Thermo‐responsive polyurethane hydrogels based on poly(ethylene glycol) and poly(caprolactone): Physico‐chemical and mechanical properties

In this work, we present the synthesis and characterization of chemically crosslinked polyurethanes (PU) composed of poly(ethylene glycol) (PEG) and poly(caprolactone) diol (PCL‐diol), as hydrophilic and hydrophobic segments respectively, poly(caprolactone) triol (PCL‐triol), to induce hydrolysable crosslinks, and hexamethylene diisocyanate (HDI). The syntheses were performed at 45 °C, resulting in polyurethanes with different PEG/PCL‐diol/PCL‐triol mass fractions. All the PUs are able to crystallize and their thermal properties depend on the global composition. The water uptake capacities of the PU increase as the PEG amount increases. The water into hydrogels is present in different environments, as bounded, bulk and free water. The PU hydrogels are thermo‐responsive, presenting a negative dependence of the water uptake with the temperature for PEG rich networks, which gradually changes to a positive behavior as the amount of poly(caprolactone) (PCL) segments increases. However, the water uptake capacity changes continuously without an abrupt transition. Scanning electron microscopy (SEM) analyses of the hydrogel morphology after lyophilization revealed a porous structure. Mechanical compression tests revealed that the hydrogels present good resilience and low recovery hysteresis when they are subject to cycles of compression–decompression. In addition, the mechanical properties of the hydrogels varies with the composition and crosslinking density, and therefore with the water uptake capacity. The PU properties can be tuned to fit for different applications, such as biomedical applications. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43573.     

Flexible and Conductive 3D Printable Polyvinylidene Fluoride and Poly(N,N‐dimethylacrylamide) Based Gel Polymer Electrolytes

In this work, 3D printable gel polymer electrolytes (GPEs) based on N,N‐dimethylacrylamide (DMAAm) and polyvinylidene fluoride (PVDF) in lithium chloride containing ethylene glycol solution are synthesized and their physicochemical properties are investigated. 3D printing is carried out with a customized stereolithography type 3D gel printer named “Soft and Wet Intelligent Matter‐Easy Realizer” and free forming GPE samples having variable shapes and sizes are obtained. Printed PVDF/PDMAAm‐based GPEs exhibit tunable mechanical properties and favorable thermal stability. Electrochemical proprieties of the printed GPEs are carried out via impedance spectroscopy in the temperature range of 25–90 °C by varying PVDF content. Ionic conductivity as high as 6.5 × 10^?4 S cm^?1 is achieved at room temperature for GPE containing low PVDF content (5 wt%) and conductivity of the GPEs is increased as temperature rises.     

Integrating Outsourcing in the Maintenance Process

Outsourcing of software life cycle activities is a growing business area in many sectors influenced by Information Technologies. This fact, coupled with the usual lack of planning and high costs of software maintenance, may invite many organizations to outsource this important process of the software life cycle. Such outsourcing should be relied to a technological associate who can carry out this process using an adequate methodological foundation. In this paper we present the outsourcing strategy that we have integrated in MANTEMA, a methodology for software maintenance developed by our university and Atos ODS, a multinational organization which provides software maintenance services to third-party organizations.     

End-of-life decision-making in the hospital: current practice and future prospects

The contributions of the various ulnar-innervated muscles of the hand to the hypothenar compound muscle action potential (CMAP) were estimated by directly stimulating individual muscles and by analyzing CMAP shape changes resulting from manipulations that changed individual muscle lengths. The results show that the first peak of the negative phase of the hypothenar CMAP comes from the hypothenar muscles, but that the second peak is due to a large volume-conducted potential from the interosseous muscles. The interosseous contribution affects both the amplitude and the area of the CMAP, and makes these parameters sensitive to changes in the configuration of the fingers and the temperature gradient in the hand. To reduce the interosseous contribution, a "balanced reference" consisting of two reference electrodes, one over each tendon, is proposed.     

Boundary layer drug delivery using a helical catheter

BACKGROUND: A catheter-based approach for local endovascular drug delivery has been developed. The catheter is deployed percutaneously, while the end of the catheter is in the form of a helix that is placed just proximal to the vascular site to be treated. The helices are in contact with the vessel wall. A number of small holes is drilled in the coils of the catheter through which drug is infused, so that the infused drug remains within the blood fluid 'boundary layer' adjacent to the vessel wall. This approach is expected to be highly efficient for administration of antithrombotic and antiproliferative agents that target processes leading to vascular occlusion, heart attacks, and strokes. METHODS: The helical catheter was qualitatively evaluated using optical dye density measurements of Evans blue dye infused using an in vitro steady flow system under a physiologic range of conditions. To further demonstrate the efficiency of the technique, its capacity to inhibit thrombosis was evaluated in a baboon thrombosis model. The catheter was inserted into a femoral arteriovenous shunt (blood flow rate = 100 ml/min) and placed proximal to a segment of highly thrombogenic Dacron vascular graft (4.0 mm i.d.). Integrelin (an inhibitor of platelet glycoprotein IIb/IIIa; doses: 0.25-1.0 microg/min) and hirudin (an antithrombin; doses: 10-100 microg/min) were used to inhibit thrombus formation. RESULTS: Experimental flow visualization studies demonstrated that high concentrations of the infused Evans blue dye were retained near the vessel wall. In the animal experiments, platelet deposition on the Dacron graft surface was reduced by 82-97% (Integrelin) and 68-92% (hirudin) over 1-2 h of blood exposure. The local antithrombotic effects produced were found to be 200-fold and 30-fold more efficient than systemic administration of the same agents. CONCLUSIONS: Local drug infusion using the helical catheter approach can achieve high drug concentration levels at target sites, may avoid systemic effects, and can reduce cost of therapy by reducing total drug requirements.     

Pathogenic mechanisms in the rheumatoid nodule: comparison of proinflammatory cytokine production and cell adhesion molecule expression in rheumatoid nodules and synovial membranes from the same patient

OBJECTIVE: To investigate the production of proinflammatory cytokines and expression of cell adhesion molecules in the rheumatoid nodule. METHODS: Cytokine content (tumor necrosis factor alpha [TNFalpha], interleukin-1beta [IL-1beta], and IL-1 receptor antagonist [IL-1Ra]), at the messenger RNA (mRNA) and protein levels, and cell adhesion molecule expression were studied in 16 rheumatoid nodules and 6 synovial membranes. RESULTS: Macrophages in the rheumatoid nodules contained TNFalpha, IL-1beta, and IL-1Ra mRNA and protein, particularly in perivascular cells of the stroma and in the palisading layer. All cell adhesion molecules studied were expressed in both the rheumatoid nodules and synovial membranes, with increased expression of E-selectin in the rheumatoid nodule compared with the synovial membrane, and with the absence of vascular cell adhesion molecule 1 expression on cells of the palisading layer in the rheumatoid nodule. CONCLUSION: The presence of similar proinflammatory cytokines and cell adhesion molecules in the rheumatoid nodule and synovial membrane suggests that similar pathogenic processes result in the chronic inflammation and tissue destruction in these lesions.     

Visualizing the dynamics of T cell activation: intracellular adhesion molecule 1 migrates rapidly to the T cell/B cell interface and acts to sustain calcium levels

T cell recognition typically involves both the engagement of a specific T cell receptor with a peptide/major histocompatibility complex (MHC) and a number of accessory interactions. One of the most important interactions is between the integrin lymphocyte function-associated antigen 1 (LFA-1) on the T cell and intracellular adhesion molecule 1 (ICAM-1) on an antigen-presenting cell. By using fluorescence video microscopy and an ICAM-1 fused to a green fluorescent protein, we find that the elevation of intracellular calcium in the T cell that is characteristic of activation is followed almost immediately by the rapid accumulation of ICAM-1 on a B cell at a tight interface between the two cells. This increased density of ICAM-1 correlates with the sustained elevation of intracellular calcium in the T cell, known to be critical for activation. The use of peptide/MHC complexes and ICAM-1 on a supported lipid bilayer to stimulate T cells also indicates a major role for ICAM-1/LFA-1 in T cell activation but, surprisingly, not for adhesion, as even in the absence of ICAM-1 the morphological changes and adhesive characteristics of an activated T cell are seen in this system. We suggest that T cell antigen receptor-mediated recognition of a very small number of MHC/peptide complexes could trigger LFA-1/ICAM-1 clustering and avidity regulation, thus amplifying and stabilizing the production of second messengers.     

cDNA cloning and functional characterization of the mouse Ca2+-gated K+ channel, mIK1. Roles in regulatory volume decrease and erythroid differentiation

We have cloned from murine erythroleukemia (MEL) cells, thymus, and stomach the cDNA encoding the Ca2+-gated K+ (KCa) channel, mIK1, the mouse homolog of hIK1 (Ishii, T. M., Silvia, C., Hirschberg, B., Bond, C. T., Adelman, J. P., and Maylie, J. (1997) Proc. Natl. Acad. Sci.(U. S. A. 94, 11651-11656). mIK1 mRNA was detected at varied levels in many tissue types. mIK1 KCa channel activity expressed in Xenopus oocytes closely resembled the Kca of red cells (Gardos channel) and MEL cells in its single channel conductance, lack of voltage-sensitivity of activation, inward rectification, and Ca2+ concentration dependence. mIK1 also resembled the erythroid channel in its pharmacological properties, mediating whole cell and unitary currents sensitive to low nM concentrations of both clotrimazole (CLT) and its des-imidazolyl metabolite, 2-chlorophenyl-bisphenyl-methanol, and to low nM concentrations of iodocharybdotoxin. Whereas control oocytes subjected to hypotonic swelling remained swollen, mIK1 expression conferred on oocytes a novel, Ca2+-dependent, CLT-sensitive regulatory volume decrease response. Hypotonic swelling of voltage-clamped mIK1-expressing oocytes increased outward currents that were Ca2+-dependent, CLT-sensitive, and reversed near the K+ equilibrium potential. mIK1 mRNA levels in ES cells increased steadily during erythroid differentiation in culture, in contrast to other KCa mRNAs examined. Low nanomolar concentrations of CLT inhibited proliferation and erythroid differentiation of peripheral blood stem cells in liquid culture.