Ni/Pillared Clays as Catalysts for the Selective Catalytic Reduction of Nitrogen Oxides by Propene

Different and alternative methods for the preparation of Ni/pillared clays based on impregnation and encapsulation procedures are reported. Several nickel precursors and metal loadings are considered in order to evaluate their influence on the structural, textural and catalytic properties of the resulting solids. The behaviour of the optimum solids as catalysts has been proved in the selective catalytic reduction of nitrogen oxides with propene, and the relevance of the oxidant nature was checked by changing the composition of the oxidant mixture. Of all the factors studied, the nature of the nickel precursors appears as the most important one, owing to the formation of different active nickel species during the synthesis procedure.     

Multi-site phase transfer catalyst assisted radical polymerisation of glycidyl methacrylate using potassium peroxydisulphate as initiator – a kinetic study

In this work, the kinetics and mechanism of free-radical polymerisation of glycidyl methacrylate (GMA) using potassium peroxydisulphate (PDS) as water soluble initiator in the presence of synthesized 1, 4-Bis (tributyl methyl ammonium) benzene dichloride (TBMABDC) as multi-site phase transfer catalyst (MPTC) was studied. The polymerisation reactions were carried out under inert and unstirred conditions at constant temperature of 60 ± 1°C in cyclohexane/water biphase media. The role of concentrations of monomer, initiator, catalyst and volume fraction of aqueous phase, solvent polarity and temperature on the rate of polymerisation (Rp) was ascertained. The order with respect to monomer and initiator was found to be unity. The order with respect to catalyst was found to be 0.51. The rate of polymerisation is independent of ionic strength and pH of the medium. However, an increase in the polarity of solvent has slightly increased the Rp value. Based on the results obtained, a suitable kinetic scheme has been proposed to account for the experimental observations and its significance discussed.     

Similarity of Stress-Singularity Problems for Materials with Linear and Bilinear Behaviors

An analogy is established between the solutions of the problems of singularities of stresses in linear and bilinear elastic isotropic media. It is shown that the distributions of stresses and displacements in the vicinity of singular points on the boundary of the body (characterized by the singularities of stresses) are described, in both cases, by the same functional dependences on the space coordinates but with different characteristics of the material. We deduce expressions for the effective moduli of elasticity and Poisson's ratio of the bielastic medium including the parameter of hardening of the material. The solution of the problem of singularities of stresses in bilinear materials is obtained from the solution of the corresponding problem for the linear elastic medium by replacing the elastic constants with the corresponding effective values depending on the parameter of hardening of the material. The cases of wedge-shaped notches (for various boundary conditions imposed on their edges), two-component wedges, plane wedge-shaped cracks, and circular conic notches or rigid inclusions in the bielastic space are studied in detail.     

Assessment of a Flexible Architecture for Distributed Control*

Production pipelines of manufactory industries present several machines and robots in which the movements of interpolated axes are managed by computerized numerical controls (CNCs). These are typically synchronized with several other simpler actuators along the pipeline of production. CNCs have to be flexible, easily expandable, and reusable, when pipelines of production are frequently reconfigured to realize different arranged pipelines with different technical requirements. In this paper, the assessment of a flexible CNC for such reconfigurable pipelines is presented. The analysis has been focused on defining objective metrics that can be applied for assessing performance and feasibility of distributed controls for pipelines. The method proposed has been applied on the distributed control architecture defined in the MUPAAC ESPRIT HPCN (Multi Processor Architecture for Automatic Control, High Performance Computer Networking of the European Commission). MUPAAC architecture and prototype has been assessed in order to identify the critical configurations and the limits of the architecture.     

Influence of halide ions and alloy microstructure on the passive and localized corrosion behavior of alloy 22

Alloy 22 (N06022) is the current candidate alloy used to fabricate the external wall of the high-level nuclear waste containers for the Yucca Mountain repository. It was of interest to study and compare the general and localized corrosion susceptibility of Alloy 22 in fluoride and chloride solutions at 90 °C. Standard electrochemical tests such as cyclic potentiodynamic polarization, amperometry, and electrochemical impedance spectroscopy were used. Studied variables included the solution pH and the alloy microstructure (thermal aging). Results show that Alloy 22 is highly resistant to general corrosion in all the solutions tested. Thermal aging is not detrimental and even seems to be slightly beneficial for general corrosion at the higher solution pHs. Pitting corrosion was never observed. Crevice corrosion was found only for high chloride-containing solutions after anodic polarization. The presence of fluoride ions together with chloride ions seems to increase the susceptibility of Alloy 22 to crevice corrosion compared to pure chloride solutions. This article is based on a presentation made in the symposium “Effect of Processing on Materials Properties for Nuclear Waste Disposition,” November 10–11, 2003, at the TMS Fall meeting in Chicago, Illinois, under the joint auspices of the TMS Corrosion and Environmental Effects and Nuclear Materials Committees.     

A new stereological principle for test lines in three-dimensional space

A new principle is presented to generate isotropic uniform random (IUR) test lines hitting a geometric structure in three-dimensional space (3D). The principle therefore concerns the estimation of surface area, volume, membrane thickness, etc., of arbitrary structures with piecewise smooth boundary. The principle states that a point-sampled test line on an isotropic plane through a fixed point in 3D is effectively an invariant test line in 3D. Particular attention is devoted to the stereology of particles, where an alternative to the surfactor method is obtained to estimate surface area. An interesting case arises when the particle is convex. The methods are illustrated with synthetic examples.     

Generation of Gas Discharge Plasma by an Arc Source with a Cold Hollow Cathode

The results from a study of an arc plasma source with a cold hollow cathode are presented. The source generates plasma with a density of ∼10¹⁰ cm⁻³ in a volume of ∼0.2 m³ at discharge currents of up to 150 A, an arc discharge operating voltage of 30–40 V, and a low pressure of 0.1–1 Pa. The motion of the cathode spot in the crossed electric and magnetic fields inside the hollow cathode and the cathode’s special design make it possible to eliminate almost completely the penetration of the sputtered cathode material into the working vacuum chamber.__________Translated from Pribory i Tekhnika Eksperimenta, No. 3, 2005, pp. 62–66.Original Russian Text Copyright © 2005 by Schanin, Koval, Akhmadeev.     

Influence of generator load conditions on third-harmonic voltages in generator stator winding

The influence of changes in load conditions of the generator-transformer unit on the operating conditions of the 100% ground-fault protection of the generator stator winding based on the third-harmonic voltages was analyzed. The analyzed stator ground-fault protection system is by ratio of the voltages third harmonic in generator neutral and at the generator terminals. The third-harmonic voltages were determined on the base of the experimental tests (measurements) run in real conditions at changes in active and reactive load conditions of the generator. It was found that mainly the generator active load influences the voltage feeding the measuring element of ground-fault protection. Therefore, determining operating conditions of ground-fault protection the influence of the generator active and reactive load should be deeply considered. This can ensure the proper operation of the ground-fault protection based on the voltage third harmonics in the whole range of the changes in generator load. Considering the influence of changes in generator load on the third-harmonic voltages (feeding measuring element of the protection system) will allow eliminating irregular generator tripping as a result of unselective operation of these protections.     

Robust autoregressive predictive power control method for mobile CDMA systems

A closed-loop power control (CLPC) scheme with a multistep (indicating multiple prediction steps) linear autoregressive predictor is presented. The proposed CLPC relies on low-rate sample vector based autoregressive prediction. Compared to currently available predictive CLCP schemes, it demonstrates particularly robust performance in the presence of large loop delays and channel estimation errors.     

Effect of Thin Film Thicknesses and Materials on the Response of RTDs and Microthermocouples

Fabrication and thermal characterization of a resistance temperature detector (RTD) heater and microthermocouples (MTs) on silicon substrates have been reported in this paper. The influence of film thickness and nickel-gold (Au) electroplating on RTD on its steady-state temperature with respect to its steady-state electrical power input and resistance is studied. Further, the thermal effects of multiple thermocouples in a thermopile as well as the effects of Au layers in the contact pads of the thermopiles on their open-circuit Seebeck voltage are studied. Therein lies the novelty of this paper. The in situ operating relationships for the RTD heater and the MT are provided