Protection of normal cells from irradiation bystander effects by silica-flufenamic acid nanoparticles

The development of a myriad of nanoparticles types has opened new possibilities for the diagnostics and treatment of many diseases, especially for cancer. However, most of the researches done so far do not focus on the protection of normal cells surrounding a tumor from irradiation bystander effects that might lead to cancer recurrence. Gap-junctions are known to be involved in this process, which leads to genomic instability of neighboring normal cells, and flufenamic acid (FFA) is included in a new group of gap-junction blockers recently discovered. The present work explores the use of mesoporous silica nanoparticles MCM-41 functionalized with 3-Aminopropyltriethoxysilane (APTES) for anchoring the flufenamic acid for its prolonged and controlled release and protection from radiation bystander effects. MCM-41 and functionalized samples were structurally and chemically characterized with multiple techniques. The biocompatibility of all samples was tested in a live/dead assay performed in cultured MRC-5 and HeLa cells. HeLa cells cultured were exposed to 50?Gy of gamma-rays and the media transferred to fibroblast cells cultured separately. Our results show that MCM-41 and functionalized samples have high biocompatibility with MCR-5 and HeLa cells, and most importantly, the FFA delivered by these NPs was able to halt apoptosis, one of main bystander effects.     

Delay discounting of real and hypothetical rewards.

The degree to which real and hypothetical rewards were discounted across delays ranging from 6 hr to 1 year was explored in a within-subjects design. An adjusting-amounts procedure was used to estimate the subjective value of real and hypothetical rewards at each delay. A hyperbolic discounting function provided a significantly better fit to individual participants' preferences than did an exponential function. No significant effect of reward type on degree of hyperbolic discounting or area under the discounting curves was detected. These findings offer some support for the validity of using hypothetical rewards to estimate discounting rates in substance-abusing and other populations, but caution is suggested because this support is gleaned from a failure to detect an effect of reward type. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Comparing the effectiveness of process-experiential with cognitive-behavioral psychotherapy in the treatment of depression.

This study compared process-experiential and cognitive-behavioral psychotherapy in the treatment of major depression in a researcher allegiance-balanced randomized clinical trial. Sixty-six clients participated in weekly sessions of psychotherapy for 16 weeks. Clients' level of depression, self-esteem, general symptom distress, and dysfunctional attitudes significantly improved in both therapy groups. Clients in both groups showed significantly lower levels of reactive and suppressive coping strategies and higher reflective coping at the end of treatment. Although outcomes were generally equivalent for the 2 treatments, there was a significantly greater decrease in clients' self-reports of their interpersonal problems in process-experiential than cognitive-behavioral therapy. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Predicting forage indigestible NDF from lignin concentration

We used chemical composition and in vitro digestibility data from temperate and tropical forages to develop relationships between indices of lignification and forage indigestible NDF. Neutral detergent fiber indigestibility increased nonlinearly as the lignin concentration of the NDF increased. Differences in estimated indigestible NDF using equations developed for a specific forage class (C3 and C4 grasses and legumes) were small and are probably not biologically significant when compared to those estimated from a common equation. Selected equations were compared with the Cornell Net Carbohydrate and Protein System (CNCPS) for the prediction of ADG. The linear equation (2.4 times NDF lignin content) used by the CNCPS and the Beef NRC had some of the largest errors due to mean bias. A log-log model [4.37 x (lignin/NDF)(.84)] provided the best combination of low total prediction error, low mean bias, and minimal error due to regression bias when permanganate lignin was used. A similar equation based on sulfuric acid lignin [6.17 x (lignin/NDF)(.77)] also met the above criteria. These equations then were evaluated with the CNCPS model against animal growth data from diets ranging in forage quality. Regardless of the equation used for predicting unavailable fiber, the CNCPS underpredicted daily gain, with mean biases ranging from -.10 to -.22 kg/d. Regression bias ranged from .13 to .14 kg/d and the coefficients differed from unity (P = .0001). The new equations gave numerically lower energy allowable ADG by steers compared to the linear equation currently used by the CNCPS model. The estimates were lower due to a higher predicted indigestible NDF, which resulted in a lower estimated forage energy value.     

Photocatalytic oxidation on nanostructured chalcogenide modified titanium dioxide

Surface mesoscopic titanium dioxide (P25) films deposited onto conducting glass plates (SnO₂:F) were modified by colloidal Ru_xSe_y nanoparticles (2 nm diameter). A decrease of the photocurrent was found upon modification of TiO₂ films. However, interfacial electron transfer kinetics to oxygen was favored. The increase of the catalyst surface concentration onto TiO₂, shifts the onset of the photocurrent under UV-illumination, to 0.6 V/RHE in presence of oxygen dissolved in the electrolyte. Concomitant to this, the cathodic current becomes important and shifts to more positive potentials. This phenomenon allows the system to work catalytically under open circuit conditions. On non-modified TiO₂, the application of a 0.3 V/RHE potential leads to an enhancement of the photooxidation of formic acid. Photocurrent images revealed a non-homogeneous distribution of the catalyst on the titanium dioxide films.     

高速加工中心7:24主轴/刀柄联接的可行性分析

在高速数控机床加工中,由于高速旋转中的离心力作用,传统7:24主轴/刀柄联接的径向位移与两者间的间隙随转速的提高呈平方关系增长。径向间隙的存在导致定位精度和重复定位精度不高、轴向和径向刚度低等问题,严重影响加工精度和质量。论文采用有限元分析方法,验证了主轴转速为15000r/min时,加工中心采用7:24主轴/刀柄联接的可行性。并提出改进7:24主轴/刀柄联接性能的方法。     

Extracellular Vesicles from Mesenchymal Stromal Cells for the Treatment of Inflammation-Related Conditions

Over the past two decades, mesenchymal stromal cells (MSCs) have demonstrated great potential in the treatment of inflammation-related conditions. Numerous early stage clinical trials have suggested that this treatment strategy has potential to lead to significant improvements in clinical outcomes. While promising, there remain substantial regulatory hurdles, safety concerns, and logistical issues that need to be addressed before cell-based treatments can have widespread clinical impact. These drawbacks, along with research aimed at elucidating the mechanisms by which MSCs exert their therapeutic effects, have inspired the development of extracellular vesicles (EVs) as anti-inflammatory therapeutic agents. The use of MSC-derived EVs for treating inflammation-related conditions has shown therapeutic potential in both in vitro and small animal studies. This review will explore the current research landscape pertaining to the use of MSC-derived EVs as anti-inflammatory and pro-regenerative agents in a range of inflammation-related conditions: osteoarthritis, rheumatoid arthritis, Alzheimer’s disease, cardiovascular disease, and preeclampsia. Along with this, the mechanisms by which MSC-derived EVs exert their beneficial effects on the damaged or degenerative tissues will be reviewed, giving insight into their therapeutic potential. Challenges and future perspectives on the use of MSC-derived EVs for the treatment of inflammation-related conditions will be discussed.     

Relationship between surface μ‐roughness and interface slurry particle spatial distribution during glass polishing

During optical glass polishing, a number of interactions between the workpiece (i.e., glass), polishing slurry, and pad can influence the resulting workpiece roughness at different spatial scale lengths. In our previous studies, the particle size distribution of the slurry, the pad topography, and the amount of material removed by a single particle on the workpiece were shown to strongly correlate with roughness at AFM scale lengths (nm‐μm) and weakly at μ‐roughness scale lengths (μm‐mm). In this study, the polishing slurry pH and the generation of glass removal products are shown to influence the slurry particle spatial and height distribution at the polishing interface and the resulting μ‐roughness of the glass workpiece. A series of fused silica and phosphate glass samples were polished with various ceria and colloidal silica slurries over a range of slurry pH, and the resulting AFM roughness and μ‐roughness were measured. The AFM roughness was largely invariant with pH, suggesting that the removal function of a single particle is unchanged with pH. However, the μ‐roughness changed significantly, increasing linearly with pH for phosphate glass and having a maximum at an intermediate pH for fused silica. In addition, the spatial and height distribution of slurry particles on the pad (as measured by laser confocal microscopy) was determined to be distinctly different at low and high pH during phosphate glass polishing. Also, the zeta potential as a function of pH was measured for the workpiece, slurry, and pad with and without surrogate glass products (K₃PO₄ for phosphate glass and Si(OH)₄ for silica) to assess the role of interfacial charge during polishing. The addition of K₃PO₄ significantly raised the zeta potential, whereas addition of Si(OH)₄ had little effect on the zeta potential. An electrostatic DLVO three‐body force model, using the measured zeta potentials, was used to calculate the particle–particle, particle–workpiece, and particle–pad attractive and repulsive forces as a function of pH and the incorporation of glass products at the interface. The model predicted an increase in particle–pad attraction with an increase in pH and phosphate glass products consistent with the measured slurry distribution on the pads during phosphate glass polishing. Finally, a slurry “island” distribution gap (IDG) model has been formulated which utilizes the measured interface slurry distributions and a load balance to determine the interface gap, the contact area fraction, and the load on each slurry “island”. The IDG model was then used to simulate the workpiece surface topography and μ‐roughness; the results show an increase in roughness with pH similar to that observed experimentally.     

D-Cycloserine and the Facilitation of Extinction of Conditioned Fear: Consequences for Reinstatement.

Several recent studies have reported that D-cycloserine (DCS), a partial N-methyl-D-aspartate agonist, facilitates extinction of learned fear in rats. Other studies have shown that representation of the unconditioned stimulus (US) can reinstate learned fear after extinction. This study examined whether this reinstatement effect occurs in Sprague-Dawley rats given DCS at the time of extinction. Results showed that saline-treated rats exhibited the reinstatement effect but DCS-treated rats did not (Experiments 1 and 2). This lack of reinstatement in DCS-treated rats was not due to residual effects of DCS on either US or context processing (Experiment 3). Overall, these results (a) raise questions about the mechanisms underlying DCS facilitation of extinction and (b) suggest that DCS might have substantial practical benefit. (PsycINFO Database Record (c) 2010 APA, all rights reserved)