Extraction and characterization of soluble protein fractions from Phaseolus lunatus L seeds

Legume proteins as a potential source of valuable nutrients, are the object of several studies in order to obtain the best use. A basic knowledge becomes more important for those proteins from species not wholly utilized, before using them as food ingredients. The objective of this work was to determine several structural and nutritional characteristics of the protein fractions from Phaseolus lunatus, separated in different solvents. The relative amount of extraction for the albumins (ALB), globulins (GLB), prolamines (PRL), and glutelins (GLT) was 62.3, 34.8, 1.4 and 1.5%, respectively. The SDS-PAGE electrophoretic profile of both ALB and GLB, showed seven common bands in intervals from 10 to 95 kDa, and 14 to 99 kDa, respectively; the amino acids profile showed that PRL was the rich fraction in sulfurated amino acids (11.5 g/100 g protein); the content of lysine in the fraction of ALB was smaller than expected but the requirement of the FAO in the fractions of GLB and GLT was covered. In general, the fraction of GLB had the best balance of amino acids and digestibility (80%); however, it had a relationship of calculated protein efficiency ratio (C-PER) of 0.11, smaller than the ratio in ALB (0.97). The calorimetric analysis showed denatured temperatures around 90 degrees C for the ALB, GLB, and GLU fractions. The PRL fraction probably did not present a thermal transition because the proteins were denaturalized by the extraction conditions.     

Development of novel soy-protein-based superabsorbent matrixes through the addition of salts

The addition of salts, like sodium bicarbonate (SB) or carbonate (SC), into the formulation of bioplastic materials may alter their hydrophilic character to a significant extent. Soy protein isolate (SPI) is a byproduct of the soybean oil industry, which, when properly blended with glycerol (GL), can be further processed through a lab-scale injection molding device. A maximum in the water uptake around 2250 or 2500% is obtained for bioplastics obtained when either SB or SC content is around 1 wt %, respectively. Thus, they exceed the limit to be considered superabsorbent materials (SAMs). Regarding their mechanical properties, a higher presence of SB within the SPI/GL matrix provides materials with a higher extensibility and lower Young's modulus. A higher water uptake is observed after replacing SB for SC in the formulation, probably related to a higher alkalinization of the material as well as to the high hydrophilicity of the carbonate. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47012.     

Ocratoxin A in human plasma and coffee from Costa Rica by ELISA

Costa Rica is not an exception in the prevalence of ochratoxin A in human plasma, in this research the presence of the micotoxin was found in 95% of the 149 samples studied. The presence of ocratoxina A also was studied in 110 samples of toasted and grounded coffee from the most important 12 coffee factories of the country and from 7 supermarkets. With the exception of one negative sample the rest of them have concentrations of micotoxin below 4000 ng/kg. An association between the coffee consumption and the presence of ochratoxin A in plasma was attempted to be found as well as in the consumption of beer, but there were any statistically significant difference in the average level of mycotoxin between the coffee consumers and non coffee consumers neither between beer consumers and no beer consumers.     

Flexible and Conductive 3D Printable Polyvinylidene Fluoride and Poly(N,N‐dimethylacrylamide) Based Gel Polymer Electrolytes

In this work, 3D printable gel polymer electrolytes (GPEs) based on N,N‐dimethylacrylamide (DMAAm) and polyvinylidene fluoride (PVDF) in lithium chloride containing ethylene glycol solution are synthesized and their physicochemical properties are investigated. 3D printing is carried out with a customized stereolithography type 3D gel printer named “Soft and Wet Intelligent Matter‐Easy Realizer” and free forming GPE samples having variable shapes and sizes are obtained. Printed PVDF/PDMAAm‐based GPEs exhibit tunable mechanical properties and favorable thermal stability. Electrochemical proprieties of the printed GPEs are carried out via impedance spectroscopy in the temperature range of 25–90 °C by varying PVDF content. Ionic conductivity as high as 6.5 × 10^?4 S cm^?1 is achieved at room temperature for GPE containing low PVDF content (5 wt%) and conductivity of the GPEs is increased as temperature rises.     

A New Smoothened Antagonist Bearing the Purine Scaffold Shows Antitumour Activity In Vitro and In Vivo

The Smoothened (SMO) receptor is the most druggable target in the Hedgehog (HH) pathway for anticancer compounds. However, SMO antagonists such as vismodegib rapidly develop drug resistance. In this study, new SMO antagonists having the versatile purine ring as a scaffold were designed, synthesised, and biologically tested to provide an insight to their mechanism of action. Compound 4s was the most active and the best inhibitor of cell growth and selectively cytotoxic to cancer cells. 4s induced cell cycle arrest, apoptosis, a reduction in colony formation and downregulation of PTCH and GLI1 expression. BODIPY-cyclopamine displacement assays confirmed 4s is a SMO antagonist. In vivo, 4s strongly inhibited tumour relapse and metastasis of melanoma cells in mice. In vitro, 4s was more efficient than vismodegib to induce apoptosis in human cancer cells and that might be attributed to its dual ability to function as a SMO antagonist and apoptosis inducer.     

Understanding the detrimental effect of nitrate presence on EBPR systems: effect of the plant configuration

The interaction between enhanced biological phosphorus removal (EPBR) and biological nitrogen removal may result in EBPR failure in full‐scale wastewater treatment plants (WWTPs). This work studies one of the common causes of this failure: the presence of nitrate in the anaerobic phase, which may act as an inhibitor for polyphosphate accumulating organisms (PAO) activity or may activate the competition between PAO and denitrifying bacteria for the carbon source. Several batch experiments were performed with different carbon sources (acetic acid, propionic acid and sucrose) at different nitrate concentrations using PAO‐enriched sludge from two different pilot plants: an anaerobic/aerobic sequential batch reactor (SBR) and an anaerobic/anoxic/aerobic (A²/O) continuous plant. The results imply that the operational conditions of the A²/O pilot plant selected a PAO population capable of i) coexisting with nitrate without an inhibitory effect and ii) outcompeting denitrifying bacteria for the carbon source, in contrast to the SBR pilot plant where nitrate had an inhibitory effect on EBPR. Copyright © 2012 Society of Chemical Industry     

Effect of cavity surface coating and molding parameters on pressure drop: Developing a new software for rapid calculations

Nowadays, many of the plastic components are aesthetic pieces, and they are fabric, thermoplastic vulcanizates (TPVs), or film coated. In the case of upholstered pieces, they are injected onto a textile tissue introduced into the mold, and they are finished with an edging process. Simulation programs used to optimize the injection process are not able to simulate the injection over fabrics, and therefore, it is difficult to select an injection machine without knowing the pressure drop inside the mold and without knowing how the parameters affect to the injection cycle or to the aesthetic aspect of this kind of pieces. This article presents a software for rapid calculations during the filling phase without the need for complex modeling. The program will be able to calculate pressure drop and other flow parameters that are fundamental for a good design of an industrial mold used in in‐mold decoration (IMD) technique. POLYM. ENG. SCI., 2012. © 2011 Society of Plastics Engineers     

Carbon,nitrogen and phosphorus recovery from liquid swine wastes: a review

Due to the pollution characteristics of the wastewater generated in piggeries, these waste streams have to be treated before discharging into the environment. These wastes have a high content of organic matter, nitrogen and phosphorus that can be converted or recovered into valuable products. The valuation of swine waste by anaerobic digestion has already been assessed, but no systematic review on the technologies used for recovering nutrients from this waste has been reported to date. Therefore, the present work has the goal of presenting the most studied technologies to different scales of recovery of carbon (i.e. organic matter), nitrogen and phosphorus from swine waste. The main characteristics and parameters of the processes involved in these technologies (mainly air stripping, membrane, enhance biological phosphorus removal and struvite formation) are also highlighted, pointing out its advantages and disadvantages and posing some final feasibility considerations on the subject addressed. Experiments reported in the literature proved that technologies used for nutrient recovery from swine waste are mostly applied to the effluents previously treated by anaerobic digestion as a primary treatment, and greater effort is required for the future implementation of these technologies in large scale. © 2020 Society of Chemical Industry