Mechanism of alloying element vaporization during laser welding

Vaporization of alloying elements is a serious problem in the laser welding of many important engineering alloys. Since the available mass transfer correlations are not applicable for credible assessment of the rates of transport of vaporized species in the gas phase, the role of gas phase mass transfer in the overall vaporization of alloying elements was examined by conducting several critical experiments. The rates of transport of alloying elements in the weld pool were determined from numerically computed fluid flow fields. Since the weld pool is surrounded by plasma during laser welding, the role of plasma in the vaporization of alloying elements was physically modeled by allowing molten copper drops to vaporize isothermally both in the presence and absence of plasma. The transport of alloying elements in both liquid and gas phases was found to be rapid and the overall vaporization rates were controlled by the plasma influenced intrinsic vaporization of alloying elements at the weld pool surface. The experimentally obtained rates of vaporization of alloying elements from laser melted stainless steel weld pools were compared with the corresponding theoretically calculated values.     

Cavitation Damage of the single-crystal nickel-base superalloy SRR99 during creep at 850°C

Various heat treatments of the single-crystal nickel-base superalloy SRR99 have been carried out to produce a wide range of initial γ′ phase morphology. The cavitation damage has been studied after creep fracture at 850°C and stresses between 400MPa and 650 Mpa. The crep fracture surfaces and longitudinal sections of crept specimens have been examined by image analysing system in order to determine the size distribution and the area fraction of (001)-planes cracks on fracture surface characterise the creep crack damage level. The cracking morphology in fractured material as a function of stress and γ′-phase size has also been investigated. The results show, that crack propagation occurred anisotropically on (001) crystallographic planes perpendicular to the aplied stress along the γ/γ′ interfaces. It was found, that creep cracks dependent on the shape and size of γ′-phases developing at the temperature and stress level.     

Yeast exo-β-glucanases can be used as efficient and readily detectable reporter genes in Saccharomyces cerevisiae

Yeast exo-1,3-β-glucanases are secretable proteins whose function is basically trophic and may also be involved in cell wall glucan hydrolytic processes. Since fluorescein di(β-D -glucopyranoside) is a fluorogenic substrate detectable and quantifiable by flow cytometry, it was used for testing the ability of the EXG1 gene product of Saccharomyces cerevisiae and its homologous gene in Candida albicans to function as reporter genes. These open reading frames were coupled to different promoters in multicopy plasmids, and exoglucanase activity quantified at flow cytometry. Exoglucanases were found to be useful tools for the study of promoter regions in S. cerevisiae. This technique has the advantage over other reporter gene systems—such as β-galactosidase fusions—that it does not require permeabilization of yeast cells and therefore it allows the recovery of viable cells—by sorting—after flow cytometry analysis.     

Numerische Simulation der Faserbewegung beim Strangpressen kurzfaserverstärkter Glasschmelzen

Numerical Simulation of the Fibre-Motion during the Extrusion of Short-Fibre-Reinforced Glass-Melts Fibre-reinforced materials are characterized by an anisotropic behaviour of the mechanical properties, which is caused by the alignment of the embedded fibres. In the case of short-fibre-compounds this behaviour is strongly influenced by the mechanism of flow during the manufacturing process. Numerical simulation Methods are preferentially used to get informations about the orientation of the reinforced fibres at the end of the molding-process and to improve the properties of the compound. For that, a model is developed, which calculates the motion of the short-fibres in the area of flow, basing on a three-dimensional finite-element-computation. Thereby the interaction between the Particular fibres during the orientation process is considered by using an interaction coefficient. Examplified at the extrusion of short fibre reinforced glass-melts, the fibre orientation is determined at models with different geometries of the pressing tool and variable boundary conditions. This procedure allows to determine the influence of the process-parameters On the expected quality of the composite. The represented simulation-model can also be used for other molding- and extrusion-processes of fibre reinforced materials.     

High speed BiCMOS current mode differential track-and-hold circuit

A new principle for a high speed BiCMOS differential track-and-hold circuit based on current mode processing is presented, and simulation results are given. The main characteristics are an acquisition time of 5.5 ns for 8 bit precision and a small-signal bandwidth of 1 GHz