Evaporated Te on CdTe: A vacuum-compatible approach to making back contact to CdTe solar cell devices

A commonly used process for forming low-resistance contacts to thin-film p-type CdTe involves the formation of a Te layer by etching the CdTe film in a concentrated mixture of nitric and phosphoric acids. The authors compare evaporated Te back contacts with ‘control’ back contacts formed by the usual etching process, and demonstrate that evaporating Te onto a CdTe thin film is a viable process for forming a low-resistance contact. The best efficiency achieved for a CdTe solar cell made with an evaporated Te back contact is 12.1%, whereas the efficiency of the device made with the control back contact was 11.9%. The evaporation process offers numerous advantages over acid etching, most notably vacuum compatibility amenable to large-scale production of CdTe solar cell modules.     

Analysis of Salmonella serotypes from selected carcasses and raw ground products sampled prior to implementation of the Pathogen Reduction; Hazard Analysis and Critical Control Point Final Rule in the US

In July 1996, the US Department of Agriculture (USDA), Food Safety and Inspection Service (FSIS), published the Pathogen Reduction; Hazard Analysis and Critical Control Point (HACCP) Systems final rule to improve food safety of meat and poultry products. The final rule established, among other requirements, pathogen reduction performance standards for Salmonella for food animal carcasses and raw ground products. The final rule is to be fully implemented in three stages in successively smaller federally inspected meat and poultry slaughter and processing establishments. Implementation began in January 1998 and was completed in January 2000. Samples of carcasses of four species of food animals (cattle, swine, chickens, turkeys), and raw ground product from each of these species, were collected by FSIS from establishments prior to implementation of the final rule and cultured for Salmonella. This paper reports Salmonella serotype results of samples collected from June 1997 through August 1998. These results represent a baseline for future comparisons.     

A fracture criterion for nuclear graphite

Measurements of tensile and flexural strength of a nuclear graphite using small bar specimens are reported. A theoretical model of failure is described in which critical defects are assumed to be associated with cleaved large coke particles. It is further assumed that these subcritical cracks can only extend by the cleavage of small particles which surround them. The size of the critical flaws is defined on the basis of linear elastic fracture mechanics. The model predicts the observed variation in flexural strength in three- and four-point bending as the knife edge spacings are varied. It slightly overestimates the observed ratio of tensile-to-bend strength, and this is thought to be due to some of the simplifying assumptions made in the models formulation. The potential of the model for use in engineering applications is discussed.     

Radon and moisture impacts from interventions integrated with housing energy retrofits

Energy retrofits can reduce air exchange, raising the concern of whether indoor radon and moisture levels could increase. This pre/post-intervention study explored whether simple radon interventions implemented in conjunction with energy retrofits can prevent increases in radon and moisture levels. Treatment homes (n = 98) were matched with control (no energy retrofits or radon intervention) homes (n = 12). Control homes were matched by geographic location and foundation type. t-tests were used to determine whether post-energy retrofit radon and moisture level changes in treatment homes significantly differed from those in control homes. The radon interventions succeeded in preventing statistically significant increases in first floor radon using arithmetic (p = 0.749) and geometric means (p = 0.120). In basements, arithmetic (p = 0.060) and geometric (p = 0.092) mean radon levels statistically significantly increased, consistent with previous studies which found that basement radon levels may increase even if first floor levels remain unchanged. Changes in infiltration were related to changes in radon (p = 0.057 in basements; p = 0.066 on first floors). Only 58% of the change in infiltration was due to air sealing, with the rest due to weather changes. There was no statistically significant association between air sealing itself and radon levels on the first floor (p = 0.664). Moisture levels also did not significantly increase.     

Making the invisible visible: Fear and disclosure of sexual orientation at work.

Stigma theory was used to examine the fears underlying the disclosure of a gay identity at work. Using a national sample of 534 gay, lesbian, and bisexual employees, this study examined the antecedents that affect the degree of disclosure of a gay identity at work and, for those who had not disclosed, the factors that influence their fears about full disclosure. Employees reported less fear and more disclosure when they worked in a group that was perceived as supportive and sharing their stigma. Perceptions of past experience with sexual orientation discrimination were related to increased fears but to greater disclosure. For those who had not fully disclosed their stigma, the fears associated with disclosure predicted job attitudes, psychological strain, work environment, and career outcomes. However, actual disclosure was unrelated to these variables. The utility of fear of disclosure for understanding processes underlying the disclosure of gay and other invisible stigmatized identities in the workplace is discussed. (PsycINFO Database Record (c) 2011 APA, all rights reserved)     

Distribution of abnormal karyotypes among malformed fetuses detected by ultrasound throughout gestation

The participation of sarcoplasmic reticulum Ca2+ release channels in the activation of Ca(2+)-sensitive K+ currents (IK(Ca)) by cyclic dibutyryl GMP was investigated in smooth muscle cells from the circular layer of guinea-pig gastric fundus. All experiments were performed in the presence of 3 microM nicardipine into the bath and low Ca2+ buffering capacity of the pipette-filling solution (pCa 7.4). Ruthenium red (10 microM) as well as its combination with 10 microM heparin abolished the cyclic GMP-induced activation of IK(Ca), while 10 microM heparin remained ineffective. Ryanodine (10 microM) and the subsequently added 1 microM thapsigargin induced a relatively small increase in IK(Ca) amplitudes. The addition of 10 microM ryanodine to 1 microM thapsigargin-containing bath solution caused a vast increase in IK(Ca). It is hypothesyzed that protein kinase G-induced vectorial Ca2+ flux from the cell bulk and sarcoplasmic reticulum Ca2+ stores toward the plasma membrane is realized by a spontaneous Ca(2+)-induced Ca2+ release from a superficially situated Ca2+ store.     

Mechanism of Rab geranylgeranylation: formation of the catalytic ternary complex

Rab proteins are geranylgeranylated on one or two C-terminal cysteines by Rab geranylgeranyl transferase (RabGGTase). The reaction is dependent on a Rab-binding protein, termed Rab escort protein (REP). Here, we studied the role of REP in the geranylgeranylation reaction. We first characterized the interaction between REP and ungeranylgeranylated Rab using analytical ultracentrifugation and a fluorescence-based assay. We measured an equilibrium dissociation constant of 0.2 microM for the formation of a 1:1 REP-Rab complex and showed that this interaction relies mostly on ionic bonds and does not involve the two C-terminal cysteine residues. Second, we show that REP is required for recognition of Rab by RabGGTase and therefore that the REP-Rab complex is the true substrate for RabGGTase. Third, we show that free REP inhibits the geranylgeranylation reaction, suggesting that the complex is recognized by RabGGTase primarily via a REP-binding site. Our data suggest a model whereby REP behaves kinetically as an essential activator of the reaction.