Spectral characterization of periglacial surfaces and geomorphological units in the Arctic Lena Delta using field spectrometry and remote sensing

Important environmental parameters in arctic periglacial landscapes (i.e. permafrost temperature, active-layer depth, soil moisture, precipitation, vegetation cover) will very likely change in a warming climate. The thawing of permafrost, especially, might cause massive landscape changes due to thermokarst and an enhanced release of greenhouse gasses from the large amounts of carbon stored in frozen deposits, resulting in positive climate-warming feedback. For the identification, mapping, and quantification of such changes on various scales up to the entire circum-Arctic, remote sensing and spatial data analysis are essential tools. In this study an extensive field-work dataset including spectral surface properties, vegetation, soils, and geomorphology was acquired in the largest Arctic delta formed by a single river, the Siberian Lena River Delta. A portable field spectrometer (ASD FieldSpec Pro FR®) was used for spectral surveys of terrain surfaces, and optical satellite data (Landsat Enhanced Thematic Mapper (ETM+), CHRIS-Proba) were used for the characterization, manual mapping, and automatic classification of typical periglacial land-cover units in the Lena Delta. Qualitative data from soils, vegetation, soil moisture, and relief units were correlated with the field-spectral data and catalogued for a wide variety of surface types. The wide range of micro- and meso-scale variations of periglacial surface features in the delta results in distinctive spectral characteristics for different land-cover units. The three main delta terraces could also be spectrally separated and characterized. The present dataset provides a basis for further spectral data acquisitions in the Lena Delta and for comparisons with periglacial surfaces from other regions.     

Development, fabrication, and test of a modular eddy current micro sensor on a flexible polymer foil

This paper describes the development and fabrication of a modular eddy current micro sensor on a flexible polymer foil. Due to handling purposes during the micro sensor fabrication process the modular eddy current micro sensors are fabricated on a temporary Si substrate. To enable a release of the micro sensors at the end of the fabrication process, initial investigations concentrated on the proof of principle applying a deep reactive-ion etching (DRIE) process to structure the Si wafer. The DRIE process was used to structure Si frames, which serve as carriers for the modular micro sensors. For the evaluation of the fabricated eddy current micro sensors, electrical resistance measurements were accomplished with the integrated anisotropic magneto-resistance (AMR) sensor. The aim of these investigations was to evaluate the influence of the substrate material on the characteristics of the AMR sensor. The electrical output signal of these micro sensors were subsequently compared to electrical resistance measurements of identical AMR sensors fabricated on a Si substrate and served as reference. To prove the capability of the completed eddy current micro sensors, a defect in form of a scratch was created on the surface of a Cu probe and investigated by eddy current testing. The electrical output signal of the eddy current micro sensor was subsequently compared to an optical measurement of the surface profile of this scratch. There is a high correlation between the optical measurements and the signal of the eddy current micro sensor.     

Production of Polyunsaturated Fatty Acids by Mortierella alpina Using Submerse and Solid State Fermentation

A new isolate of Mortierella alpina, > 98 % identical with M. alpina ATCC 16266, was cultivated in a defined glucose‐based medium with three organic nitrogen sources (glycine, urea and Na‐L‐glutamate) at three different concentrations in shaking flasks at 20 °C. The results were compared to the cultivation in complex medium with yeast extract as nitrogen source. In the defined media, high yields of polyunsaturated fatty acids (PUFAs) and arachidonic acid (ARA), respectively, were obtained with Na‐L‐glutamate. However, the absolute highest yields of PUFA and ARA were measured with the yeast extract medium. An optimized yeast extract complex medium was used for a submerse bioreactor cultivation in a 45‐L scale. Furthermore, M. alpina was cultivated in a solid state fermenter, using an oat bran water mixture as substrate.     

Application of the Electrodiffusion Method to Measure Wall Shear Stress: Integrating Theory and Practice

The electrodiffusion method has been used in fluid dynamic research for the past 50 years. It allows the measurement of wall shear stress, a crucial parameter, e.g., for the cleaning of membrane modules used in water filtration. Various authors have published articles dealing with the theory behind this technique. But no paper collects all the knowledge assembled over five decades of application. Here, comprehensive summary of the theory of steady flow, unsteady flow, and transient voltage step experiments is given. Factors influencing the accuracy of the measurements are discussed. Furthermore, a new approach to calibrate the system from voltage step experiments is introduced, and practical issues related to its application in flow measurements are discussed for an exemplary signal response to a near‐wall flow.     

Computability and Complexity in Self-assembly

This paper explores the impact of geometry on computability and complexity in Winfree’s model of nanoscale self-assembly. We work in the two-dimensional tile assembly model, i.e., in the discrete Euclidean plane ℤ×ℤ. Our first main theorem says that there is a roughly quadratic function f such that a set A⊆ℤ⁺ is computably enumerable if and only if the set X _A ={(f(n),0)∣n∈A}—a simple representation of A as a set of points on the x-axis—self-assembles in Winfree’s sense. In contrast, our second main theorem says that there are decidable sets D⊆ℤ×ℤ that do not self-assemble in Winfree’s sense.     

Quantifying changes in weak layer microstructure associated with artificial load changes

Researchers and practitioners have long utilized a variety of penetrometers to investigate the snowpack. Identifying definitive relationships between penetrometer-derived microstructural information and stability has been challenging. The purpose of this study is two-fold: 1. We propose a simple field test to establish relationships between load and penetrometer-derived microstructural estimates, 2. We utilize the SnowMicroPen (SMP) to quantify changes in weak layer residual strength and microstructural dimension associated with an artificial loading event. Our dataset is from Moonlight Basin, Montana and includes three modified loaded-column tests, each paired with 5 SMP profiles. Depth hoar comprised the targeted weak layer. Results indicate that loading caused the residual strength and rupture frequency to decrease significantly. Much like a compression test at a micro-scale, the force required for the SMP to rupture individual structures as well as the micro-scale strength decreased significantly when the slab stress was increased by artificially adding blocks of snow. A decrease in observed rupture frequency within the weak layer (or an increase in the distance between ruptured structures) also occurred after the loading event, probably because some structures within the weak layer had already failed or were so close to failing that the penetrometer could not detect their rupture. Due in part to the large difference in loads, microstructural differences between the natural and loaded columns were significant enough that only one profile would have been necessary to determine a significant difference in residual strength. Artificial removal of slab stress resulted in greater rupture forces and larger microstructures, likely due to elastic rebound.     

Performance analysis of three-phase inverters controlled bysynchronous delta-modulation systems

Synchronous delta-modulation systems are used to control resonant voltage link inverters, where switching has to be synchronized with the zero crossings of the link voltage. This paper shows that output current harmonic distortion and average switching frequency of such systems can be calculated analytically in spite of the quasistochastic behavior of the modulators output. Under the assumption of constant link frequency and large ratio of link to output frequency, results are derived for three-phase sigma-delta modulation, space-vector based sigma-delta modulation, and current-regulated delta modulation. The results hold for any shape of the inverter input voltage (including DC). The output current harmonic distortion of resonant link inverters is compared with conventional hard switching PWM inverters     

Computer-algebra calculations and measurements on AB spin systems for double-spin-echo sequences

The time evolution of the density operator of an AB spin system during a double-spin-echo pulse sequence is evaluated analytically by a computer-algebra system. The computer-algebra system allows one to generate the extensive formulas describing the density operator and yields an expression for the integral of the spectral signals. The simulation of spectra for arbitrary sequence timings can be easily performed by this new tool without risking errors that might occur in conventional calculations. The computer-algebra method can be extended straightforward to other pulse angles and types of sequences. The double-spin-echo pulse sequence is used in the point-resolved spectroscopy (PRESS) method which is often applied for volume selective examinationsin vivo. For verification of the results generated by the computer-algebra system,¹H spectra from a half-liter spherical sample with an aqueous solution that was 0.1 M in sodium citrate and 0.1 M in sodium acetate were recorded after 90°-180°-180° double-spin-echo pulse sequences on a 1.5-T whole-body unit. The measured behavior of the citrate AB spin system corresponds very well with the theoretical predictions. Thus, the theory provides the basis for the optimization of sequence timings for double-spin-echo measurements with high signal gain from AB systems as, for example, citrate. In addition, the theoretically predicted signal modulations could be fitted to the experimental data, providing the transverse relaxation time of the AB-coupled protons.