固体超强酸S_2O_8~(2-)/SnO_2-SiO_2催化合成环己酮1,2-丙二醇缩酮

采用沉淀-浸渍法制备了固体超强酸S2O28-/SnO2-SiO2,以它为催化剂催化环己酮和1,2-丙二醇合成了环己酮1,2-丙二醇缩酮;考察了带水剂种类及用量、酮醇摩尔比、催化剂用量、反应时间对产品收率的影响,并用正交实验对反应条件进行了优化。实验结果表明,适宜的反应条件为:n(环己酮)∶n(1,2-丙二醇)=1∶1.6、催化剂用量为反应物料总质量的2.0%、带水剂环己烷用量5.0mL、反应时间50min。在此条件下,环己酮1,2-丙二醇缩酮收率达到91.47%;催化剂的稳定性良好,在重复使用5次后环己酮1,2-丙二醇缩酮收率为82.20%,活性下降的主要原因为催化剂表面积碳和吸附了有机物;经傅里叶变换红外光谱和气相色谱质谱分析表明,产物为环己酮1,2-丙二醇缩酮,纯度为100%。     

Amplification and expression of c-erbB2 oncogene in normal, hyperplastic, and malignant endometria

OBJECTIVE: To study the correlation of development and survival with amplification of c-erbB2 oncogene in endometrial carcinoma. METHODS: The amplification and expression of c-erbB2 oncogene were determined from formalin-fixed, paraffin-embedded tissues of 25 normal, 31 hyperplastic, and 72 malignant samples of the endometrium in 128 patients, using differential polymerase chain reaction (DPCR) and an immunohistochemical technique. RESULTS: Amplified c-erbB2 (2 to 12 copies) were found in two of 25 (8.0%) normal, 15 of 31 (48.4%) hyperplastic, and 45 of 72 (62.5%) malignant samples. When the results of DPCR were compared with those of the immunohistochemical method, the negative findings concide well with one another, i.e., nonamplification was associated with the absence of immunoreactivity. It was noted that the amplified c-erbB2 was found more significantly in complex and a typical hyperplasias than in simple hyperplasias. The high-level c-erbB2 amplification (at least five copies) was significantly correlated with the histological grade of endometrial carcinoma and vascular or lymphatic invasion. No correlation was seen between c-erbB2 amplification and overall survival in the present group of patients. CONCLUSIONS: The amplified c-erbB2 may play a potential role in the early development of some endometrial carcinomas. The high-level c-erbB2 amplification may identify a subset of aggressive endometrial carcinoma that involves vascular or lymphatic invasiveness and poor cell differentiation playing the role of a marker for clinical prognosis.     

基于公共存储器进行数据交换的高速数字图象处理系统

本文介绍了一种基于公共存储器进行数据交换的高速数字图象处理系统．给出了公共存储器的设计，描述了处理器对公共存储器的进程同步控制．     

Optimal Hybrid Control for Structures

A new method for integrated design of passive and active elements is presented. Rather than the existing qualitative selection of parameters for passive elements, a quantitative approach is proposed that finds optimal active and passive parameters with respect to an H₂/H_∞ performance requirement. This new approach automatically yields passive designs when the given performance limits are high enough and active (hybrid) designs when the given performance constraints are stringent. Furthermore, our algorithm finds the special performance requirement (the peak of the frequency response) that cannot be satisfied by any passive design. Hence this article shows how to determine when control is required rather than assuming a priori that it is or is not required. A simple design method given herein yields either passive, active, or hybrid designs depending only on the level of the performance constraints that are specified in the statement of the problem.     

Electron microscopic observations and DNA chain fragmentation studies on apoptosis in bone tumor cells induced by ~(153)Sm-EDTMP

ＥｌｅｃｔｒｏｎｍｉｃｒｏｓｃｏｐｉｃｏｂｓｅｒｖａｔｉｏｎｓａｎｄＤＮＡｃｈａｉｎｆｒａｇｍｅｎｔａｔｉｏｎｓｔｕｄｉｅｓｏｎａｐｏｐｔｏｓｉｓｉｎｂｏｎｅｔｕｍｏｒｃｅｌｓｉｎｄｕｃｅｄｂｙ１５３ＳｍＥＤＴＭＰＺｈｕＳｈｏｕＰｅｎｇ，Ｘｉａ...     

Direct imaging of a high-power diode laser cavity using a transparent indium-tin-oxide (ITO) contact

We describe a novel "see-through" indium-tin-oxide contact on the n-side of a high power unstable resonator semiconductor laser (URSL) that allows direct observation of the cavity during high power operation. Under optimized annealing conditions this transparent ITO contact has a low enough specific contact resistivity to permit normal high power CW operation of the URSL and allows the observation of filamentation. This contact scheme is applicable to a wide range of semiconductor lasers and is especially appropriate for high power devices. The same structure can also be used to obtain a 2-D thermal map of the laser cavity.     

Study on phase behavior–impact strength relationship of unsaturated polyester/polyurethane hybrid polymer network

The phase behavior of a hybrid polymer network (HPN) composed of poly[(propylene glycol maleate)-co-(propylene glycol phthalate)] crosslinked with styrene and polyester–urethane crosslinked with methylene-bis-ortho-chloroaniline was examined. The correlation between phase separation and impact strength of the HPNs is discussed. The composition of HPNs has an effect on their properties.     

Lubricating behavior of iron rhenate and its relation to matching pairs

The iron rhenate was compounded by chemical method, which may be generated during wear process of Fe-Re alloys at elevated temperature. The friction coefficient of iron rhenate has been determined by a pin-on-disc device. The results show that iron rhenate plays role of lubricating at RT-600 °C. The lubricating behavior is related to the matching pairs. The hardness of the materials of matching pairs, compatibility of iron rhenate with materials of matching pairs and surface roughness of disc affect the lubricating behavior of iron rhenate mostly. The principle of matching pairs is proposed. Project supported by the National Natural Science Foundation of China Synopsis of the first author Xiong Dangsheng. associated professor, born in 1960. Current research fields include high-temperature self-lubricating alloys and tribological properties of material.