Transmit permission control on spread ALOHA packets in LEOsatellite systems

A transmit permission control method for improving the throughput characteristics of a low Earth orbit (LEO) satellite communication system employing spread-slotted ALOHA multiple-access scheme is proposed. Both nonfading and fading satellite links are considered. The basic idea of the proposed scheme is to decrease the level of interference at each satellite and, hence, to increase the probability of packet success, by prohibiting the packet transmission from the users with relatively high propagation loss to their connecting satellites. It is shown that the method has the ability to improve the throughput performance in heavy traffic loads and the peak value of the throughput, significantly. It is also shown that the average delay performance of the system employing the proposed scheme is superior to that of the conventional system at heavy traffic loads     

The effect of bandwidth allocation policies on delay inunidirectional bus networks

We consider the problem of allocating bandwidth fairly to each node in a shared, unidirectional bus network. We focus on the p_i persistent protocol, since these are open loop policies designed to operate well in high speed networks, which have a very large bandwidth-delay product and feedback in the upstream direction is not available in a timely manner. First, we introduce an improvement to the basic p_i persistent protocol, in which we replace random coin tosses with a deterministic counting algorithm, and thereby reduce the delays for all nodes for any given choice of {p_i}. We then describe an exact method for calculating average packet delays and queue lengths in both the p_i persistent and our new deterministic n out of m protocols, based on the regenerative approach of Georgiades et al. (1987). These delay results, together with simulation measurements, show that both of these protocols still waste some bandwidth. After presenting a lower bounding argument to show that some wasted bandwidth is inevitable in all such distributed access control schemes, assuming a passive bus without feedback in the upstream direction, we show that changing the bus to unidirectional point-to-point links between (very simple) active interfaces at each node allows us to construct distributed access schemes that require no upstream feedback and are both work conserving and fair. To illustrate how this can be done, we introduce the p_i preemptive protocol, in which each node randomly inserts its own packets into the traffic arriving from upstream. We derive a simple and effective heuristic for calculating the preemption probability for each node, and use simulation to show how well it equalizes the delays at each node     

Movement stability analysis of a pipe string in a thixotropic fluid

Features of movement of a drill pipe string in a well filled with a thixotropic fluid are analyzed taking into account inertial and elastic forces of the rope system. It is shown that processes of fluid structure degradation can lead to nonstationary movement of the pipes. In this case periodic and chaotic auto-oscillations are excited in the system.Bashkir State University, Ufa, Russia. Translated from Inzhenerno-Fizicheskii Zhurnal, Vol. 66, No. 4, pp. 405–411, April, 1994.     

EFFECT OF STORAGE ON THE RHEOLOGICAL BEHAVIOUR OF BABY FOODS

The effect of storage temperature on rheological behaviour of four varieties of baby foods was studied. After 24-month storage at 15C and 25C, the constant A in Weltman model increased significantly for the vegetables, meat and fish samples, and decreased significantly for the fruit samples. After 24-month storage at 5C and 15C there were no significant changes in flow behavior index, consistency index and yield stress of the Herschel-Bulkley model for the vegetables, meat, fish and fruit samples. Increase in storage temperature decreased the consistency index and yield stress of the fruit samples.     

NMR IMAGING, CALORIMETRIC, and MATHEMATICAL MODELING STUDIES of FOOD FREEZING

Nuclear magnetic resonance imaging (MRI), calorimetry, and temperature measurements were used to monitor cylindrical potato sections frozen at -11C and -42C. MRI showed the advance of the nonsymmetric freezing zone and loss of signal intensity as liquid water turned to ice. Differential calorimetry was used to follow heat removal during transient freezing. Measured times to 95% enthalpy change were 24 min (-42C) and 49 min (-11C), as compared to modeled values of 29 min (-42C) and 100 min (-11C). Times to 95% change in the NMR signal, integrated over the area of the image, were 21 min (-42C) and 56 min (-11C). Changes in NMR signal intensity could be correlated with the amount of unfrozen water remaining after a steady-state had been reached. At -42C, NMR indicated 25% unfrozen water remaining as compared to 26% by calorimetry, and 22% by modeling. At -11C, NMR measured 67% unfrozen water remaining as compared to 48% by calorimetry, and 25% by equilibrium modeling.     

Antibacterial activity of sourdough lactic acid bacteria: isolation of a bacteriocin-like inhibitory substance fromLactobacillus sanfranciscoC57

A total of 232 strains from nine species ofLactobacillusisolated from sourdoughs were screened for antagonistic activity against sourdough-related micro-organisms. Seventy-seven strains on agar medium and 52 in culture supernatants, re-adjusted to pH 6.5 and catalase-treated, showed antagonistic activity. The activities were species and strain specific showing different spectra of inhibition against sourdough lactobacilli. All the strains were inhibitory toBacillus subtilisbut not against sourdough yeasts and moulds.Lactobacillus sanfranciscoandLactobacillus plantarumstrains had the largest inhibitory spectrum. All the antimicrobial compounds produced from strains of different species contained a protein moiety and were differently sensitive to different proteinases. A bacteriocin-like inhibitory substance, which was heat-stable (100°C for 20 min), insensitive to lipase and α-amylase, of a protein nature, with an inhibitory spectrum centred about lactic acid bacteria and a bactericidal or bacteriolytic mode of action was isolated fromLb. sanfranciscoC57. The antimicrobial substance also inhibitedListeria monocytogenes, and was mainly produced in the stationary phase of growth and at pH 4.0–5.0.Lb. sanfranciscoC57 variants, which did not contain the nativec. 17 kbp plasmid, maintained their antagonistic activity, therefore, the gene encoding for the bacteriocin-like inhibitory substance fromLb. sanfranciscoC57 is chromosomally located.     

Camcorders

The author explains from an engineering standpoint, how some of the camcorder components work. He discusses the solid-state image sensor, the photodetector, scanning, the shutter frame rate, optics, the recording mechanism, the viewfinder, special effects, and automatic features. Motion detection, discrimination, and compensation are also covered. Recommendations as to which features are most useful are made     

Transformer modelling for distribution system studies. II. Additionof models to YBUS and ZBUS

For pt.I see ibid., vol.7, no.2, p.567-74 (1992). A distribution transformer modeling procedure is discussed which represents the distribution transformer with a minimum of input data for network, load, and fault studies thereby allowing the transformer to be routinely included as part of the distribution network. How these transformer methods are used in the formation of Y_BUS and Z _BUS system models is described     

Power engineering industry interaction at Clemson University

The authors present a successful model of industry/university cooperation in establishing a strong power system curriculum in both the graduate and undergraduate level. Numerous long-term and short-term research projects have been developed to satisfy the university mission and to tackle challenging problems facing the power industry. A unique structure for the Clemson University Electric Power Research Association (CUEPRA) has been established to promote electric power system research and to meet the need for a working communication link between the power industry and the academic community. The power industries involvements in the power program at Clemson University and the strategic improvements that have been accomplished in research and education are outlined