Segregation in sputtered Co-Cr films

The segregation growth process in sputtered Co-Cr films is investigated by examining the effect of substrate temperature on the segregated microstructure and magnetic properties. In sputtered Co-25at%Cr films, segregation occurs below 560°C, and both the saturation magnetization and the perpendicular anisotropy constant show a maximum around a substrate temperature of 300°C, where a specific microstructure, called a CP (chrysanthemum-like pattern) structure, is observed. The results suggest that the CP structure becomes observable in the highly segregated state and generates high perpendicular anisotropy. A new segregation growth model is derived from the results of the CP structure observations. Using this model, it is possible to explain the continuous transition of the magnetization mode between the continuous and the particulate modes.     

Si/SiGe n-MODFETs on thin SiGe virtual substrates prepared by means of He implantation

Si/SiGe n-type modulation-doped field-effect transistors grown on a very thin strain-relieved Si/sub 0.69/Ge/sub 0.31/ buffer on top of a Si(100) substrate were fabricated and characterized. This novel type of virtual substrate has been created by means of a high dose He ion implantation localized beneath a 95-nm-thick pseudomorphic SiGe layer on Si followed by a strain relaxing annealing step at 850/spl deg/C. The layers were grown by molecular beam epitaxy. Electron mobilities of 1415 cm/sup 2//Vs and 5270 cm/sup 2//Vs were measured at room temperature and 77 K, respectively, at a sheet carrier density of about 3/spl times/10/sup 12//cm/sup 2/. The fabricated transistors with Pt-Schottky gates showed good dc characteristics with a drain current of 330 mA/mm and a transconductance of 200 mS/mm. Cutoff frequencies of f/sub t/=49 GHz and f/sub max/=95 GHz at 100 nm gate length were obtained which are quite close to the figures of merit of a control sample grown on a conventional, thick Si/sub 0.7/Ge/sub 0.3/ buffer.     

A new technique for on-line and off-line high speed computation

A novel technique for both online and offline computation is presented. With this technique, a reconstruction analysis in elementary particle physics, otherwise prohibitively long, has been accomplished. It will be used online in an upcoming Fermilab experiment to reconstruct more than 100000 events per second and to trigger on the basis of that information. The technique delivers 40 gigaoperations per second, has a bandwidth on the order of gigabytes per second, and has a modest cost. An overview of the program, details of the system, and performance measurements are presented     

Efficiency increase of an induction motor by improving coolingperformance

Improving the efficiency of induction motors, which are the most energy consuming electric machines in the world, saves much energy. The efficiency can be increased by improving cooling performance as well as by using better materials or by improving electromagnetic performance with better design. This paper presents the relationship between the efficiency or the losses and the temperature of coils with experiments as well as simulations by changing parameters such as the load and the flow rate of cooling air. The losses and the efficiency are calculated from an equivalent circuit method as well as experiments. Coil temperatures variation affects much on the efficiency. The internal cooling method is better than that of external cooling for the coil temperature reduction. Several cooling methods are compared focusing on the fan efficiency and performance, from which the values of the efficiencies of the motors are expected. The fan efficiency as well as the fan performance should be considered for the optimum fan design to increase the total efficiency of a motor. The simulations are validated by the comparison with the experiments