hepatoprotective activity of curcumin and its possible mechanisms of actions.     

Metal recovery from jarosite waste – A resin screening study

Work has been carried out screening hydrometallurgical resins for application in the valorization of industrially produced jarosite. Of the seven resins tested, anion exchange resins performed poorly for valuable metal recovery. Purolite S950+ and S957, along with a strong acid resin, show good extraction properties, but are selective for Fe³⁺ over the other (divalent) metals. Purolite S930+ (iminodiacetic acid-functionalized resin) demonstrates selectivity for Cu²⁺ over Fe³⁺, but poor selectivity for Ni²⁺, Zn²⁺, and Co²⁺. Dowex M4195 (bispicolylamine-functionalized resin) demonstrates promise for extracting metals of value away from a mixed metal pregnant liquor solution (PLS). A three-stage column-based recovery process is proposed for jarosite leachate treatment.     

Reduction of spoilage microorganisms in fresh beef using hydrodynamic pressure processing

Hydrodynamic pressure processing (HDP) was investigated as a technology to reduce spoilage microorganisms found in fresh beef. In two separate studies (studies 1 and 2), retail ground beef and beef roasts were purchased (day 0). The roasts were divided into stew pieces (30 to 40 g). All meat samples, including control samples, were stored at 5 degrees C for 20 h in a plastic film. After storage, designated samples were treated with HDP In study 3, ground beef was treated with HDP (day 0) and stored aerobically (5 degrees C) for 14 days with control samples. Each meat type was vacuum-packaged for HDP (100 g binary explosive, steel shock wave container). The pHs and the aerobic plate counts (log10 CFU/g) were measured on day 0 (studies I and 2) and on days 0, 7, and 14 (study 3) for control samples and for HDP-treated samples. There was no pH difference between control and HDP-treated meat types (studies 1 and 2); HDP reduced bacteria in both meat types in study 1 (2 log) and study 2 (1.5 log) on day 0. In study 3, there was a significant difference (P < 0.05) in pH between control meat (8.2) and HDP-treated meat (5.6) after storage. There was an immediate reduction (1.5 log) of microorganisms following HDP (day 0) and a 4.5-log difference between control samples (9 log) and HDP-treated samples (4.5) after 14 days of storage. With HDP, it is possible to reduce spoilage microorganisms found in or on different meat types (ground beef versus stew pieces), which could extend the shelf life of meat products.     

Effect of irrigation method on transmission to and persistence of Escherichia coli O157:H7 on lettuce

In this study, the transmission of Escherichia coli O157:H7 to lettuce plants through spray and surface irrigation was demonstrated. For all treatments combined, the number of plants testing positive following a single exposure to E. coli O157: H7 through spray irrigation (29 of 32 plants) was larger than the number testing positive following surface irrigation (6 of 32 plants). E. coli O157:H7 persisted on 9 of 11 plants for 20 days following spray irrigation with contaminated water. Immersion of harvested lettuce heads for 1 min in a 200 ppm chlorine solution did not eliminate all E. coli O157:H7 cells. The results of this study suggest that regardless of the irrigation method used, crops can become contaminated; therefore, the irrigation of food crops with water of unknown microbial quality should be avoided.     

Toll road crashes of commercial and passenger motor vehicles

Revenue-collection data from toll roads allow for accurate estimates of miles driven by vehicle type and, when combined with crash data, valid estimates of crash involvements per mile driven. Data on vehicle-miles traveled and collisions were obtained from toll road authorities in Florida. Kansas, and New York. In addition, state crash files and published vehicle-miles of travel were obtained for toll roads in Illinois. Indiana, Ohio, and Pennsylvania. Large commercial motor vehicles were significantly underinvolved in single-vehicle crashes on all state toll roads. In five states, commercial motor vehicles were significantly overinvolved in multiple-vehicle crashes relative to passenger vehicles; the exceptions were Kansas, where they had significantly lower multiple-vehicle involvement rates, and Indiana. where there were no significant differences in multiple-vehicle involvements by vehicle type. The risk of commercial motor vehicle involvement in multiple-vehicle crashes resulting in deaths or serious injuries was double that of passenger vehicles in the two states (Ohio and Pennsylvania) that identified serious injuries. Whether crash rates, on toll roads of commercial motor vehicles are higher or lower than those of passenger vehicles appears to depend on the type of crash, specific toll road. and traffic density.