浅谈T5荧光灯支架质量问题和性价比

根据标准要求和实际应用,讨论T5荧光灯支架几个应注意的质量问题并分析其性价比。     

Development of a PCR assay for the detection of nifH and nifD genes in indigenous photosynthetic bacteria

Molybdenum (Mo) nitrogenases consist of two components: dinitrogenase reductase (encoded by nifH) and the dinitrogenase or MoFe protein (encoded by nifDK). Nitrogenase enzyme of photosynthetic bacteria is responsible for hydrogen production. Therefore, primers were designed for the nitrogenase gene only. In this study, two primers (ND and NH) were designed after comparative genomic analysis of nifH and nifD gene sequences from public databases. The designed primers were used for the amplification of nifH and nifD genes to detect nitrogenase genes in photosynthetic bacteria. Initial detection was done using a monoplex Polymerase Chain Reactions (PCRs) followed by optimization of the PCR protocols. Subsequently, a duplex PCR was designed for amplification and detection of nifH and nifD genes in indigenous photosynthetic bacteria. Evaluation of the duplex PCR on six samples isolated from Palm Oil Mill Effluent (POME) showed that only four isolates contained both the nifH and nifD genes, indicating that these isolates were potential hydrogen-producing bacteria. PCR detection provides a rapid and efficient pre-identification of potential photosynthetic bacterial hydrogen producers.     

Advanced treatment of biologically pretreated coking wastewater by electrochemical oxidation using boron-doped diamond electrodes

Electrochemical oxidation is a promising technology to treatment of bio-refractory wastewater. Coking wastewater contains high concentration of refractory and toxic compounds and the water quality usually cannot meet the discharge standards after conventional biological treatment processes. This paper initially investigated the electrochemical oxidation using boron-doped diamond (BDD) anode for advanced treatment of coking wastewater. Under the experimental conditions (current density 20-60 mA cm⁻², pH 3-11, and temperature 20-60 °C) using BDD anode, complete mineralization of organic pollutants was almost achieved, and surplus ammonia-nitrogen (NH₃-N) was further removed thoroughly when pH was not adjusted or at alkaline value. Moreover, the TOC and NH₃-N removal rates in BDD anode cell were much greater than those in other common anode systems such as SnO₂ and PbO₂ anodes cells. Given the same target to meet the National Discharge Standard of China, the energy consumption of 64 kWh kgCOD⁻¹ observed in BDD anode system was only about 60% as much as those observed in SnO₂ and PbO₂ anode systems. Further investigation revealed that, in BDD anode cell, organic pollutants were mainly degraded by reaction with free hydroxyl radicals and electrogenerated oxidants (S₂O₈²⁻, H₂O₂, and other oxidants) played a less important role, while direct electrochemical oxidation and indirect electrochemical oxidation mediated by active chlorine can be negligible. These results showed great potential of BDD anode system in engineering application as a final treatment of coking wastewater.     

Suppression of boron penetration for p+ stacked poly-Sigates by using inductively coupled N2 plasma treatment

Nitridation of stacked poly-Si gates by inductively coupled N₂ plasma (ICNP) treatment has been shown to suppress boron penetration and improve gate oxide integrity. The ICNP treatments on the stacked poly-Si layers create nitrogen-rich layers not only between the stacked poly-Si layers but also in the gate oxide after post implant anneal, thus resulting in effective retardation of boron diffusion. In addition, positioning of ICNP treatment closer to gate oxides leads to higher nitrogen peaks in the gate oxide region, resulting in further suppression of boron penetration and improvement of gate oxide reliability     

Theoretical studies of CO hydrogenation to methanol over Cu, Pd, and Pt metals

Theoretical studies of CO hydrogenation to methanol over Cu, Pd, and Pt metals have been carried out using a quasi‐relativistic density‐functional method. The metal surface is simulated by a M₁₀ cluster model. Reaction energies for the elementary steps involved are determined. The activation energies are estimated by the analytic BOC‐MP formula. The results support that these metals are active in CO hydrogenation to methanol. The rate‐determining steps are shown to be different for the metals. The highest activation energies of reaction on the metals fall in the order Cu < Pd < Pt, which corresponds to the order of the catalytic activities of the metals in CO hydrogenation. This revised version was published online in July 2006 with corrections to the Cover Date.     

Analyses of distortions and cross modulations in erbium-doped fiberamplifiers

The closed-form expressions of nonlinear Fourier transfer functions are presented for the analyzes of distortions and cross modulations in erbium-doped fiber amplifier (EDFA) systems. Based upon Volterra series and the time-dependent perturbation theory, the transfer functions are obtained after taking account of both the EDFA nonlinearity and chirping effect. Their applications to an AM-SCM and an eight-channel wavelength-division-multiplexed systems are demonstrated     

Microwave-assisted hydrothermal synthesis of coralloid nanostructured nickel hydroxide hydrate and thermal conversion to nickel oxide

Coralloid nanostructured nickel hydroxide hydrate has been successfully synthesized by a simple microwave-assisted hydrothermal process using nickel sulfate hexahydrate as precursor and urea as hydrolysis-controlling agent. A pure coralloid nanostructured nickel oxide can be obtained from the nickel hydroxide hydrate after calcination at 400 °C. The thermal property, structure and morphology of samples were characterized by thermogravimetry (TG), temperature-programmed reduction (TPR), X-ray (XRD), infrared spectroscopy (IR), scanning electron microscopy (SEM) and transmission electron microscopy (TEM).     

Numerical Analysis of Laterally Loaded 3 × 3 to 7 × 3 Pile Groups in Sands

The coupled bridge foundation-superstructure finite-element code FLPIER was employed to predict the lateral response of the single piles and 3 × 3 to 7 × 3 pile groups founded in both loose and medium dense sands. The p-multiplier factors suggested by McVay et al. for laterally loaded pile groups with multiple pile rows were implemented for the predictions. The soil parameters were obtained through a back-analysis procedure based on single pile test results. The latter, as well as the numerical predictions of both the single and group tests, are presented. It was found that the numerical code FLPIER did an excellent job of predicting the response of both the single piles and the 3 × 3 to 7 × 3 pile groups. The latter involved the predictions of lateral load versus lateral deflection of the group, the shears and bending moments developed in the individual piles, and the distributions of the lateral loads in each pile row, which were all in good agreement with the measured results.     

Application of preblasting to high-section top coal caving for steep-thick coal seam

For mining extra-steep-thick coal seam, the sublevel top coal caving is a high efficient method in practical engineering. However, major challenges associated with mining high-section top-coal-caving (HSTCC) are related to the resulting high ground stresses. Inevitability, using the high-section sublevel top coal caving for extra-steep-thick coal seam, the large scale of mined-out area appears. If the prefracture blasting and hydraulic fracture techniques are utilized, the top coal damage and cracks will develop, and the mining complexity will increase, such as seam inclination, continuity, mechanical characteristics of roof and susceptibility of top coal, etc. First, the field conditions of B₁₊₂ seam were investigated at the +588 level of the Weihuliang Underground Mine of China. Subsequently, according to caving mechanism of strata response obtained from several special models including physical simulation tests and numerical simulation models, the prefracture process including blasting and injecting water were analyzed. Then, the prefracture blasting technique was successfully applied to the caving of 52 m-sublevel seam. Finally, the effects were verified by advanced detecting instruments, and the results show these methods and measurements are feasible and valid.     

Very low noise RF nMOSFETs on plastic by substrate thinning and wafer transfer

A very low minimum noise figure (NF/sub min/) of 1.2 dB and a high associated gain of 12.8 dB at 10 GHz were measured for six-finger, 0.18-/spl mu/m radio frequency (RF) metal-oxide semiconductor field-effect transistors mounted on insulating plastic following substrate-thinning (/spl sim/30 /spl mu/m) and wafer transfer. Before this process, the devices had a slightly better RF performance of 1.1-dB NF/sub min/ and a 13.7-dB associated gain. The small RF performance degradation of the active transistors transferred to plastic shows the potential of integrating electronics onto plastic.