Determination of bone mineral volume fraction using impedance analysis and Bruggeman model

Measurements by impedance spectroscopy and Bruggeman effective medium approximation model were employed in order to determine the mineral volume fraction of dry bone. This approach assumes that two or more phases are present into the composite: the matrix (environment) and the other ones are inclusion phases. A fragment of femur diaphysis dense bone from a young pig was investigated in its dehydrated state. Measuring the dielectric properties of bone and its main components (hydroxyapatite and collagen) and using the Bruggeman approach, the mineral volume filling factor was determined. The computed volume fraction of the mineral volume fraction was confirmed by a histogram test analysis based on the SEM microstructures. In spite of its simplicity, the method provides a good approximation for the bone mineral volume fraction. The method which uses impedance spectroscopy and EMA modeling can be further developed by considering the conductive components of the bone tissue as a non-invasive in situ impedance technique for bone composition evaluation and monitoring.     

Photochemical stability of cellulose textile surfaces painted with some reactive azo-triazine dyes

The influence of ultraviolet irradiation of different doses (λ > 300 nm) on the structural and color modifications of cotton fabrics painted with four different azo-triazine dyes (Reactive Yellow 143, Reactive Orange 13, Reactive Red 183, and Reactive Red 2) was studied. High irradiation doses up to 3500 J cm^?2 led to changes in the dyes structures. Structural changes before and after the complete irradiation were compared by applying FTIR, UV–Vis, and near infrared chemical imaging techniques. Color modifications were also investigated. Color differences significantly increased with the irradiation dose for all the studied samples.     

Review of the environmental policy instruments in the standardization of H2 for the decarbonization of Mexico

The objective of this work is to review the environmental and ecological policy instruments that Mexican legislation for existence of an Official Mexican Hydrogen Standard according to the premises motivates decarbonization. There is a worldwide interest in hydrogen (H₂) and its incorporation into legal systems. In Mexico there are large legal gaps that question the legality of H₂, because it is not recognized in a federal law and is only considered in technical standards of voluntary application. Also, Mexico has forest, agricultural, and livestock waste that, if properly used, can cover the energy demand of communities. The main findings of this study refer to the fact that, according to international standards for the management of H₂ and taking into account the regulatory limitations in Mexico, it is possible to promote, an Official Mexican Standard exclusively aimed at establishing the minimum requirements for the design, construction, operation and maintenance of H₂ storage, considering the areas of the opportunity offered by foreign experiences, according to the Mexican context. It is concluded that the parameters of legality exist in the instruments of environmental policy, to support the existence of an Official Mexican Standard of H₂.     

Formation and Height of the Interconnected Fractures Zone after Extraction of Thick Coal Seams with Weak Overburden in Western China

Formation of a zone of interconnected fractures during coal mining is a key factor in mine flooding. Coal mines in western China are characterized by thick coal seams with mechanically weak overburden. In situ studies including drill core analysis, drilling fluid loss measurement, and borehole video monitoring were used at the working face 101 in Shaanxi Jinjitan coal mine to explore the maximum height of the interconnected fractures zone (IFZ). Also, tests on a scaled physical model and numerical simulation based on the drilling data were used to study the formation of the fractured zone. By considering data from other mines with similar mining conditions, a logarithmic relationship was found between the maximum height of the IFZ and the thickness of coal excavation. The maximum height of the IFZ was found to be 27 times the thickness of the excavated coal seam, which is far more than in coal mining areas in eastern China. Also, the IFZ in overlying strata of the study area was arch-shaped, not saddle-shaped, as had been observed in previous studies.     

Hyperbaric storage at and above room temperature of a highly perishable food

Hyperbaric storage at naturally variable room temperature (RT) conditions (18–21 °C) and above (30 °C) was evaluated as a possible new food preservation method, regardless of temperature. Preservation of watermelon juice (used as a case study of a highly perishable food) at RT and 5 °C at atmospheric pressure was compared to preservation under 100 MPa at RT. After 8 h of hyperbaric storage at 100 MPa, the initial microbial loads of the watermelon juice were reduced by 1 log unit for total aerobic mesophiles, and 1–2 log units for Enterobacteriaceae and yeasts and moulds, to levels of about 3 log units for the former and below the detection limit for the latter, and remained thereafter unchanged up to 60 h. Similar results were obtained at 30 °C at 100 MPa after 8 h. At atmospheric pressure at RT (24 h) and 30 °C (8 h), microbial levels were already above quantification limits and unacceptable for consumption. Furthermore, pressure attenuated the increase in titratable acidity verified at atmospheric pressure, but caused higher colour changes, especially a higher lightness and a lower browning degree. Post-hyperbaric storage at 5 °C revealed an extended shelf life, as an additional benefit of hyperbaric storage. These results show that hyperbaric storage is a very promising food preservation methodology.     

Technological Implications of Modifying the Extent of Cell Wall-Proanthocyanidin Interactions Using Enzymes

The transference and reactivity of proanthocyanidins is an important issue that affects the technological processing of some fruits, such as grapes and apples. These processes are affected by proanthocyanidins bound to cell wall polysaccharides, which are present in high concentrations during the processing of the fruits. Therefore, the effective extraction of proanthocyanidins from fruits to their juices or derived products will depend on the ability to manage these associations, and, in this respect, enzymes that degrade these polysaccharides could play an important role. The main objective of this work was to test the role of pure hydrolytic enzymes (polygalacturonase and cellulose) and a commercial enzyme containing these two activities on the extent of proanthocyanidin-cell wall interactions. The results showed that the modification promoted by enzymes reduced the amount of proanthocyanidins adsorbed to cell walls since they contributed to the degradation and release of the cell wall polysaccharides, which diffused into the model solution. Some of these released polysaccharides also presented some reactivity towards the proanthocyanidins present in a model solution.     

Impact of Debaryomyces hansenii strains inoculation on the quality of slow dry-cured fermented sausages

Debaryomyces hansenii strains, M4 and P2, isolated from natural fermented sausages were inoculated in slow fermented sausages to study their effect on processing parameters, microbial population, volatile compound and sensory characteristics. The inoculation of D. hansenii strains, M4 and P2, did not affect the ripening process as no differences in pH and Aw were detected. The dominance of the inoculated yeast strains along the process was followed by RAPDs of M13 minisatellite. The inoculated yeasts, P2 and M4, were recovered at the end of the ripening process although P2 appeared in higher counts than M4. The sausages inoculated with P2 resulted in a decrease in lipid oxidation values (TBARS) and a reduction of lipid-oxidation derived aldehydes in addition to a highest acid compound abundance. M4 inoculated sausages resulted in highest sulphur containing compound abundance. However, no differences in consumer acceptance were detected. Moreover, both yeast strains were responsible for the generation of ethyl methyl-branched ester compounds in the dry-cured sausages.     

Desorption‐ and Decomposition‐Based Techniques for the Regeneration of Activated Carbon

Activated carbon (AC) is an adsorbent used in most adsorption processes related to micro removal of pollutants from the water phase, but the application is limited due to high costs and environmental issues related to the disposal after saturation. Different regeneration techniques, reducing costs and minimizing environmental impact, are reported for the reuse of saturated AC. These techniques can be performed via two separate strands: regeneration based only on desorption of adsorbed compounds in AC, or based on the decomposition of pollutants adsorbed on AC. Literature on the regeneration of saturated ACs is reviewed and promising techniques are highlighted. One of the most challenging bottlenecks preventing the commercial application of regeneration technologies is the difficulty of scaling‐up.     

Dodecatungstocobaltate supported over ZSM-5 zeolite as novel solid catalyst in selective sulfide oxidation

The catalytic behavior of a Keggin type potassium dodecatungstocobaltate (II) salt supported on ZSM-5 zeolite for wet peroxide oxidation of 2-(methylthio)benzothiazole, as a model organic sulfide, was thoroughly studied. Microporous ZSM-5 zeolite was obtained by the hydrothermal crystallization method. The Keggin salt was incorporated in the MFI zeolite matrix by the wet impregnation method followed by calcination at 350 °C. Catalysts were further characterized by X ray diffraction, UV–Vis diffuse reflectance spectroscopy and scanning electron microscopy-EDAX techniques. Supported and bulk Keggin dodecatungstocobaltate (II) were compared with pure H-ZSM-5 zeolite as catalysts for the sulfide oxidation. When the reaction was not catalyzed, just a 9 mol% of sulfide conversion was obtained. Reaction parameters, such as nature of the solvent, hydrogen peroxide concentration, reaction time, catalyst mass, substrate initial concentration and reaction temperature, were evaluated to reach the optimum reaction conditions, considering substrate conversion and sulfoxide and sulfone selectivities. Catalyst stability in several oxidation cycles was also examined.     

Pre-adolescent children exhibit lower aerosol particle volume emissions than adults for breathing,speaking, singing and shouting

Speaking and singing are activities linked to increased aerosol particle emissions from the respiratory system, dependent on the utilized vocal intensity. As a result, these activities have experienced considerable restrictions in enclosed spaces since the onset of the COVID-19 pandemic due to the risk of infection from the SARS-CoV-2 virus, transmitted by virus-carrying aerosols. These constraints have affected public education and extracurricular activities for children as well, from in-person music instruction to children’s choirs. However, existing risk assessments for children have been based on emission measurements of adults. To address this, we measured the particle emission rates of 15 pre-adolescent children, all eight to ten years old, with a laser particle counter for the test conditions: breathing at rest, speaking, singing and shouting. Compared with values taken from 15 adults, emission rates for breathing, speaking and singing were significantly lower for children. Particle emission rates were reduced by a factor of 4.3 across all conditions, whereas emitted particle volume rates were reduced by a factor of 4.8. These data can supplement SARS-CoV-2 risk management scenarios for various school and extracurricular settings.