Inhibitory effect of heavy metals on methane-producing anaerobic granular sludge

Heavy metals could potentially have a negative impact on methane-producing anaerobic granular sludge. The objective of this study was to investigate the inhibitory effect of zinc(II), chromium(VI), nickel(II), and cadmium(II) on the methane-producing activity of granular sludge sampled from the upflow anaerobic sludge blanket reactor that treats the wastewaters of a yeast factory, for a range of concentrations between 0 and 128 mg L(-1). The modified Gompertz, Logistic, and Richards equations were applied to describe the inactivation of anaerobic culture by heavy metals. According to these models, the values of methane production potential (mL) for a heavy metal concentration of 128 mg L(-1) were in the following order: Ni (44.82+/-0.67)>Cd (28.73+/-0.11)>Cr (15.52+/-1.63)>Zn (0.65+/-0.00). The IC(50) values, the metal concentrations that cause a 50% reduction in the cumulative methane production over a fixed period of exposure time (24h), for the individual heavy metals were found to be in the following order: Zn (most toxic; 7.5 mg L(-1))>Cr (27 mg L(-1))>Ni (35 mg L(-1)) approximately Cd (least toxic; 36 mg L(-1)).     

Effect of packing on void morphology in resin transfer molded E‐glass/epoxy composites

Effects of applying a packing pressure on void content, void morphology, and void spatial distribution were investigated for resin transfer molding (RTM) E‐glass/epoxy composites. Packing pressures of zero and 570 kPa were respectively applied to center‐gated composites containing 17.5% randomly oriented, E‐glass fiber preform. Radial samples of these disk‐shaped composites were utilized to evaluate voidage via microscopic image analysis. Two adjacent surfaces were cut from each molded disk in order to evaluate void presence from both through‐the‐thickness and planar views. The packed composite was found to contain almost 92% less void content than the unpacked composite. While void fractions of 2.2 and 2.6% were measured, respectively, from the through‐the‐thickness and planar surfaces of the unpacked composite, only 0.2% void content was observed in the packed composite from both surfaces. Digital images obtained from through‐the‐thickness surface showed that average void size dropped from 59.3 μm in the unpacked composite to 31.7 μm in the packed composite. A similar reduction in average void size from 66.7 to 41.1 μm was observed from the planar surfaces. Circular voids were found to experience higher removal rates at 99%, followed by cylindrical and elliptical voids at 83 and 81%, respectively; while irregular voids show slightly lower void removal rates at 67%. Void proximity to fiber bundles was also observed to affect void reduction as voids located inside fiber tows experience lower void reduction rates. Along the radial direction of the molded disks, removal of voids with different proximities to fibers seems to depend on their arrangement at the end of the filling stage. These findings are believed to ascertain packing as an effective void removal method for RTM and similar liquid composite molding processes. POLYM. COMPOS., 26:614–627, 2005. © 2005 Society of Plastics Engineers     

Social dominance mediates the association of testosterone and neurobehavioral disinhibition with risk for substance use disorder.

This investigation determined the influence of testosterone and neurobehavioral disinhibition (ND) on risk for substance use disorder (SUD). Testosterone level during puberty was hypothesized to promote social dominance associated with norm-violating behavior that, in turn, predisposes individuals to use of illicit drugs and, subsequently, SUD. Using a prospective paradigm, the authors recruited 179 boys (mean age=11.62 years, SD=0.88) and followed up when participants were ages 12-14, 16, 19, and 22. Results indicated that social dominance/norm-violating behavior (SD/NVB) at age 16 mediated the association between testosterone level (ages 12-14) and SUD (age 22). In addition, SD/NVB mediated the association between ND and SUD. These findings suggest that development of SUD is influenced by androgen-dependent and neurobehavioral processes via a social motivational style characterized by SD/NVB. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Soft Matter in a Tight Spot: Nanorheology of Confined Liquids and Block Copolymers

The linear frequency-dependent shear rheology and force–distance profiles of molecularly-thin fluids of very different structure were contrasted: a globular molecule octamethylcyclotetrasiloxane (OMCTS), branched alkanes (3-methylundecane and squalane), and a polymer brush in near-theta solution (polystyrene-polyvinylpyridine). In each case the data suggest a prolongation of the longest relaxation time (τ₁) with increasing compression. At frequencies ω > 1/τ₁ the shear response was “solid-like”, but at ω < 1/τ₁ it was “liquid-like”. OMCTS under mild compression exhibited seeming power-law viscoelastic behavior with G′(ω) = G″(ω) over a wide frequency range. Of the branched-molecule fluids, 3-methylundecane exhibited oscillatory force–distance profiles; this confirms prior computer simulations. But squalane (6 pendant methyl groups in an alkane chain 24 carbons long) showed one sole broad attractive minimum. Polymer brushes in a near-theta solvent exhibited changes qualitatively similar to those OMCTS, in particular, a smooth progression of longest relaxation time, generating a transition from “liquid-like” to “solid-like” shear rheology with decreasing film thickness. The common trend of shear response in these systems, in spite of important differences in molecular structure and force–distance profiles, is emphasized.     

Friction compensation and evaluation for a force control application

The presence of non-linear friction poses a significant problem for controller design in many motion control applications. Since most currently available compensation schemes for non-linear friction require a well-established friction model, the controller design problem becomes more difficult in applications where the frictional forces cannot be modeled accurately. In this paper, friction compensation is considered for an actuator used in a force control application involving very low motion amplitudes. The non-linear frictional effects are particularly significant and are, furthermore, difficult to model accurately. An existing control scheme, originally proposed for sensitivity reduction in systems with plant model uncertainty, is used here for friction compensation. Experimental and simulation results are used to demonstrate the effectiveness of the friction compensation that is achieved using this method, as compared to other methods of friction compensation. Furthermore, the effectiveness of such compensation is quantitatively analysed using two methods: an analysis based on the describing function approach, and a performance robustness analysis based on structured singular values.     

Design criteria for functional data bases

A functional data base is characterized as a collection of functions and its language as a collection of operators. The data base design criteria are established in terms of the functional properties, “redundancy” and “semantic content”. The behavior of data base operators is analyzed under these criteria to detect redundancies and compute the semantic content of a data model, to evaluate and compare data models. The correspondence between these criteria and the relational normalization theory is established.     

Information markets over trust networks

Information markets are inefficient. Information products have large upfront development costs, yet their duplication costs are negligibly small; and they are experience goods with high costs of marketing and promotion. As a result, either winner-take-all markets are created through large and expensive promotional campaigns, or artificial monopoly power is conferred by the government through copyright protection, or both, to prevent the collapse of these markets from intense price competition and piracy. Such inefficiency creates opportunities to design more efficient markets by utilizing new technologies. Trust networks provide such an opportunity where the network infrastructure acts not only as a distribution system for information products, but also as an advertising and promotion medium, a payment and pricing mechanism, a guarantee and insurance service, and a copyright enforcement and dispute resolution tool. Such a network-centric market place is proposed to remedy many of the shortcomings of mass markets by relying on peer-to-peer distribution, peer-to-peer payments, and peer-to-peer enforcement of trust and integrity. Analytical models are presented to show that such a market place for information goods can scale up to satisfy large markets without expensive promotions and advertising campaigns, create customized products with dynamic pricing, reduce entry costs by eliminating the distinction between buyers and sellers, and eliminate the need for copyright protection.     

Removal of hexavalent chromium anions via polymer enhanced ultrafiltration using a fully ionized polyelectrolyte

A fully ionized polyelectrolyte was synthesized for Cr(VI) removal from aqueous solutions by continuous polymer enhanced ultrafiltration (PEUF). Effect of operating parameters such as pH, loading, polymer, and competing ion concentrations were examined. Highest Cr(VI) retention was obtained at a loading of 0.01 at pH 4. Increasing both polymer and chromate concentrations at a fixed loading of 0.01 decreased the retention which demonstrated the effect of crowding. In the presence of competing anions such as chloride and sulfate, Cr(VI) retention decreased for all of the pH values studied. Even at high competing anion concentrations, significant retentions of Cr (VI) were obtained.