Thermal behavior of mullite between 4 K and 1320 K

The evolution of metric parameters of 2:1 and 3:2 mullites have been measured between 4 K and 1320 K using neutron and X‐ray powder diffraction. Negative thermal expansion was observed at low temperature for the a‐cell parameter and consequently for the cell‐volume, which is more pronounced for 2:1 mullite than those for 3:2 mullite. Each parameter is simulated using Grüneisen first‐order approximation for the zero pressure equation of state at 0 K, where the vibrational energy was calculated using microscopic approach. While the b‐ and c‐cell parameters require only one Debye term, a second Debye spectrum with negative Grüneisen parameter was required to fit the a‐cell parameter as well as the cell volume. At 4 K, 300 K and 1320 K the model, respectively, calculates the volume thermal expansion coefficients of 0.09x10^?6 K^?1, 9x10^?6 K^?1, and 17.3x10^?6 K^?1 for 2:1 mullite, and 0.09x10^?6 K^?1, 8.7x10^?6 K^?1, and 17.3x10^?6 K^?1 for 3:2 mullite. Temperature‐dependent Raman spectra and phonon density of states hint for the possible microscopic sources of the cell contraction at low temperature. A simple polynomial approach is presented to calculate the elastic stiffness coefficients of the 3:2 mullite, which are not available from experiments.     

Development of low‐shrinkage composites based on novel crosslinking vinylcyclopropanes

Polymerization shrinkage of methacrylate‐based dental composites remains a major concern in restorative dentistry. Cyclic monomers that undergo ring‐opening polymerization are known to exhibit reduced polymerization shrinkage compared to methacrylates. In this article, the synthesis of four crosslinking 1,1‐disubstituted 2‐vinylcyclopropanes bearing rigid spacers is described. These monomers were synthesized by esterification of 1‐ethoxycarbonyl‐2‐vinylcyclopropane‐1‐carboxylic acid with the corresponding diols. The photopolymerization kinetics of these monomers was investigated by photo‐differential scanning calorimeter using bis(4‐methoxybenzoyl)diethylgermane as the photoinitiator. The synthesized vinylcyclopropanes (VCPs) were shown to be more reactive than the frequently used reactive diluent triethylene glycol dimethacrylate. Composites based on these VCPs showed good mechanical properties and exhibited a significantly reduced volumetric shrinkage and shrinkage stress compared to a corresponding dimethacrylate‐based restorative material. This work highlights the excellent potential of VCPs as alternatives to methacrylates in the development of low‐shrinkage dental composites. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45577.     

Controlling Cellular Uptake and Toxicity of Polyphenylene Dendrimers by Chemical Functionalization

Polyphenylene dendrimers (PPDs) represent a unique class of macromolecules based on their monodisperse and shape‐persistent nature. These characteristics have enabled the synthesis of a new genre of “patched” surface dendrimers, where their exterior can be functionalized with a variety of polar and nonpolar substituents to yield lipophilic binding sites in a site‐specific way. Although such materials are capable of complexing biologically relevant molecules, show high cellular uptake in various cell lines, and low to no toxicity, there is minimal understanding of the driving forces to these characteristics. We investigated whether it is the specific chemical functionalities, relative quantities of each moiety, or the “patched” surface patterning on the dendrimers that more significantly influences their behavior in biological media.     

Stated preference models of contact decision behavior in academia

A general framework is presented for communication behavior where contact decisions play an important role. The contact decision component of the conceptual framework is analyzed in detail and empirically tested using stated preference models of contact decision behavior. Face-to-face interviews were conducted in six universities representing classical schools, business schools, and technological schools in Austria and Switzerland. The empirical results indicate the importance of the contact decision context variables in general, and in particular the perceived attractiveness of specific contact places in different cultural regions, cost, and language skills of the potential contact partner.     

Spatial variation in nitrogen dioxide in three European areas

In order to estimate the spatial variation within well-defined study areas, nitrogen dioxide was measured with diffusion samplers (Palmes tube) in 40-42 sites each in Germany (Munich), the Netherlands and Sweden (Stockholm County). Each site was measured over four 2-week periods during 1 year (spring 1999 to summer 2000). In each country, one reference site was measured during all periods and the results were used to adjust for seasonal variability, to improve the estimates of the annual average. Comparisons between the chemiluminescence method (European reference method) and Palmes tube measurement indicated a good agreement in Germany (with a ratio of 1.0 for Palmes tube/chemiluminescence) but underestimation for Palmes tube measurement in the Netherlands and Sweden (0.8 for both countries). The r2 values were between 0.86 and 0.90 for all three countries. The annual average values for NO2 for different sampling sites were between 15.9 and 50.6 (mean 28.8 microg/m3) in Germany, between 12.1 and 50.8 (mean 28.9 microg/m3) in the Netherlands and between 6.1 and 44.7 (mean 18.5 microg/m3) in Sweden. Comparing spatial variation between similar sites in the three countries, we did not find any significant differences between annual average levels for urban traffic sites. In Sweden, annual average levels in urban background and suburban backgrounds sites were about 8 microg/m3 lower than comparable sites in Germany and the Netherlands. Comparing site types within each country only urban traffic sites and suburban background sites differed in Germany. In the Netherlands and Sweden, the urban traffic sites differed from all other sites and in Sweden also the urban background sites differed from the other background sites. The observed contribution from local traffic was similar in the Netherlands and Sweden (10 and 8 microg/m3, corresponding to 26-27% of the NO2 concentration found in the urban traffic sites). In Germany, the contribution from local traffic was only 3 microg/m3, corresponding to 9% of the NO2 concentration found in the urban traffic sites. The spatial variation was substantially larger for NO2 than the variation for PM2.5 and similar to PM2.5 absorbance, measured in the same locations.     

Quantitative analysis of workflow, temporary structure usage, and productivity using 4D models

This paper presents time–space analyses of construction operations supported by quantitative information extracted from 4D CAD models. The application of 4D models is a promising approach to help introduce construction innovations and to evaluate construction alternatives. Current analyses of 4D models are mainly visual and provide project stakeholders with a clear, but limited, insight of construction planning information. This practice does not take advantage of the quantitative data contained in 4D models. We use two 4D models of an industry test case to illustrate how to analyze, compare, and present 4D content quantitatively (i.e., workspace areas, work locations, and distances between concurrent activities). This paper shows how different types of 4D content can be extracted from 4D models to support 4D-content-based analyses and novel presentation of construction planning information. We suggest further research aimed at formalizing the contents in 4D models to enable comparative quantitative analyses of construction planning alternatives. Formalized 4D content can enable the development of reasoning mechanisms that automate 4D-model-based analyses and provide the data content for presentations of construction planning information.     

CFT30-用于6缸FWD车辆的链式CVT

CFT30是第一种将链传动应用于前置（横置）前驱、并配备有提高起步性能的变矩器的CVT。变速器能够传递现代6缸发动机310Nm的转矩。它采用全电子控制,比目前常用的4速自动变速器及刚开发出来的6速自动变速器性能更好、油耗更低。完美的换档感觉提高了驾驶舒适性。本文介绍了变速器系统、设计和主要部件。对CFT30如何解决燃油经济性、性能和舒适性作了详细的解释。同时给出了重要的部件试验和车辆试验结果。     

Plasmon‐Induced Sub‐Bandgap Photodetection with Organic Schottky Diodes

Organic materials for near‐infrared (NIR) photodetection are in the focus for developing organic optical‐sensing devices. The choice of materials for bulk‐type organic photodetectors is limited due to effects like high nonradiative recombination rates for low‐gap materials. Here, an organic Schottky barrier photodetector with an integrated plasmonic nanohole electrode is proposed, enabling structure‐dependent, sub‐bandgap photodetection in the NIR. Photons are detected via internal photoemission (IPE) process over a metal/organic semiconductor Schottky barrier. The efficiency of IPE is improved by exciting localized surface plasmon resonances, which are further enhanced by coupling to an out‐of‐plane Fabry–Pérot cavity within the metal/organic/metal device configuration. The device allows large on/off ratio (>1000) and the selective control of individual pixels by modulating the Schottky barrier height. The concept opens up new design and application possibilities for organic NIR photodetectors.     

Polariton condensate coherence in planar microcavities in a magnetic field

In planar GaAs microcavities in a magnetic field up to 5 T perpendicular to the structure growth plane, under conditions of resonant pulsed pumping to a point close to the inflection point of the lower dispersion curve, Zeeman splitting of the spin sublevels of the polariton condensate is observed. This is accompanied by a significant change in the degree of circular polarization and the second-order correlator g²(0). It is found that the correlator is different for the spin sublevels of the polariton condensate, split in a magnetic field. In particular, correlator measurements indicate different condensation thresholds for the spin sublevels. The correlator values initially differing in terms of the absence of a field increase, reach a maximum, and then decrease and become equal for different polarizations in a field of 5 T.     

Uncertainty budget for a whole body counter in the scan geometry and computer simulation of the calibration phantoms

At the Austrian Research Centers Seibersdorf (ARCS), a whole body counter (WBC) in the scan geometry is used to perform routine measurements for the determination of radioactive intake of workers. The calibration of the WBC is made using bottle phantoms with a homogeneous activity distribution. The same calibration procedures have been simulated using Monte Carlo N-Particle (MCNP) code and FLUKA and the results of the full energy peak efficiencies for eight energies and five phantoms have been compared with the experimental results. The deviation between experiment and simulation results is within 10%. Furthermore, uncertainty budget evaluations have been performed to find out which parameters make substantial contributions to these differences. Therefore, statistical errors of the Monte Carlo simulation, uncertainties in the cross section tables and differences due to geometrical considerations have been taken into account. Comparisons between these results and the one with inhomogeneous distribution, for which the activity is concentrated only in certain parts of the body (such as head, lung, arms and legs), have been performed. The maximum deviation of 43% from the homogeneous case has been found when the activity is concentrated on the arms.