Biogenesis of cellulolytic enzymes by Trichoderma ligorum on media with "inductor"

Identical distribution of C2- and Cx-cellulase activities of enzyme complexes produced by Trichoderma lignorum on a medium with lactose, a soluble "inductor", and on a medium with cellulose was found by means of disc elestrophoresis in polyacrylamide gel. The maximum rate of synthesis of cellulases on the medium with lactose was registered during the highest deceleration, and even complete cessation, of the fungal growth. During this phase, only one electrophoretically homogeneous cellulase component with Rf of 0.44 possessing all types of the cellulase activity is present in the cultural broth. In the course of growth of the fungus on cellulose after 48 hours, also only one electrophoretically homogeneous component with Rf of 0.44 was found in the cultural broth when the rate of the substrate degradation was highest. The appearance of minor protein components with the activity of cellulase at later stages of cultivation after cessation of the fungal growth is supposed to be caused by modification of the main cellulase component with Rf of 0.44 by the growth medium.     

Subsystem inference representation for fuzzy systems based uponproduct-sum-gravity rule

A new representation which expresses a product-sum-gravity (PSG) inference in terms of additive and multiplicative subsystem inferences of single variable is proposed. The representation yields additional insight into the structure of a fuzzy system and produces an approximate functional characterization of its inferred output. The form of the approximating function is dictated by the choice or polynomial, sinusoidal, or other designs of subsystem inferences. With polynomial inferences, the inferred output approximates a polynomial function the order of which is dependent on the numbers of input membership functions. Explicit expressions for the function and corresponding error of approximation are readily obtained for analysis. Subsystem inferences emulating sinusoidal functions are also discussed. With proper scaling, they produce a set of orthonormal subsystem inferences. The orthonormal set points to a possible “modal” analysis of fuzzy inference and yields solution to an additive decomposable approximation problem. This work also shows that, as the numbers of input membership functions become large, a fuzzy system with PSG inference would converge toward polynomial or Fourier series expansions. The result suggests a new framework to consider fuzzy systems as universal approximators     

Human SMILE-Derived Stromal Lenticule Scaffold for Regenerative Therapy: Review and Perspectives

A transparent cornea is paramount for vision. Corneal opacity is one of the leading causes of blindness. Although conventional corneal transplantation has been successful in recovering patients’ vision, the outcomes are challenged by a global lack of donor tissue availability. Bioengineered corneal tissues are gaining momentum as a new source for corneal wound healing and scar management. Extracellular matrix (ECM)-scaffold-based engineering offers a new perspective on corneal regenerative medicine. Ultrathin stromal laminar tissues obtained from lenticule-based refractive correction procedures, such as SMall Incision Lenticule Extraction (SMILE), are an accessible and novel source of collagen-rich ECM scaffolds with high mechanical strength, biocompatibility, and transparency. After customization (including decellularization), these lenticules can serve as an acellular scaffold niche to repopulate cells, including stromal keratocytes and stem cells, with functional phenotypes. The intrastromal transplantation of these cell/tissue composites can regenerate native-like corneal stromal tissue and restore corneal transparency. This review highlights the current status of ECM-scaffold-based engineering with cells, along with the development of drug and growth factor delivery systems, and elucidates the potential uses of stromal lenticule scaffolds in regenerative therapeutics.     

Video game training to improve selective visual attention in older adults

The current study investigated the effect of video game training on older adult’s useful field of view performance (the UFOV® test). Fifty-eight older adult participants were randomized to receive practice with the target action game (Medal of Honor), a placebo control arcade game (Tetris), a clinically validated UFOV training program, or into a no contact control group. Examining pretest–posttest change in selective visual attention, the UFOV improved significantly more than the game groups; all three intervention groups improved significantly more than no-contact controls. There was a lack of difference between the two game conditions, differing from findings with younger adults. Discussion considers whether games posing less challenge might still be effective interventions for elders, and whether optimal training dosages should be higher.     

Comparative study of porous anodic alumina: effects of aluminium deposition methods

This article reports on the comparative study of the fabrication of porous anodic alumina films by anodisation of the aluminium films on glass substrates which were deposited by direct current sputtering and electron beam evaporation methods. The relationship between surface morphology of the deposited aluminum films and porous anodic alumina films was investigated. A more uniform and ordered porous anodic alumina was obtained by fabricating from electron beam evaporation deposited aluminium film with smaller and compact grains. Two-step anodisation was used to further improve the quality of porous anodic alumina compared to one-step anodisation. The optical transmittance spectra within wavelength of 370–800 nm were obtained and the optical properties were studied.     

Numerical study on erosion of a pipe bend with a vortex chamber

Abrasive erosion at bend is a common issue in gas–solid pneumatic system. Vortex chamber design is one of the specialized designs that offers promising prospect at reducing erosion. The performance of design is still relatively unknown in the literature. The aim of this work is to study the effect of basic erosion variables such as the flow Reynolds number, the particle Stokes number, and the vortex chamber size. The results show that the vortex chamber always reduces the erosion in comparison to the common radius bend, and it is more effective at higher Reynolds number. Increasing the chamber size reduces the erosion but the most significant reduction happens when the chamber size to the pipe diameter ratio is increased from 1 to 1.25. The chamber size influences the erosion differently at different Reynolds number. Trends describing these effects were obtained through trial-and-error approach. The particle Stokes number has nonunique effect on erosion. Increasing Stokes number through increasing Re increases the erosion while increasing Stokes number through decreasing Re_p decreases the erosion.     

Raman fiber oscillator as optical amplifier

A Raman fiber oscillator used for optical amplification is demonstrated to have lower double Rayleigh scattering, transient spikes, cross-phase modulation, and higher saturation input threshold compared with a conventional discrete Raman amplifier at similar operating conditions. This could be a promising technology for deployment in practical systems.     

Comparative evaluation of surfactant and hydrophobizing agent concentration in relation to the optimal particle size of metered-dose inhalers

The aim of the present study was to formulate stabilized suspension-type metered-dose inhalation aerosols, and to examine the connection between the stabilizing additives and the optimal particle size. For the stabilization of the suspended particles, hydrophilic- and hydrophobic-type additives were applied. Oleil oleate was selected as a hydrophilic anionic surfactant, and the hydrophobizing agent was dimethyl siloxane polymer. The effect of the amount of the applied hydrophilic and hydrophobic additives on the optimal particle size was modeled by a second-order polynomial equation fitted to the data gathered by a face-centered central composite statistical design. We found that if the proper type and amount of additives are selected, it is possible to acquire the therapeutically best composition.     

Mutation of serine-46 to aspartate in the histidine-containing protein of Escherichia coli mimics the inactivation by phosphorylation of serine-46 in HPrs from gram-positive bacteria

Histidine-containing protein (HPr) is a phosphocarrier protein of the bacterial phosphoenolpyruvate:sugar phosphotransferase system. HPr is phosphorylated at the active site residue, His15, by phosphoenolpyruvate-dependent enzyme I in the first enzyme reaction in the process of phosphoryl transfer to sugar. In many Gram-positive bacterial species HPr may also be phosphorylated at Ser46 by an ATP-dependent protein kinase but not in the Gram-negative Escherichia coli and Salmonella typhimurium. One effect of the phosphorylation at Ser46 is to make HPr a poor acceptor for phosphorylation at His15. In Bacillus subtilis HPr, the mutation Ser46Asp mimics the effects of phosphorylation. A series of mutations were made at Ser46 in E. coli HPr: Ala, Arg, Asn, Asp, Glu, and Gly. The two acidic replacements mimic the effects of phosphorylation of Ser46 in HPrs from Gram-positive bacteria. In particular, when mutated to Asp46, the His 15 phosphoacceptor activity (enzyme I Km/Kcat) decreases by about 2000-fold (enzyme I Km, 4 mM HPr; Kcat, approximately 30%). The alanine and glycine mutations had near-wild-type properties, and the asparagine and arginine mutations yielded small changes to the Km values. The crystallographic tertiary structure of Ser46Asp HPr has been determined at 1.5 A resolution, and several changes have been observed which appear to be the effect of the mutation. There is a tightening of helix B, which is demonstrated by a consistent shortening of hydrogen bond lengths throughout the helix as compared to the wild-type structure. There is a repositioning of the Gly54 residue to adopt a 3(10) helical pattern which is not present in the wild-type HPr. In addition, the higher resolution of the mutant structure allows for a more definitive placement of the carbonyl of Pro11. The consequence of this change is that there is no torsion angle strain at residue 16. This result suggests that there is no active site torsion angle strain in wild-type E. coli HPr. The lack of substantial change at the active center of E. coli HPr Ser46Asp HPr suggests that the effect of the Ser46 phosphorylation in HPrs from Gram-positive bacteria is due to an electrostatic interference with enzyme I binding.