Fabrication and electrical performance of high-density arrays of nanometric silicon tips

We propose and demonstrate a simple and low cost process for the fabrication of large area arrays of nanometric silicon tips, for use as Field Emission Devices (FEDs). The process combines Interference Lithography (IL) with isotropic Reactive Ion Etching (RIE). Si tips with typical curvature radius of 20 nm and height of 900 nm were recorded with a periodicity of 1 μm (density of 10⁶ tips/mm²) covering a Silicon wafer of 2 in. The measurement of the electrical performance of the arrays demonstrates the feasibility of the association of these two techniques for recording Field Emission Tips.     

Assessment of soil and groundwater impacts by treated urban wastewater reuse. A case study: application in a golf course (Girona, Spain)

Starting in July 2000, treated wastewater of urban origin has been used for the "Serres de Pals" golf course irrigation (Girona, Spain). To evaluate if the soil and the aquifer underneath are affected by the utilization of this type of water, samples have been taken along a period of several months from the wastewater treatment plant, the stabilization lagoon, groundwater and soil profiles. Analyses have been performed for total coliforms and aerobic bacteria, soil water pressure and soil water content as well as chemical analyses of the irrigation water, aquifer and water of the vadose zone. Soil profiles taken at several times during the study indicate the absence of coliforms except for a short period during summer. In the vadose zone an increase of more than 1000 mg kg(-1) of NaO(2) in the top 60 cm of soil was observed while Cl(-) concentration in the aquifer reached up to 1200 mg l(-1) ten months after starting the irrigation.     

Simultaneous Determination of Multiclass Pesticides and Antibiotics in Honey Samples Based on Ultra-High Performance Liquid Chromatography-Tandem Mass Spectrometry

A simple, fast, and efficient method was developed for simultaneous determination of 79 pesticides and 13 antibiotics compounds of different chemical classes of pesticides and antibiotics in honey samples by ultra-high performance liquid chromatography with tandem mass spectrometry (UHPLC-MS/MS). The sample preparation procedure includes homogenization with McIlvaine buffer 0.1 mol L^?1 (pH 4), followed by extraction with acetonitrile and cleanup with florisil, using dispersive solid phase extraction (d-SPE). The proposed method was validated with good results, such as linearity (r ²?>?0.9901), normality, and independence of the evaluated data, as well as recoveries between 70 and 120 % with relative standard deviation (RSD) <20 % for most of the compounds spiked from 0.1 to 200 μg kg^?1. The experimental method limits of detection and quantification were from 0.03 to 1.51 μg kg^?1 and from 0.1 to 5 μg kg^?1, respectively, for the pesticides. For the antibiotics, the decision limits (0.1 to 2 μg g^?1) and the detection capacity (0.12 to 2.81 μg g^?1) were below the maximum residue limits (MRLs) established for honey by the Brazilian and European legislation. The method was successfully applied to real samples from different botanical and geographic origins. From them, 44 % presented residues from 0.12 to 10 μg kg^?1 of one or more analytes. The proposed method combines the advantages of a quick sample preparation step with the selectivity and sensitivity of the UHPLC-MS/MS and proved to be suitable for routine analyses.     

Autism and digital learning environments: Processes of interaction and mediation

Using a socio-historical perspective to explain social interaction and taking advantage of information and communication technologies (ICTs) currently available for creating digital learning environments (DLEs), this paper seeks to redress the absence of empirical data concerning technology-aided social interaction between autistic individuals. In terms of social interaction, autism can be likened to the negative of a photograph and it is currently one of the most disturbing and challenging syndromes. This study puts forward another viewpoint on the processes of interaction and mediation established in digital environments. Based on a 3-year multi-case study, which observed groups of autistic individuals in DLE-aided interaction activities, it identifies relevant technological categories that have an important contribution to make in the areas involved (Psychology, Education and Computer Science) in the development of a digital learning environment that takes the results achieved into account.     

Study of the injection molding of a polarizing beam splitter

We describe the replication of a relief grating that behaves like a polarizing beam splitter by injection molding. Measurements of the grating master, nickel shim, and replica, performed by atomic force microscopy, allow establishing a limit for the injection molding technique (currently used in CD fabrication) to aspect ratios of approximately 0.15. Although this limit strongly reduces the diffraction efficiency of the elements as well as their polarizing properties, extinction ratios of approximately 10:1 were measured for the replicas in a large range of wavelengths.     

SiO2 single layer for reduction of the standing wave effects in the interference lithography of deep photoresist structures on Si

We demonstrate that the use of a single SiO₂ film, with thickness corresponding to one standing wave (SW) period allows the recording of deep photoresist structures on silicon substrates by laser interference, without use of any additional antireflecting coating. This condition corresponds just to the opposite thickness (half SW period) previously proposed for using the SiO₂ films for phase-shifting the SW pattern. Theoretical and experimental results demonstrated that for the lithography of deep structures, the contrast of the SW pattern, the minimum light intensity of the SW pattern and the photoresist adhesion are the most important parameters of the process.     

Exploring and Analyzing the Systemic Delivery Barriers for Nanoparticles

Most nanomedicines require efficient in vivo delivery to elicit meaningful diagnostic and therapeutic effects. However, en route to their intended tissues, systemically administered nanoparticles often encounter delivery barriers. To describe these barriers, the term “nanoparticle blood removal pathways” (NBRP) is proposed, which summarizes the interactions between nanoparticles and the body's various cell-dependent and cell-independent blood clearance mechanisms. Nanoparticle design and biological modulation strategies are reviewed to mitigate nanoparticle-NBRP interactions. As these interactions affect nanoparticle delivery, the preclinical literature from 2011–2021 is studied, and the nanoparticle blood circulation and organ biodistribution data are analyzed. The findings reveal that nanoparticle surface chemistry affects the in vivo behavior more than other nanoparticle design parameters. Combinatory biological-PEG surface modification improves the blood area under the curve by ≈418%, with a decrease in liver accumulation of up to 47%. A greater understanding of nanoparticle-NBRP interactions and associated delivery trends will provide new nanoparticle design and biological modulation strategies for safer, more effective, and more efficient nanomedicines.     

Evaluation of nutritional characteristics and bioactive compounds of soursop-yoghurt and soursop-frozen dessert

Food Science and Biotechnology - The nutritional quality, sensory attributes, polyphenols and acetogenins content in yoghurt and frozen dessert formulated with soursop pulp were investigated. The...     

Determination of selenium in selected food samples from Argentina and estimation of their contribution to the Se dietary intake

An optimised FI-HGAAS method was applied to determine the total selenium concentrations in selected high consumption food (fish, beef, chicken, milk, rice, wheat flour, egg) and to estimate their contribution to the Argentinean dietary intake, whose information is scarce nowadays. Through several optimisation steps a suitable method was achieved showing satisfactory figures of merit for all matrices. Average recovery was 96%, RSD < 5%, LODs ranged 2.0–7.0 μg kg⁻¹ and the accuracy was assessed using DOLT-3 NRC certified reference material. Meat and eggs showed the highest values (in μg kg⁻¹, beef: 42–153; chicken: 62–205; fish: 94–314; canned tuna: 272–282; eggs: 134–217), minor values were found for wheat flour (22–42), rice: (<22), pasta (47–64) and milk (<7–9). An estimated intake of 32 and 24 μg day⁻¹ for adult men and women, respectively, suggested a deficient Se intake, leading to further comprehensive surveys of Se occurrence in Argentina.     

A Chimeric UDP-Glucose Pyrophosphorylase Produced by Protein Engineering Exhibits Sensitivity to Allosteric Regulators

In bacteria, glycogen or oligosaccharide accumulation involves glucose-1-phosphate partitioning into either ADP-glucose (ADP-Glc) or UDP-Glc. Their respective synthesis is catalyzed by allosterically regulated ADP-Glc pyrophosphorylase (EC 2.7.7.27, ADP-Glc PPase) or unregulated UDP-Glc PPase (EC 2.7.7.9). In this work, we characterized the UDP-Glc PPase from Streptococcus mutans. In addition, we constructed a chimeric protein by cutting the C-terminal domain of the ADP-Glc PPase from Escherichia coli and pasting it to the entire S. mutans UDP-Glc PPase. Both proteins were fully active as UDP-Glc PPases and their kinetic parameters were measured. The chimeric enzyme had a slightly higher affinity for substrates than the native S. mutans UDP-Glc PPase, but the maximal activity was four times lower. Interestingly, the chimeric protein was sensitive to regulation by pyruvate, 3-phosphoglyceric acid and fructose-1,6-bis-phosphate, which are known to be effectors of ADP-Glc PPases from different sources. The three compounds activated the chimeric enzyme up to three-fold, and increased the affinity for substrates. This chimeric protein is the first reported UDP-Glc PPase with allosteric regulatory properties. In addition, this is a pioneer work dealing with a chimeric enzyme constructed as a hybrid of two pyrophosphorylases with different specificity toward nucleoside-diphospho-glucose and our results turn to be relevant for a deeper understanding of the evolution of allosterism in this family of enzymes.