Effect of zirconia tape porosity on fluorapatite surface film formation by dip coating

Thin fluorapatite (FA) layers on porous 3 mol% yttria-partially stabilized zirconia (Y-PSZ) substrates have been fabricated by dipping porous zirconia tapes into aqueous 27.4 vol% fluorapatite slurries. Two porous Y-PSZ tapes with different volume fraction of porosity were developed using an acrylic latex binder: tapes with 31.4 vol% porosity were prepared using 16.6 vol% starch as fugitive additive and those with 12.7 vol% porosity were fabricated without starch. The influence of the porous structure of the tape surfaces, top and bottom, on the casting rate and consequently on the layer thickness formed on each surface was studied. Layers formed on the top and bottom surfaces of the tapes with 12.7 and 31.4 vol% porosity were compared. The formation of a thin layer on the surface of the tape was governed by both liquid entrainment and slip casting mechanisms. The data for the FA layer formation were in good agreement with the slip casting model for immersion times>0. The casting rate at the top surface of both tapes was greater than that at the bottom surface. This difference was attributed to a greater porosity of the top surface with respect to that of the bottom one and was more pronounced for the tapes prepared with starch. Layers formed on the top surface were found to be about 55 and 32% thicker than those formed on the bottom surface for the tapes fabricated with and without starch, respectively. For the tapes prepared with starch, the greater porosity and number of smaller pores in the matrix of the top surface increased the casting rate and produced the thickest dip coated layers     

Effect of natural and synthetic antioxidants incorporation on the gas permeation properties of poly(lactic acid) films

Gas permeation properties (permeability, diffusivity and solubility coefficients) were determined for carbon dioxide and oxygen in poly(lactic acid) (PLA) films enriched with 0, 2, 4 and 10 wt.% of different antioxidants, at three temperatures, 284, 293 and 303 K, using a time-lag apparatus. Three antioxidants, a natural, α-tocopherol (AT), and two synthetic, butylated hydroxytoluene (BHT) and tert-butylhydroquinone (TBHQ), were tested. DSC results show that the polymer glass transition temperature slightly decreases with the increase of the antioxidant content. The crystallinity degree of PLA films decreases with the addition of BHT and TBHQ, whereas the incorporation of AT increases the crystallinity of PLA films. The permeability towards water vapour, at 299 K and 45% of relative humidity, and surface energy show a decreased in the wettability of the prepared materials with the increase of the antioxidants content. The incapacity to measure gas permeation in PLA films with 10 wt.% of AT and BHT incorporated was due to phase separation, proved by SEM images. The CO₂ and O₂ permeation results show that PLA barrier properties can be improved by the incorporation of antioxidants but are strongly dependent on the amount and structure of the antioxidant added.     

A Heat-Conduction Flow Microcalorimeter for Solute Transfer Enthalpy Determinations. Design And Calibration

Abstract

The construction of a heat-conduction flow microcalorimeter of the twin type, that uses thermopiles to detect thermal changes in the reference and reaction cells, is described. For comparative purposes, gold and silver cells, with different geometric shapes, are used. The calorimetric set is immersed in a water thermostat at a temperature of 25.000 ± 0.005°C. The thermostat is placed in a room whose temperature is controlled to 25.0 ± 0.2°C by an air thermostat.

The calibration constant of the apparatus is determined for several values of electric work and power. Values of 22 WV¹ and 14 WV¹ are obtained for the gold and silver cells, respectively.

The influence of the flow rate on the potential signal is studied. Chemical calibrations are performed with HCl-NaOH, THAM-HCl (trihidroxymethylaminomethane), and urea-water systems at different flow rates. The results are in good agreement with those reported in the literature.     

Studies on the synthesis of diacetyl over oxidation zeolite catalysts

Diacetyl (2,3-butanedione) synthesis from methyl ethyl ketone over oxidation zeolites using O₂ as oxidant was studied. Various zeolites with Fe, V and Ti as active sites were employed. VS-1, Ti-NCL, Ti-MCM-41 and FeBEA type materials were synthesized and characterized by BET, FTIR, XRD, pyridine adsorption and template desorption. The detailed study of the effect of reaction temperature, the effect of concentration of oxygen and the addition of water was realized. The most active catalyst was zeolites with V as oxidation center.     

And Yet It Moves: Oxidation of the Nuclear Autoantigen La/SS-B Is the Driving Force for Nucleo-Cytoplasmic Shuttling

Decades ago, we and many other groups showed a nucleo-cytoplasmic translocation of La protein in cultured cells. This shuttling of La protein was seen after UV irradiation, virus infections, hydrogen peroxide exposure and the Fenton reaction based on iron or copper ions. All of these conditions are somehow related to oxidative stress. Unfortunately, these harsh conditions could also cause an artificial release of La protein. Even until today, the shuttling and the cytoplasmic function of La/SS-B is controversially discussed. Moreover, the driving mechanism for the shuttling of La protein remains unclear. Recently, we showed that La protein undergoes redox-dependent conformational changes. Moreover, we developed anti-La monoclonal antibodies (anti-La mAbs), which are specific for either the reduced form of La protein or the oxidized form. Using these tools, here we show that redox-dependent conformational changes are the driving force for the shuttling of La protein. Moreover, we show that translocation of La protein to the cytoplasm can be triggered in a ligand/receptor-dependent manner under physiological conditions. We show that ligands of toll-like receptors lead to a redox-dependent shuttling of La protein. The shuttling of La protein depends on the redox status of the respective cell type. Endothelial cells are usually resistant to the shuttling of La protein, while dendritic cells are highly sensitive. However, the deprivation of intracellular reducing agents in endothelial cells makes endothelial cells sensitive to a redox-dependent shuttling of La protein.     

Establishing In-House Cutoffs of CSF Alzheimer’s Disease Biomarkers for the AT(N) Stratification of the Alzheimer Center Barcelona Cohort

Background: Clinical diagnosis of Alzheimer’s disease (AD) increasingly incorporates CSF biomarkers. However, due to the intrinsic variability of the immunodetection techniques used to measure these biomarkers, establishing in-house cutoffs defining the positivity/negativity of CSF biomarkers is recommended. However, the cutoffs currently published are usually reported by using cross-sectional datasets, not providing evidence about its intrinsic prognostic value when applied to real-world memory clinic cases. Methods: We quantified CSF Aβ1-42, Aβ1-40, t-Tau, and p181Tau with standard INNOTEST^® ELISA and Lumipulse G^® chemiluminescence enzyme immunoassay (CLEIA) performed on the automated Lumipulse G600II. Determination of cutoffs included patients clinically diagnosed with probable Alzheimer’s disease (AD, n = 37) and subjective cognitive decline subjects (SCD, n = 45), cognitively stable for 3 years and with no evidence of brain amyloidosis in 18F-Florbetaben-labeled positron emission tomography (FBB-PET). To compare both methods, a subset of samples for Aβ1-42 (n = 519), t-Tau (n = 399), p181Tau (n = 77), and Aβ1-40 (n = 44) was analyzed. Kappa agreement of single biomarkers and Aβ1-42/Aβ1-40 was evaluated in an independent group of mild cognitive impairment (MCI) and dementia patients (n = 68). Next, established cutoffs were applied to a large real-world cohort of MCI subjects with follow-up data available (n = 647). Results: Cutoff values of Aβ1-42 and t-Tau were higher for CLEIA than for ELISA and similar for p181Tau. Spearman coefficients ranged between 0.81 for Aβ1-40 and 0.96 for p181TAU. Passing–Bablok analysis showed a systematic and proportional difference for all biomarkers but only systematic for Aβ1-40. Bland–Altman analysis showed an average difference between methods in favor of CLEIA. Kappa agreement for single biomarkers was good but lower for the Aβ1-42/Aβ1-40 ratio. Using the calculated cutoffs, we were able to stratify MCI subjects into four AT(N) categories. Kaplan–Meier analyses of AT(N) categories demonstrated gradual and differential dementia conversion rates (p = 9.815⁻²⁷). Multivariate Cox proportional hazard models corroborated these findings, demonstrating that the proposed AT(N) classifier has prognostic value. AT(N) categories are only modestly influenced by other known factors associated with disease progression. Conclusions: We established CLEIA and ELISA internal cutoffs to discriminate AD patients from amyloid-negative SCD individuals. The results obtained by both methods are not interchangeable but show good agreement. CLEIA is a good and faster alternative to manual ELISA for providing AT(N) classification of our patients. AT(N) categories have an impact on disease progression. AT(N) classifiers increase the certainty of the MCI prognosis, which can be instrumental in managing real-world MCI subjects.     

Gel mechanical properties of milk whey protein–dextran conjugates obtained by Maillard reaction

The effect of Maillard reaction on the mechanical properties of whey protein isolate (WPI) heat-induced gels was evaluated. WPI and dextran (15–25 kDa) conjugates were obtained by controlled dry heating during storage at 60 °C and 63% relative humidity for 2, 5 and 9 days. Changes in browning intensity and content of free amino groups were used to estimate the Maillard reaction. A decrease in free amino groups of WPI was observed when increasing polysaccharide concentration and reaction time. An increase in both a* and b* CIE Lab colour parameters indicated the development of a reddish-brown colour, typical of the Maillard reaction. Uniaxial compression and stress relaxation tests were performed to measure the mechanical properties of mixed and conjugate gels. Maillard reaction significantly modified the mechanical properties of WPI/DX gels, and even prevented fracture when conjugate gels were subjected to 80% deformation in uniaxial compression test.     

Targeting CD10 on B-Cell Leukemia Using the Universal CAR T-Cell Platform (UniCAR)

Chimeric antigen receptor (CAR)-expressing T-cells are without a doubt a breakthrough therapy for hematological malignancies. Despite their success, clinical experience has revealed several challenges, which include relapse after targeting single antigens such as CD19 in the case of B-cell acute lymphoblastic leukemia (B-ALL), and the occurrence of side effects that could be severe in some cases. Therefore, it became clear that improved safety approaches, and targeting multiple antigens, should be considered to further improve CAR T-cell therapy for B-ALL. In this paper, we address both issues by investigating the use of CD10 as a therapeutic target for B-ALL with our switchable UniCAR system. The UniCAR platform is a modular platform that depends on the presence of two elements to function. These include UniCAR T-cells and the target modules (TMs), which cross-link the T-cells to their respective targets on tumor cells. The TMs function as keys that control the switchability of UniCAR T-cells. Here, we demonstrate that UniCAR T-cells, armed with anti-CD10 TM, can efficiently kill B-ALL cell lines, as well as patient-derived B-ALL blasts, thereby highlighting the exciting possibility for using CD10 as an emerging therapeutic target for B-cell malignancies.     

Morphology,thermal and mechanical properties of PVC/MMT nanocomposites prepared by solution blending and solution blending + melt compounding

Two types of montmorillonite (MMT), natural sodium montmorillonite (Na-MMT) and organically modified montmorillonite (OMMT), in different amounts of 1, 2, 5, 10 and 25 phr (parts per hundred resin), were dispersed in rigid poly (vinyl chloride) by two different methods: solution blending and solution blending + melt compounding. The effects on morphology, thermal and mechanical properties of the PVC/MMT nanocomposites were studied by varying the amount of Na-MMT and OMMT in both methods. SEM and XRD analysis revealed that possible intercalated and exfoliated structures were obtained in all of the PVC/MMT nanocomposites. Thermogravimetric analysis revealed that PVC/Na-MMT nanocomposites have better thermal stability than PVC/OMMT nanocomposites and PVC. In general, PVC/MMT nanocomposites prepared by solution blending + melt compounding revealed improved thermal properties compared to PVC/MMT nanocomposites prepared by solution blending. Vicat tests revealed a significant decrease in Vicat softening temperature of PVC/MMT nanocomposites prepared by solution blending + melt compounding compared to unfilled PVC.     

Comparative Antimicrobial Activity of Silver Nanoparticles Obtained by Wet Chemical Reduction and Solvothermal Methods

The synthesis of nanoparticles from noble metals has received high attention from researchers due to their unique properties and their wide range of applications. Silver nanoparticles (AgNPs), in particular, show a remarkable inhibitory effect against microorganisms and viruses. Various methods have been developed to obtain AgNPs, however the stability of such nanostructures over time is still challenging. Researchers attempt to obtain particular shapes and sizes in order to tailor AgNPs properties for specific areas, such as biochemistry, biology, agriculture, electronics, medicine, and industry. The aim of this study was to design AgNPs with improved antimicrobial characteristics and stability. Two different wet chemical routes were considered: synthesis being performed (i) reduction method at room temperatures and (ii) solvothermal method at high temperature. Here, we show that the antimicrobial properties of the obtained AgNPs, are influenced by their synthesis route, which impact on the size and shape of the structures. This work analyses and compares the antimicrobial properties of the obtained AgNPs, based on their structure, sizes and morphologies which are influenced, in turn, not only by the type or quantities of precursors used but also by the temperature of the reaction. Generally, AgNPs obtained by solvothermal, at raised temperature, registered better antimicrobial activity as compared to NPs obtained by reduction method at room temperature.