含硫氰酸盐、硫化物固体废物中总氰化合物测定方法

实验建立了含硫氰酸盐、硫化物固体废物中总氰化合物的测定方法,采用硝酸银滴定法、异烟酸-吡唑啉酮分光光度法分别测定总氰化合物含量高、低的样品。通过条件实验优化了前处理方式、称样量和干扰去除方法。该方法测定结果的相对标准偏差为0.43%～1.33%,加入标准物质回收率为91.5%～101.5%,精密度和准确度良好,符合测定要求。     

MnS夹杂物诱发钢材点蚀综述

MnS夹杂物诱发钢材点蚀,对钢材服役寿命、工作生产安全和社会经济发展产生巨大危害。首先,分析了MnS夹杂物诱发钢材点蚀的机理,包括电偶腐蚀机理、S和Cl-协同作用机理、封闭区域加速点蚀机理、贫铬区机理和微缝隙机理;其次,汇总了MnS夹杂物大小、形貌、分布,Cl-浓度、温度和应力对MnS夹杂物诱发钢材点蚀的影响;然后,总结了钢材防腐蚀的常用措施;最后,展望了防止MnS夹杂物诱发钢材点蚀的未来研究方向。     

GCrl5轴承钢精炼渣对夹杂物祛除行为的研究

通过建立的夹杂物穿越钢渣界面运动模型,研究了精炼渣对夹杂物的吸附现象。结果表明,夹杂物 粒径、表面张力和熔渣粘度是影响夹杂物冲破钢渣界面的重要参数,大型夹杂物中粒径和熔渣粘度起决定作用,而 ≤ 20㎛ 级别的小型夹杂物中仅表面张力起决定作用;大型夹杂物冲破钢渣界面的能力远大于小型夹杂物。针对 小型夹杂物难以吸附的问题,运用了夹杂物运动模型和熔渣、钢液表面张力模型,研究了表面张力对吸附过程的影 响。结果表明,直径≤ 122.9 ㎛尺寸的夹杂物均无法穿越钢渣界面,回弹至钢液一侧,由此得出：无法通过调整精 炼渣用以吸附≤ 122.9 ㎛夹杂物以达到进一步降低钢中氧含量的目的。     

Synergistic inhibition between o-phenanthroline and chloride ion for steel corrosion in sulphuric acid

The corrosion inhibition of cold rolled steel in 0.5 M sulphuric acid in the presence of o-phenanthroline and sodium chloride (NaCl) has been investigated by using weight loss and electrochemical techniques. The experimental data suggest that the inhibition efficiency increases with increasing NaCl concentration in the presence of 0.0002 M o-phenanthroline, but decreases with increasing temperature. A synergistic effect is observed when o-phenanthroline and chloride ions are used together to prevent cold rolled steel corrosion in 0.5 M sulphuric acid. The polarization curves showed that the complex of o-phenanthroline and NaCl acts as a mixed type inhibitor. The experimental results suggested that the presence of chloride ions in the solution stabilized the adsorption of o-phenanthroline molecules on the metal surface and improved the inhibition efficiency of o-phenanthroline. The adsorption of the complex accords with the Langmuir adsorption isotherm. Some thermodynamic parameters such as adsorption heat, adsorption entropy and adsorption free energy have been calculated by employing thermodynamic equations. Kinetic parameters such as apparent activation energy and pre-exponential factor have been calculated and discussed.     

Preparation and properties of nanosize MnZn ferrite from δ-FeOOH

Ferrous ion was transformed into feroxyhyte (δ-FeOOH) by oxidation. Then, manganese sulfate and zinc sulfate in some ratio were added to the feroxyhyte solution. The co-precipitation was boiling reflux conditions sometime under constant stirring. The nanosize MnZn ferrite powder was formed. The mechanism of preparation of the nanosize MnZn ferrite was discussed, and the formation of feroxyhyte which was playing a key role during the process was mentioned. The properties of powder was tested by means of X-ray diffraction, transmission electron microscopy and vibrating sample magnetometer. The results show that the samples of spherical particles about 20 nm, which have characteristics of ferrimagnetism, has larger saturation magnetization, but the remanent magnetization and coercivity are comparatively smaller. The spinel MnZn ferrite nanosize powder was successfully prepared from δ-FeOOH at low temperature, with low-carbon steel and peroxide as main material.     

圆柱体相贯线上的圆角表示方法

在机械设计中，圆柱体相贯线上的圆角表示方法是CAD和计算机辅助设计中的难题，所有的CAD／CAM软件都没有这一功能，多数使用者采用的是各种近似方法。本文介绍了严密精确的设计和几何造型方法，可用于大型铸锻件和重型机械的CAD和计算机辅助设计。     

高层住宅结构设计

主要介绍长沙梦泽园高层住宅从基础到上部楼层各部位的结构设计,以及在设计、施工过程中所考虑的一些问题及处理方法。