A computational skin model: fold and wrinkle formation

This paper presents a computational model for studying the mechanical properties of skin with aging. In particular, attention is given to the folding capacity of skin, which may be manifested as wrinkles. The simulation provides visual results demonstrating the form and density of folds under the various conditions. This can help in the consideration of proper measures for a cosmetic product for the skin.     

Introduction to the special issue on IEEE NEWCAS 2017

A contactless detector is presented for evaluating hand tremors caused by exercise-induced fatigue and early Parkinson’s disease. The device consists of a spiral coil, a microcontroller, and an inductive sensor circuitry. Theory shows that the resonant frequency of the circuitry increases when the distance between the hand and the spiral coil decreases, thus small variations of distance from tremor can be detected from the changes of resonant frequencies. A mechanical hand was built for experiments to simulate human hand tremors with repeatability at a fixed frequency. The magnitudes and frequencies of the tremors in the mechanical hand were quantitatively identified using the inductive sensor. Hence, feasibility and accuracy of the contactless hand tremor detector were determined. A triaxial accelerometer was used for comparison. By comparing spectral distributions and magnitudes of the tremors, the inductive sensor performed better than the accelerometer. The detector was applied to evaluate actual hand tremors of three subjects who had undergone exercise to induce tremors. The tremor waveform amplitudes of the subjects were quantitatively analyzed by the standard deviations method. The increased signal energies of exercise-induced tremor within 8–12 Hz were confirmed. Then, a subject with early Parkinson’s disease was evaluated by the proposed hand tremor detector. The tremor magnitudes and frequencies of the patient hand were quantitatively identified within in 4–7 Hz. Therefore, the new contactless hand tremor detector can be developed as a clinical instrument for monitoring the fatigue symptoms of post-exercise and diagnosing the early Parkinson’s disease.     

Cluster-grouping: from subgroup discovery to clustering

We introduce the problem of cluster-grouping and show that it can be considered a subtask in several important data mining tasks, such as subgroup discovery, mining correlated patterns, clustering and classification. The algorithm CG for solving cluster-grouping problems is then introduced, and it is incorporated as a component in several existing and novel algorithms for tackling subgroup discovery, clustering and classification. The resulting systems are empirically compared to state-of-the-art systems such as CN2, CBA, Ripper, Autoclass and CobWeb. The results indicate that the CG algorithm can be useful as a generic local pattern mining component in a wide variety of data mining and machine learning algorithms.     

Instability during cohesive zone growth

Tensile microcracking of quasi-brittle materials is studied by means of micromechanics, based on (i) an elasto-damaging cohesive zone model accounting for cohesive softening and (ii) a dilute distribution of non-interacting microcracks of uniform orientation and size. Considering virgin microcracks (initially without cohesive zones), macroscopic tensile load increase results in growth of cohesive zones ahead of stationary (non-propagating) cracks and, subsequently, in crack propagation which, notably, will be encountered before the cohesive zones are fully developed i.e. onset of instable cohesive zone growth will be encountered at a load level (i) at which tractions are still transmitted across the inner edges of the cohesive zones and (ii) at which the separation at the inner edges of the cohesive zones is smaller than its critical value. Focusing on onset of instable cohesive zone growth, the chosen approach allows for accessing quantities characterizing the stability limit (e.g., the intensity of the macroscopic loading and the opening at the inner edges of the cohesive zones), without raising the need for non-linear Finite Element analyses. It is shown that the tensile macrostrength of materials containing virgin microcracks is larger than the one related to cracks with already initially fully developed cohesive zones, and related strength differences are quantified for a wide class of cohesive softening behavior. The proposed model is validated by comparing model predictions with an exact solution (available for the special case of constant cohesive tractions) and with results from reliable Finite Element analyses. The paper will be of interest for engineers involved in testing and/or in modeling of quasi-brittle media including cementitious materials and rock.     

Roller compacted concrete with contaminated recycled aggregates

Recycling waste building materials from construction and demolition (C&D) sites is increasingly investigated for economical and environmental reasons. Roller compacted concrete (RCC) is a special dry concrete mix; laid down and compacted like a soil, it is especially used for the construction of massive structures like dams or large horizontal surfaces like road foundation. In this paper, natural concrete slabs were cured in water, sea water, chloride solutions or sulphate solutions and then crushed to obtain virgin and contaminated (polluted) recycled aggregates. The aim of this research is the total replacement (100% coarse and fine) of natural aggregates (NA) by recycled concrete aggregates (RA) in the composition of a roller compacted concrete. The natural and recycled aggregates are characterised and compared. The mechanical properties and durability performances of concrete with contaminated RA are analysed. The experimental results showed that the polluted RA are much richer in chlorides than in sulphates and are leached if they are soaked in water. Significant differences were observed between the properties of original and new concrete and the results demonstrated the need of taking these contaminations into account.     

Cobalt removal from waste‐water by means of supported liquid membranes

BACKGROUND: Supported liquid membranes (SLM) are an alternative technique to remove and recover metals from diluted process solutions and waste‐water. In the present work, the removal of Co(II) from a synthetic CoSO₄ solution containing initial amounts of cobalt(II) in the range 100–200 ppm (0.1–0.2 g dm^?3) has been studied on a pilot scale. By performing batch equilibrium experiments, the optimal settings, i.e. the composition of the organic phase, the pH of the feed, the type and concentration of the stripping agent were determined. RESULTS: It is shown that the equilibrium characteristics of a synergistic extractant mixture containing di‐2‐ethyl‐hexylphosphoric acid (D2EHPA) and 5‐dodecylsalicylaldoxime (LIX 860‐I) are superior to D2EHPA. Both hydrochloric acid and sulfuric acid have been evaluated as stripping solutions in liquid–liquid extraction tests and as the receiving phase in a SLM configuration. Although equilibrium tests showed no difference in stripping characteristics between both chemicals, it was observed that in a SLM configuration the stability of the system when hydrochloric acid is used is poor. With a commercially available SLM module (Liqui‐Cel Extra‐Flow 4 × 28) having a surface area of 19 m², a steady Co(II) flux of 0.140 gm^?2h^?1 has been obtained at influent concentrations of cobalt between 100 and 200 ppm with 3 mol dm^?3 sulfuric acid as stripping phase. CONCLUSIONS: The results obtained show that a supported liquid membrane containing a synergistic mixture of LIX 860‐I and D2EHPA gives the possibility of recovering cobalt from dilute solutions. Copyright © 2008 Society of Chemical Industry     

EVS助力北京奥运会赛事转播——EVS设备在BOB及CCTV的成功应用

一奥运相关背景与数据2008年北京夏季奥运会设有28项比赛和302枚金牌,分别在37个比赛场馆举行。参加本次奥运会的运动员共有10708名。奥运会设有国际广播中心（IBC）,总面积为9万平方米。参与本届奥运会转播工作的工作人员共有16000人,其中BOB的工作人员有4000人。在奥运期间．BOB一共制作了4000小时的电视节目。