Reactivity of LaNi1−y Co y O3−δ Perovskite Systems in the Deep Oxidation of Toluene

In the present work we have evaluated the oxidation of toluene over different lanthanum perovskites with a general composition of LaNi_1?y Co _y O_3?δ. These catalysts, prepared by a spray pyrolysis method, have been characterised by XRD, BET and FE-SEM techniques. Additional experiments of temperature programmed desorption of O₂, reduction in H₂ and X-ray absorption spectroscopy were also performed in order to identify the main surface oxygen species and the reducibility of the different perovskites. The catalytic behaviour toward the oxidation of toluene (as a model for VOCs compounds) was evaluated in the range 100–600 °C, detecting a total conversion for all the samples below 400 °C and higher activities for the cobalt-containing perovskites. The catalytic behaviour of these samples is consistent with a suprafacial mechanism, with the α-type oxygen playing an active role in the oxidation reaction.     

The system Clinker–MgO–CaZrO3 and its application to the corrosion behavior of CaZrO3/MgO refractory matrix by clinker

Phase relations in the clinker-rich region and the limits between the different stability fields of the isothermal section Clinker (CK)–MgO–CaZrO₃ at 1500 °C were experimentally established. The corrosion behavior by clinker of Portland cement of a CaZrO₃-rich/MgO refractory matrix obtained from both natural and synthetic raw materials were also studied. The attack mechanism to CaZrO₃-rich substrates was discussed in terms of microstructural features of the refractory matrix and the information supplied by the isothermal section Clinker–MgO–CaZrO₃ at 1500 °C.     

Loss of heterozygosity and overexpression of the p53 gene in ovarian carcinoma

Eight anticonvulsant drugs-including clonazepam, diazepam and phenobarbital-were tested for their effects on GABA-stimulated chloride uptake in rat cerebral cortical microsacs (unfiltered synaptoneurosomes). "Mid" and "high" therapeutic concentrations were screened, and, if significant enhancement was found, full concentration-response tests were done. In the initial screens, enhancement of GABA-stimulated uptake was found only with phenobarbital, clonazepam and diazepam. In subsequent concentration-response tests, the effects of phenobarbital were found to occur throughout the range of normal, anticonvulsant concentrations, whereas the effects of clonazepam and diazepam were observed only above the concentrations normally used for the chronic control of seizures or anxiety. These data suggest that phenobarbital's anticonvulsant effects are mediated via the GABAA receptor complex, but that the low-dose effects of the benzodiazepines may be mediated via some other mechanism.     

Boundary layer drug delivery using a helical catheter

BACKGROUND: A catheter-based approach for local endovascular drug delivery has been developed. The catheter is deployed percutaneously, while the end of the catheter is in the form of a helix that is placed just proximal to the vascular site to be treated. The helices are in contact with the vessel wall. A number of small holes is drilled in the coils of the catheter through which drug is infused, so that the infused drug remains within the blood fluid 'boundary layer' adjacent to the vessel wall. This approach is expected to be highly efficient for administration of antithrombotic and antiproliferative agents that target processes leading to vascular occlusion, heart attacks, and strokes. METHODS: The helical catheter was qualitatively evaluated using optical dye density measurements of Evans blue dye infused using an in vitro steady flow system under a physiologic range of conditions. To further demonstrate the efficiency of the technique, its capacity to inhibit thrombosis was evaluated in a baboon thrombosis model. The catheter was inserted into a femoral arteriovenous shunt (blood flow rate = 100 ml/min) and placed proximal to a segment of highly thrombogenic Dacron vascular graft (4.0 mm i.d.). Integrelin (an inhibitor of platelet glycoprotein IIb/IIIa; doses: 0.25-1.0 microg/min) and hirudin (an antithrombin; doses: 10-100 microg/min) were used to inhibit thrombus formation. RESULTS: Experimental flow visualization studies demonstrated that high concentrations of the infused Evans blue dye were retained near the vessel wall. In the animal experiments, platelet deposition on the Dacron graft surface was reduced by 82-97% (Integrelin) and 68-92% (hirudin) over 1-2 h of blood exposure. The local antithrombotic effects produced were found to be 200-fold and 30-fold more efficient than systemic administration of the same agents. CONCLUSIONS: Local drug infusion using the helical catheter approach can achieve high drug concentration levels at target sites, may avoid systemic effects, and can reduce cost of therapy by reducing total drug requirements.     

Vaccine genotype and route of administration affect pseudorabies field virus latency load after challenge

The influence of vaccine genotype and route of administration on the efficacy of pseudorabies virus (PRV) vaccines against virulent PRV challenge was evaluated in a controlled experiment using five genotypically distinct modified live vaccines (MLVs) for PRV. Several of these MLVs share deletions in specific genes, however, each has its deletion in a different locus within that gene. Pigs were vaccinated with each vaccine, either via the intramuscular or intranasal route, and subsequently challenged with a highly virulent PRV field strain. During a 2-week period following challenge with virulent PRV, each of the vaccine strains used in this study was evaluated for its effectiveness in the reduction of clinical signs, prevention of growth retardation and virulent virus shedding. One month after challenge, tissues were collected and analyzed for virulent PRV latency load by a recently developed method for the electrochemiluminescent quantitation of latent herpesvirus DNA in animal tissues after PCR amplification. It was determined that all vaccination protocols provided protection against clinical signs resulting from field virus challenge and reduced both field virus shedding and latency load after field virus challenge. Our results indicated that vaccine efficacy was significantly influenced by the modified live vaccine strain and route of administration. Compared to unvaccinated pigs, vaccination reduced field virus latency load in trigeminal ganglia, but significant differences were found between vaccines and routes of administration. We conclude that vaccine genotype plays a role in the effectiveness of PRV MLVs.     

Structure of continuously cooled low-carbon vanadium steels

The structures of four 0.15 pct carbon steels containing vanadium, nitrogen, and aluminum separately and together were studied systematically, with the help of transmission electron microscopy, by cooling suitable steels at four different rates ranging from 120 °C/min to 3.6 °C/ min from temperatures giving a common austenite grain size of 35 μm. Except for the steel containing only vanadium and that containing only aluminum and nitrogen cooled at the fastest rate used, the observed microstructures were all essentially mixtures of polygonal ferrite and expected amounts for pearlite. For all the steels studied, except the one containing aluminum and nitrogen, it was found that general precipitation was more common than interphase precipitation, although the extent of the latter increased at lower cooling rates. Moreover, in some cases, both general and interphase precipitation were present in the same area. The presence of aluminum was observed to enhance the formation of interphase precipitates at all cooling rates, and the spacing between parallel rows of precipitates increased as the cooling rate was decreased. The dislocation density was high at all cooling rates in all the steels, but it was found to decrease with decreasing cooling rates. Very fine precipitates were found in all the steels, except the steel containing aluminum and nitrogen. At the fast cooling rates, the segregation of vanadium and interstitial elements, which led to locally lower transformation temperatures and higher supersaturations, resulted in clusters of fine particles of vanadium carbonitride, V(C, N). At the slower cooling rates, all the steels showed severe heterogeneity in precipitate morphology which was more pronounced in the steel containing aluminum and nitrogen, while a needlelike morphology of V(C, N) precipitate was occasionally found in steels containing either vanadium and nitrogen or vanadium, nitrogen, and aluminum. As the cooling rate decreased, particle coarsening and growth occurred, causing a reduction in the number of particles/unit area. The coarsening rate of V(C,N) in the presence of aluminum is considerably lower than that of vanadium carbide, VC, or of V(C, N) in the absence of aluminum. Because of the unfavorable precipitation kinetics, any aluminum nitride (A1N) formed during cooling did not nucleate separately but was deposited on the pre-existing A1N particles, thus causing them to be coarsened very rapidly with decreasing cooling rate. Formerly with the Department of Metallurgy, The University of Sheffield, Sheffield, England     

Lie symmetry analysis and numerical solutions for thermosolutal chemically reacting radiative micropolar flow from an inclined porous surface

Steady, laminar, incompressible thermosolutal natural convection flow of micropolar fluid from an inclined perforated surface with convective boundary conditions is studied. Thermal radiative flux and chemical reaction effects are included to represent phenomena encountered in high-temperature materials synthesis operations. Rosseland's diffusion approximation is used to describe the radiative heat flux in the energy equation. A Lie scaling group transformation is implemented to derive a self-similar form of the partial differential conservation equations. The resulting coupled nonlinear boundary value problem is solved with Runge-Kutta fourth order numerical quadrature (shooting technique). Validation of solutions with an optimized Adomian decomposition method algorithm is included. Verification of the accuracy of shooting is also conducted as a particular case of nonreactive micropolar flow from a vertical permeable surface. The evolution of velocity, angular velocity (microrotation component), temperature, and concentration are examined for a variety of parameters including coupling number, plate inclination angle, suction/injection parameter, radiation-conduction parameter, Biot number, and reaction parameter. Numerical results for steady-state skin friction coefficient, couple stress coefficient, Nusselt number, and Sherwood number are tabulated and discussed. Interesting features of the hydrodynamic, heat and mass transfer characteristics are examined.     

Catalytic steam reforming of tar for enhancing hydrogen production from biomass gasification: a review

Presently, the global search for alternative renewable energy sources is rising due to the depletion of fossil fuel and rising greenhouse gas (GHG) emissions. Among alternatives, hydrogen (H₂) produced from biomass gasification is considered a green energy sector, due to its environmentally friendly, sustainable, and renewable characteristics. However, tar formation along with syngas is a severe impediment to biomass conversion efficiency, which results in process-related problems. Typically, tar consists of various hydrocarbons (HCs), which are also sources for syngas. Hence, catalytic steam reforming is an effective technique to address tar formation and improve H₂ production from biomass gasification. Of the various classes in existence, supported metal catalysts are considered the most promising. This paper focuses on the current researching status, prospects, and challenges of steam reforming of gasified biomass tar. Besides, it includes recent developments in tar compositional analysis, supported metal catalysts, along with the reactions and process conditions for catalytic steam reforming. Moreover, it discusses alternatives such as dry and autothermal reforming of tar.