Land use regression model for ultrafine particles in Amsterdam

There are currently no epidemiological studies on health effects of long-term exposure to ultrafine particles (UFP), largely because data on spatial exposure contrasts for UFP is lacking. The objective of this study was to develop a land use regression (LUR) model for UFP in the city of Amsterdam. Total particle number concentrations (PNC), PM10, PM2.5, and its soot content were measured directly outside 50 homes spread over the city of Amsterdam. Each home was measured during one week. Continuous measurements at a central urban background site were used to adjust the average concentration for temporal variation. Predictor variables (traffic, address density, land use) were obtained using geographic information systems. A model including the product of traffic intensity and the inverse distance to the nearest road squared, address density, and location near the port explained 67% of the variability in measured PNC. LUR models for PM2.5, soot, and coarse particles (PM10, PM2.5) explained 57%, 76%, and 37% of the variability in measured concentrations. Predictions from the PNC model correlated highly with predictions from LUR models for PM2.5, soot, and coarse particles. A LUR model for PNC has been developed, with similar validity as previous models for more commonly measured pollutants.     

Proxies and measurement techniques for mineral dust in Antarctic ice cores

To improve quantitative interpretation of ice core aeolian dust records, a systematic methodological comparison was made. This involved methods for water-insoluble particle counting (Coulter counter and laser-sensing particle detector), soluble ion analysis (ion chromatography and continuous flow analysis), elemental analysis (inductively coupled plasma mass spectroscopy at pH 1 and after full acid digestion), and water-insoluble elemental analysis (proton induced X-ray emission). Antarctic ice core samples covering the last deglaciation from the EPICA Dome C (EDC) and the EPICA Dronning Maud Land (EDML) cores were used. All methods correlate very well among each other, but the ratios of glacial age to Holocene concentrations, which are typically a factor approximately 100, differ between the methods by up to a factor of 2 with insoluble particles showing the largest variability. The recovery of ICP-MS measurements depends on the digestion method and is differentfor different elements and during different climatic periods. EDC and EDML samples have similar dust composition, which suggests a common dust source or a common mixture of sources for the two sites. The analyzed samples further reveal a change of dust composition during the last deglaciation.     

The impact of endocrine disruptors on oocyte competence

To date, approximately 60 chemicals have been identified as endocrine disruptors: exogenous agents that interfere with various aspects of natural hormone physiology. The potential reproductive and health hazards of these environmental chemicals have recently generated concern among the scientific community, policy makers and general public. The present review presents and discusses the available evidence that environmental chemicals are causing ovarian toxicity in various species, with particular attention to farm animals. The impact of chronic exposure to endocrine disruptors via food and drinking water cannot be neglected when studying fertility problems in these species. This review focuses attention on the superfamily of organochlorine chemicals, persistent organic pollutants (POPs), because of their persistence in the environment, ability to concentrate up the food chain, continued detection in environmental matrices and ability to be stored in the adipose tissue of animals and humans. Published data clearly indicate that POPs disrupt mammalian oocyte maturation and follicle physiology in every species studied so far, including farm animals. However, as most of the data available still derive from experiments performed on laboratory species or in vitro models, great care should be taken when extrapolations to other species or environmental situations are attempted.     

Rapid differentiation of new apple cultivars by headspace solid‐phase microextraction in combination with chemometrical data processing

The aim of this study was to test a combination of automated headspace solid phase‐microextraction gas chromatography (GC) with chemometrical data treatment for the rapid differentiation of enzyme‐inactivated homogenates of new apple cultivars. The four cultivars Pinova, Piflora, Renora and Florina are characterized by different volatile patterns. Differences in the contents of volatiles were especially found for butyl acetate, ethyl butanoate, 2‐methyl butanol, ethyl acetate and 6‐methyl‐5‐hepten‐2‐ol. The used sample preparation method for GC coupled with pattern recognition of chromatograms is a useful tool for rapid and reliable determination of large numbers of samples.     

Microbiological contamination of pig and cattle carcasses in different small-scale Swiss abattoirs

A total of 750 pig carcasses and 535 cattle carcasses from 17 small-scale abattoirs were sampled by excision at four sites (pig: neck, belly, back, ham; cattle: neck, brisket, flank, rump). Samples were examined for total viable counts (TVC) and Enterobacteriaceae. Mean TVCs ranged from 2.4 to 4.2 log(10)CFUcm(-2) on pig carcasses and from 2.7 to 3.8 log(10)CFUcm(-2) on cattle carcasses. With regard to EU Regulation (EC) No 2073/2005, TVCs were mainly considered satisfactory (pig: 81.3%; cattle: 71.4%). Amongst sites, the back (pigs) and neck (cattle) tended to yield higher TVCs. Enterobacteriaceae were detected in low counts on 23.9% of pig carcasses and 21.7% of cattle carcasses. Amongst abattoirs, Enterobacteriaceae prevalence on pig and cattle carcasses ranged from 2.0% to 56.0% and from 0.0% to 55.0%, respectively. Consequently, criteria of the EU Regulation proved to be a suitable tool for the appraisal of microbiological results (TVCs) from pig and cattle carcasses from small-scale abattoirs. Because the occurrence of Enterobacteriaceae on carcasses was too infrequent to ensure log normality, frequencies should be compared for these organisms.     

The development of poly(vinyl chloride) extrusions for a 14,000‐ton self‐supporting structure for the detection of neutrinos

The NOvA Neutrino Experiment has built a one‐of‐a‐kind self‐supporting plastic structure, potentially the largest ever built. The poly(vinyl chloride) (PVC) structure serves as a neutrino detector and is composed of 28 individual blocks that measure 15.5 m (51 feet) high by 15.5 m (51 feet) wide by 2.1 m (7 feet) deep. The primary parts in the detector construction are 15.5‐m (51‐foot), 16‐cell PVC extrusions. These extrusions form the basis of the detector modules, which are laminated together in a crossed pattern to form the individual blocks and then filled with (mineral oil)–based liquid scintillator. The self‐supporting nature of the detector places important structural requirements on both the PVC formulation and the extrusions. Block assembly requirements impose narrow geometric tolerances. Because of the method of detecting neutrinos, the extrusions must possess exceptionally high reflectivity over a particular wavelength range. This requirement places additional restrictions on the components of the PVC formulation. Altogether, the PVC extrusions have to maintain important reflectivity characteristics, provide structural support to the detector, and meet relatively tight geometric requirements for assembly. In order to meet these constraints, a custom PVC formulation had to be created and extruded. We describe the purpose and requirements of the NOvA detector leading to the production of our unique PVC extrusion, summarize the research and development process, and discuss the lessons learned. J. VINYL ADDIT. TECHNOL., 22:368–376, 2016. © 2014 Society of Plastics Engineers     

Laser direct writing of β-Co/Ga and Mn/Ga alloy microstructures from organometallic single-source precursors

β-Co/Ga and Mn/Ga alloys have been deposited on various substrates by laser direct write chemical vapour deposition (LCVD) from novel single-source precursors. The preformed alloy stoichiometry of 1:1 defined by the metal ratio of the precursors, (CO)₄Co-GaEt₂(NMe₃) (1) and (CO)₅Mn-GaEt₂(NMe₃) (2), is retained within the deposited structures. The depositions were up to 1.5 μm thick and the lateral dimension (4 μm) was determined by the diameter of the laser focus. The deposited structures were contaminated with ∼10 at. % C and O (by AES).     

Hartstoffauflösung und Gefügeausbildung bei der konvektionsarmen Erzeugung von Hartstoff-Dispersionsschichten auf Stahl mittels Laserstrahlung

Hard Particle Dissolution and Structure of Coarsegrained Dispersion Layers on Steel Produced by Convection-reduced Laser Melting With the aim to produce hard and wear-resistant dispersion layers coarse grained TiC-and TiB₂-particles were incorporated into the surface layers of steels by means of a two-step laser melting process with reduced melt bath convection. The influence of the carbon conent of the steel and content of alloying elements and hard particles in the screen printed layer on solidification structures and particle dissolution was investigated by optical and electron microscopy and x-ray microanalysis. The produced layers were also characterized by hardness measurements.