An Introduction to Adaptive QAM Modulation Schemes for Known and Predicted Channels

A major disadvantage with fixed modulation (nonadaptive) on channels with varying signal-to-noise ratio (SNR) is that the bit-error-rate (BER) probability performance is changing with the channel quality. Most applications require a certain maximum BER and there is normally no reason for providing a smaller BER than required. An adaptive modulation scheme, on the contrary, can be designed to have a BER which is constant for all channel SNRs. The spectral efficiency of the fixed modulation is constant, while it, in general, will increase with increasing channel SNRs for the adaptive scheme. This in effect means that the average spectral efficiency of the adaptive scheme is improved, while at the same time the BER is better suited to the requirement of the application. Thus, the adaptive link becomes much more efficient for data transmission. The major disadvantage is that the transmitter needs to know the channel SNR such that the best suitable modulation is chosen and the receiver must be informed on the used modulation in order to decode the information. This leads to an increased overhead in the system as compared with a fixed modulation system. In this paper, we introduce adaptive modulation systems by presenting some of the simpler adaptive quadrature amplitude modulation schemes and their performance for both perfectly known and predicted channels.     

REACTIVE TUNING OF TARGET ESTIMATE ACCURACY IN MULTISENSOR DATA FUSION

Dealing with conflicting and target-specific requirements is an important issue in multisensor and multitarget tracking. This paper aims to allocate sensing resources among various targets in reaction to individual information requests. The proposed approach is to introduce agents for every relevant target responsible for its tracking. Such agents are expected to bargain with each other for a division of resources. A bilateral negotiation model is established for resource allocation in two-target tracking. The applications of agent negotiation to target covariance tuning are illustrated together with simulation results presented. Moreover, we suggest a way of organizing simultaneous one-to-one negotiations, making our negotiation model still applicable in scenarios of tracking more than two targets.     

Structural, optical and electrical properties of reactively sputtered Ag2Cu2O3 films

Ag₂Cu₂O₃ thin films were deposited on glass substrates by RF magnetron sputtering of an equiatomic silver-copper target (Ag_0.5Cu_0.5) in reactive Ar-O₂ mixtures. The reactive sputtering was done at varying power, oxygen flow rate and deposition temperature to study the influence of these parameters on the deposition of Ag₂Cu₂O₃ films. The film structure was determined by X-ray diffraction, while the optical properties were examined by spectrophotometry (UV-vis-NIR) and photoluminescence. Furthermore, the film thickness and resistivity were measured by tactile profilometry and 4-point probe, respectively. Additional mobility, resistivity and charge carrier density Hall effect measurements were done on a few selected samples. The best films in terms of stoichiometry and crystallography were achieved with a sputtering power of 100 W, oxygen and argon flow rates of 20 sccm (giving a deposition pressure of 1.21 Pa) and a deposition temperature of 250 °C. The optical transmittance and photoluminescence spectra of films deposited with these parameters indicate several band gaps, most prominently, a direct one of around 2.2 eV. Electrical characterization reveals charge carrier concentrations and mobilities in the range of 10²¹-10²² cm^− 3 and 0.01-0.1 cm²/Vs, respectively.     

Effects of housing, management, and health of dairy heifers on first-lactation udder health in southwest Sweden

Data on health, management, and housing from birth to first calving were collected for 2,126 heifers on semi-monthly visits made by project veterinarians to 107 dairy herds from southwest Sweden. Additional data were obtained from the official milk- and health-recording program. Factors associated with incidence of veterinarian-treated clinical mastitis (VTCM) in the period 7 d before (d −7) to 30 d after first calving and of elevated cow composite somatic cell count (SCC, ≥200,000 cells/mL) at first test milking after first calving, respectively, were investigated using a 2-level (animal and herd) logistic regression analysis after initial screening by univariate analyses. The incidence risk of VTCM during the complete first lactation (305 d) was 10.8%. Ten percent of the diseased animals had more than 1 case of VTCM and 51% of total cases occurred from −7 to 30 d postcalving. The incidence rate of VTCM during the complete first 305-d lactation was 1.13 cases per 100 cow-mo. In total, 18.1% of the animals had elevated SCC at first test milking (mean 21 d) after calving. Veterinarian-treated clinical mastitis at −7 to 30 d postcalving was associated with higher overall incidence of mastitis in the herd and with reproductive disorders (i.e., retained placenta, endometritis, pyometra, dystocia, or twin birth). The risk of elevated SCC increased with increasing percentage of cows in the herd that, some time during the year, had had an increased udder disease score (chronically increased SCC). Other factors associated with increased risk of elevated SCC were increasing amounts of concentrates fed to 11- to 16-mo-old heifers, moving to confined housing the day of calving instead of earlier, and use of restraint measures at milking. In addition, growth rate from birth to weaning, and several feed-related variables (e.g., amount of concentrates and type of roughage given) were associated with VTCM at −7 to 30 d post-calving or elevated SCC at first test milking in the univariate analyses.     

FINITE ELEMENT MODELING AND SIMULATION OF WELDING. PART 3: EFFICIENCY AND INTEGRATION

Welding simulation has advanced from the analysis of laboratory setups to real engineering applications during the last three decades. This development is outlined and the directions for future research are summarized in this review, which consists of three parts. This parts focuses on computational strategies and how they are integrated with other methods to facilitate the use of simulations in engineering. These developments have lead to the increased application of welding simulations in industry.     

Evaluation of the oxidation and Cr evaporation properties of selected FeCr alloys used as SOFC interconnects

In recent years, a number of ferritic interconnect materials for use in solid oxide fuel cells (SOFC) have been developed and are now commercially available. Although similar, there are substantial variations in minor alloying elements. This study compares the oxidation performance of five such interconnect materials: Crofer 22 H, Crofer 22 APU (ThyssenKrupp VDM), Sanergy HT (Sandvik Materials Technology), ZMG232 G10 (Hitachi Metals) and E-Brite (ATI Allegheny Ludlum).     

The effect of oxygen and volatile combustibles on the sulphation of gaseous KCl

Sulphur/sulphate containing additives, such as elemental sulphur (S) and ammonium sulphate (NH₄)₂SO₄), can be used for sulphation of KCl during biomass combustion. These additives convert KCl to an alkali sulphate and a more efficient sulphation is normally achieved for ammonium sulphate compared to sulphur. The presence of SO₃ is thus of greater importance than that of SO₂. Oxygen and volatile combustibles could also have an effect on the sulphation of gaseous KCl. This paper is based on results obtained during co-combustion of wood chips and straw pellets in a 12 MW circulating fluidised bed (CFB) boiler. Ammonium sulphate was injected at three positions in the boiler i.e. in the upper part of the combustion chamber, in the cyclone inlet, and in the cyclone. The sulphation of KCl was investigated at three air excess ratios (λ = 1.1, 1.2 and 1.4). Several measurement tools were applied including IACM (on-line measurements of gaseous alkali chlorides), deposit probes (chemical composition in deposits collected) and gas analysis. The position for injection of ammonium sulphate had a great impact on the sulphation efficiency for gaseous KCl at the different air excess ratios. There was also an effect of oxygen on the sulphation efficiency when injecting ammonium sulphate in the cyclone. Less gaseous KCl was reduced during air excess ratio λ = 1.1 compared to the higher air excess ratios. The optimal position and conditions for injection of ammonium sulphate were identified by measuring KCl with IACM. A correlation was observed between the sulphation of gaseous KCl and reduced chlorine content in the deposits. The experimental observations were evaluated using a detailed reaction mechanism. It was used to model the effect of volatile combustibles on the sulphation of gaseous KCl by SO₃. The calculations supported the proposition that the presence of combustibles at the position of SO₃ injection (i.e. AS) causes reduction of SO₃ to SO₂.