The Effect of the Ionizing Radiation on Hydroxyapatite–Polydimethylsiloxane Layers

The bio hydroxyapatite (HAp) was used from a long time in different medical and environmental applications. The HAp layers with a uniform surface were used for various medical applications such as orthopedic and dental metal implants. In this work, we reported on the influence of X‐ray radiation on the structural and morphological properties of composite layers based on HAp and polydimethylsiloxane (PDMS) deposited on titanium substrates. The HAp:PDMS layers were investigated by different complementary methods such as scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and glow discharge optical emission spectrometry (GDOES). FTIR spectral analysis showed that the molecular structure of the coatings was not changed after their irradiation even though, the depth profile analysis performed by GDOES indicated a depletion of Ca and P elements from the HAp:PDMS irradiated samples. By SEM, we showed that the morphological features of the coatings were also changed, as the irradiated layers are delaminated. The biological assays confirmed that the antibacterial activity of HAp:PDMS composite layers increased after irradiation. The results obtained in this study highlighted that the biological properties of HAp:PDMS layers could be influenced by irradiation. POLYM. ENG. SCI., 59:2406–2412, 2019. © 2019 Society of Plastics Engineers     

Synthesis, Crystal Structure, Spectroscopic and Thermal Investigations of a Novel 2D Sodium(I) Coordination Polymer Based on 2-Aminoterephthalic Ligand

The reaction of sodium hydroxide with 2-aminoterephthalic acid leads to the formation of a complex of the general formula: [Na₂(atpt)(H₂O)₅]·H₂O, where atpt?=?[NH₂C₆H₃(COO)₂]^2?. Sodium 2-aminoterephthalate was synthesized and characterized by single-crystal X-ray diffraction, FT-IR spectroscopy, thermal analysis and coupled TG–FT-IR technique. Crystallographic study of the sodium complex reveals that the compound crystallizes in the triclinic system, the space group P-1 with a?=?7.983(3) ?, b?=?8.405(3) ?, c?=?11.311(5) ?, α?=?70.74(3)°, β?=?76.57(3)°, γ?=?83.12(3)° and V?=?696.1(5) ?³. On heating in air atmosphere the compound in question loses all water molecules in two steps in the temperature range 30–205?°C. The anhydrous form of the complex is stable up to 370?°C and then decomposes to sodium carbonate.     

Relation between the adsorbed quantity and the immersion enthalpy in catechol aqueous solutions on activated carbons

An activated carbon, Carbochem(TM)-PS230, was modified by chemical and thermal treatment in flow of H(2), in order to evaluate the influence of the activated carbon chemical characteristics in the adsorption of the catechol. The catechol adsorption in aqueous solution was studied along with the effect of the pH solution in the adsorption process of modified activated carbons and the variation of immersion enthalpy of activated carbons in the aqueous solutions of catechol. The interaction solid-solution is characterized by adsorption isotherms analysis, at 298 K and pH 7, 9 and 11 in order to evaluate the adsorption value above and below that of the catechol pK(a). The adsorption capacity of carbons increases when the solution pH decreases. The retained amount increases slightly in the reduced carbon to maximum adsorption pH and diminishes in the oxidized carbon. Similar conclusions are obtained from the immersion enthalpies, whose values increase with the solute quantity retained. In granular activated carbon (CAG), the immersion enthalpies obtained are between 21.5 and 45.7 J·g(-1) for catechol aqueous solutions in a range of 20 at 1500 mg·L(-1).     

Incorporation of polyfluorenes into poly(lactic acid) films for sensor and optoelectronics applications

Films of neat and plasticized biodegradable poly(lactic acid) (PLA) matrices containing anionic conjugated polyelectrolytes, poly[9,9‐bis(4‐phenoxybutylsulfonate)]fluorene‐2,7‐diyl‐alt‐arylenes, with 1,4‐phenylene and 4,4″‐p‐terphenylene, respectively, as arylene groups or a neutral poly(9,9‐dialkylfluorene) for comparison were prepared by solution casting. These films were characterized using differential scanning calorimetry, thermogravimetry, scanning electron microscopy and fluorescence spectroscopy. In addition, the effects of plasticizer on the thermal properties and the oxygen permeability of the PLA films were measured through the oxygen transmission rate. Results show that it is possible to obtain thin, optically transparent and luminescent films with potential in oxygen sensing, exhibiting good thermal and photochemical stability. At high polyelectrolyte content, evidence is found for phase separation and aggregate formation and it is no longer possible to obtain completely homogeneous films. The possibility of incorporating the cationic metal complex tris(2,2′‐bipyridyl)ruthenium(II) into plasticized PLA films containing conjugated polyelectrolytes for dual‐wavelength ratiometric luminescence sensing is also discussed. Copyright © 2012 Society of Chemical Industry     

Preparation and magnetoelectric properties of NiFe2O4–PZT composites obtained in-situ by gel-combustion method

Magnetoelectric composites of xNiFe₂O₄–(1 ? x)Pb(Zr,Ti)O₃ with x = 2, 5, 10, 20, 30% were prepared by citrate–nitrate combustion using PZT-based template powders. In order to ensure a better connectivity of dissimilar phases, we have used chemical methods for preparation in situ composites, followed by adequate sintering procedure. The structural, microstructural and functional properties of di-phase magnetoelectric composites of NiFe₂O₄–PZT are reported. The XRD analysis is demonstrating the synthesis of pure ferrite phase directly on the ferroelectric templates. An excellent mixing was obtained in the composite powders, as proved by a detailed SEM analysis.The magnetic and dielectric behaviors of the ceramic composites vary with the ratio of the two phases. The dielectric behavior is greatly influenced by the magnetic phase. The magnetoelectric (ME) coefficient was measured as a function of applied DC magnetic field. The maximum ME coefficient (dE/dH) varies from 0.0011 mV/(cm Oe) to 0.5 mV/(cm Oe) with increasing of NF addition.     

CO(2) Adsorption on Activated Carbon Honeycomb-Monoliths: A Comparison of Langmuir and Tóth Models

Activated carbon honeycomb-monoliths with different textural properties were prepared by chemical activation of African palm shells with H(3)PO(4), ZnCl(2) and CaCl(2) aqueous solutions of various concentrations. The adsorbents obtained were characterized by N(2) adsorption at 77 K, and their carbon dioxide adsorption capacities were measured at 273 K and 1 Bar in volumetric adsorption equipment. The experimental adsorption isotherms were fitted to Langmuir and Tóth models, and a better fit was observed to Tóth equation with a correlation coefficient of 0.999. The maximum experimental values for adsorption capacity at the highest pressure (2.627-5.756 mmol·g(-1)) are between the calculated data in the two models.     

Pomegranate fallen leaves as a source of natural dye for mordant-free dyeing of wool

The application of metal mordants is usually necessary in dyeing of wool with natural dyes to improve the dye exhaustion and fastness properties. The majority of metal salts generally used as mordants are considered as toxic and it is important to find replacements for them. Plant sources with high content of tannins are good candidates as bio-mordant or colourant to overcome this drawback. In this study, the waste fallen leaves of pomegranate tree were used as a source of natural dye for the eco-friendly dyeing of wool fabric without the use of metal mordants. The dyeing process variables including dye concentration, dyebath pH, and temperature were optimised using response surface methodology to obtain the highest colour strength. The colour strength was increased by increasing the natural dye powder up to 100%owf while the optimum pH and dyebath temperature were 4 and 100°C, respectively. The sample dyed under the optimal condition exhibited good fastness properties against washing and light. This study approved the potential of Punica granatum fallen leaves for the dyeing of wool without any mordant, while high fastness properties were obtained.     

Serendipitous Identification of a Covalent Activator of Liver Pyruvate Kinase

Enzymes are effective biological catalysts that accelerate almost all metabolic reactions in living organisms. Synthetic modulators of enzymes are useful tools for the study of enzymatic reactions and can provide starting points for the design of new drugs. Here, we report on the discovery of a class of biologically active compounds that covalently modifies lysine residues in human liver pyruvate kinase (PKL), leading to allosteric activation of the enzyme (EC₅₀=0.29 μM). Surprisingly, the allosteric activation control point resides on the lysine residue K282 present in the catalytic site of PKL. These findings were confirmed by structural data, MS/MS experiments, and molecular modelling studies. Altogether, our study provides a molecular basis for the activation mechanism and establishes a framework for further development of human liver pyruvate kinase covalent activators.     

Dodecatungstocobaltate supported over ZSM-5 zeolite as novel solid catalyst in selective sulfide oxidation

The catalytic behavior of a Keggin type potassium dodecatungstocobaltate (II) salt supported on ZSM-5 zeolite for wet peroxide oxidation of 2-(methylthio)benzothiazole, as a model organic sulfide, was thoroughly studied. Microporous ZSM-5 zeolite was obtained by the hydrothermal crystallization method. The Keggin salt was incorporated in the MFI zeolite matrix by the wet impregnation method followed by calcination at 350 °C. Catalysts were further characterized by X ray diffraction, UV–Vis diffuse reflectance spectroscopy and scanning electron microscopy-EDAX techniques. Supported and bulk Keggin dodecatungstocobaltate (II) were compared with pure H-ZSM-5 zeolite as catalysts for the sulfide oxidation. When the reaction was not catalyzed, just a 9 mol% of sulfide conversion was obtained. Reaction parameters, such as nature of the solvent, hydrogen peroxide concentration, reaction time, catalyst mass, substrate initial concentration and reaction temperature, were evaluated to reach the optimum reaction conditions, considering substrate conversion and sulfoxide and sulfone selectivities. Catalyst stability in several oxidation cycles was also examined.