医用纺织品应用概述

1　前言自有历史记载以来就有用纺织品作人体可移植品的记录。在古埃及就已经知道亚麻线可用于外科手术的缝合来封闭病人的伤口。在最近的60年内由于纤维纺纱技术的进步 ,有了合成聚合物 ,纺织物用于人体的各种用途聚增。这只是仿生学革命的一部分 ,新的生物材料和生态纺织品被生产并用于修补和替代有疾病的、受伤的组织和器官。2　定义英国利物浦大学教授Ｄ .Ｆ .Ｗｉｌｌｉａｍｓ提出了“生物材料”这一新概念。最近纺织结构产品用作人体移植品的用途越来越多。生物纺织物的定义如下 :由纺织纤维组成的结构设计用于特殊的生态环境 (例如外…     

An innovative semianalytical technique for ceramic evaluation at microwave frequencies

We have developed an innovative semianalytical technique for various substrate material characterization. The developed technique is a measurement procedure and data-reduction formulation that takes into consideration the radiation loss in a resonant structure, allowing for a more effective means of dielectric- and conductor-loss determination for a microstrip ring resonator and its substrate material. We separate dielectric and conductor loss precisely, evaluate the contribution of each term in the overall loss performance, and analytically predict the error in their respective predicted value.     

On compressible subsonic flow between impeller and casing of radial-flow compressors with superposed throughflow

Summary Subject of this paper is the numerical investigation of the flow between impeller and casing of compressors of radial construction. The solution procedure is based on implicite difference equations, in which parameters of material such as heat conductivity, viscosity and density are variable. Because of the assumption of low density, laminar flow conditions are assumed. The computation method makes possible the determination of the torque coefficient as a function of Reynolds-and Mach number as well as of geometry and superposed throughflow.With 3 Figures     

INHIBITION OF BOTULINUM TOXIN PRODUCTION BY PEDIOCOCCUS ACIDILACTICI IN TEMPERATURE ABUSED REFRIGERATED FOODS

The "Wisconsin process'(a combination of lactic acid starter culture and sucrose) has previously been shown to be effective in preventing botulinum toxigenesis in reduced nitrite bacon. This technology has been applied to other low-acid refrigerated foods which receive less than a 12D thermal process. A combination of Pediococcus acidilactici and dextrose was effective in preventing botulinum toxigenesis in chicken salad. When the chicken salad was temperature abused, the P. acidilactici catabolized available dextrose to lactic acid. Extracellular accumulation of the lactic acid caused a decrease in the pH of the product. Pathogen challenge tests verified that the rate and extent of lactic acid accumulation in the chicken salad during temperature abuse was sufficient to preclude botulinum toxigenesis. This technology has the potential to be of use in a variety of low-acid refrigerated foods.     

Whitening of sidelobe powers by pattern switching in radar array antenna

Presented here is a concept for nearly eliminating bias errors in reflectivity and velocity estimates due to power received through antenna sidelobes of pulse Doppler radars. The antenna pattern is switched from pulse to paise among specially designed patterns, with near identical main lobes, but with sidelobes having randomly distributed phases and amplitudes. The sidelobe signal then becomes incoherent without affecting the coherency of the main lobe signal. The whitened sidelobe signal does not bias the mean velocity estimate computed by Doppler processing, and an unbiased estimate of reflectivity can be computed with the knowledge of the mean whitened power level. Pattern design criteria and a method for the design of optimum patterns are developed for a linear array. The extent of sidelobe reduction by way of whitening has been studied in detail for special case of only two patterns switched randomly using a pseudonoise sequence. Pattern switching realizes an effectively low sidelobe pattern without sacrifice of main lobe resolution. A possible extension to two-dimensional arrays is suggested.     

New natural 2-acetoxy fatty acids using chemical ionization and electron impact mass spectrometry

The phospholipids of the spongePolymastia gleneni contain saturated long chain (C_22–30)-acetoxy fatty acids. Their structures were assigned based on chromatographic and spectrometric data as well as comparison with a synthetic sample. The use of capillary gas chromatography combined with chemical ionization and electron impact mass spectrometry was instrumental in the eludication of structures, since only a very small amount of crude lipids was available. Part 10 of “Phospholipids in Marine Organisms.” For Part 9 in this series, see reference 12.     

Flotation machine design: impeller—stator interaction

The separate contributions of impellers and stators to suction are studied by means of interaction models. From these, suction can be predicted when interchangeable components are used in any combination, and in either direction of impeller rotation. Methods are devised by which numerical values of the impeller and stator terms can be simply assigned. The resulting model provides good agreement with experiment. The influence of variability in component geometry is reflected in the model parameters. Possible applications of the model are suggested.     

A broad line n.m.r. study of oriented poly(vinylidene fluoride)

Broadline nuclear magnetic resonance measurements have been carried out for the proton resonance in oriented poly(vinylidene fluoride). The spectra in general show two component lines with distinctly different line widths. The broad component shows a high degree of molecular orientation and can be satisfactorily assigned to the crystalline regions of the polymer. The narrow component corresponds to an oriented non crystalline phase which is sufficiently constrained to allow motion about the chain axis only. An appreciable decrease in the value of the rigid mass fraction was observed in both of the samples over the temperature range examined. Our calculations indicate that this could play an important role in the temperature dependence of the pyroelectric response of this material.     

Effects of seat slope and hip flexion on spinal angles in sitting

Lumbar and thoracic spinal angles of 25 male and 25 female subjects were measured in four sitting postures, with standing angles used as reference. Subjects sat with either 90 deg or 65 deg of hip flexion on either flat or forward-sloping seats. Lumbar kyphosis was greatest when the flat seat/90-deg posture was adopted and least when the sloping seat/65-deg posture was adopted. The opposite was observed for the thoracic angles, and intermediate results were observed for the other two sitting postures. No statistically significant interactions were observed among seat slope, hip flexion, and subject sex. The findings are discussed with reference to the anatomy of sitting and factors influencing pelvic tilt and the implications for the ergonomic design of chairs.