Pressure acid leaching of arid-region nickel laterite ore: Part I: effect of water quality

The effect of water salinity on the reactions occurring during pressure acid leaching of an arid-region laterite ore, using hypersaline water, seawater, sub-potable water and tap water, is examined. Particular emphasis is placed on the mineralogy of the residue and its implications with regard to residue volume/mass, overall acid consumption and nickel extraction. Analysis of a pressure acid leach residue by electron microprobe indicates that the residual nickel is present in phases that contain silicon and varying concentrations of aluminium, but are deficient in sulphur. Incomplete extraction of nickel from the ore may not be attributed to any one mineral phase.     

Oxidation Behavior of Rare-Earth Disilicate–Silicon Nitride Ceramics

The oxidation behavior and microstructure of the oxidized surfaces of RE₂Si₂O₇–Si₃N₄ ceramics were investigated. The high oxidation resistance of these materials at 1400°C is attributed to the minimization of amorphous phases via devitrification to disilicates that are in equilibrium with SiO₂, the oxidation product of Si₃N₄. Crystals of RE₂Si₂O₇ grew out of the surface silicate in prefered orientations that were dictated by crystal structure. The morphology of the microstructure of the oxidized surfaces was shown to be partially dependent on the concentration of impurities; the presence of Ca was found to coincide with the growth of Gd₂Si₂O₇ and Dy₂Si₂O₇ crystals with high aspect ratios.     

Process region changes for rapidly propagating cracks

A finite element model of a plate, which contains an initial crack subjected to a rapid loading at its faces, is investigated. A cell model of the prospective process region is adopted. The cell size is assumed to represent some characteristic intrinsic material length. The size of the process region is not predetermined but depends at every time on the number of cells that have reached a state characteristic for the process region i.e. essentially instability if load control would prevail. Outside the process region the material is assumed to be linearly elastic.For low loading magnitudes the simulations show a rather long period of crack acceleration, but at higher loads this period is short or even not detectable, and a constant terminal velocity, significantly lower than the Rayleigh wave velocity, is reached. At lower loads both the energy release rate and the extension of the process region stay rather constant, but at higher loads they increase considerably with time, even though the crack tip velocity stays constant. Thus it appears that a tendency towards increased energy flow to the process region is met by increased size of this region, and thereby increased energy dissipation per unit of crack growth, rather than by increased crack edge velocity. The process region may finally occupy several cell rows, and the control of the process region by the characteristic length is thus lost. This can explain the apparent loss of the unique relation between stress intensity factor and crack edge velocity at high crack velocities.In some simulations branching was obtained. The results from the simulations showed qualitative agreement with some recent experimental results e.g. those by Ravi-Chandar.     

Performance evaluation of a whole-body PET scanner using the NEMA protocol. National Electrical Manufacturers Association

This study evaluates the performance of the newly developed high-resolution whole-body PET scanner ECAT EXACT HR+. METHODS: The scanner consists of four rings of 72 bismuth germanate block detectors each, covering an axial field of view of 15.5 cm with a patient port of 56.2 cm. A single block detector is divided into an 8 x 8 matrix, giving a total of 32 rings with 576 detectors each. The dimensions of a single detector element are 4.39 x 4.05 x 30 mm3. The scanner is equipped with extendable tungsten septa for two-dimensional two-dimensional measurements, as well as with three 68Ge line sources for transmission scans and daily quality control. The spatial resolution, scatter fraction, count rate, sensitivity, uniformity and accuracy of the implemented correction algorithms were evaluated after the National Electrical Manufacturers Association protocol using the standard acquisition parameters. RESULTS: The transaxial resolution in the two-dimensional mode is 4.3 mm (4.4 mm) in the center and increases to 4.7 mm (4.8 mm) tangential and to 8.3 mm (8.0 mm) radial at a distance of r = 20 cm from the center. The axial slice width measured in the two-dimensional mode varies between 4.2 and 6.6 mm FWHM over the transaxial field of view. In the three-dimensional mode the average axial resolution varies between 4.1 mm FWHM in the center and 7.8 mm at r = 20 cm. The scatter fraction is 17.1% (32.5%) for a lower energy discriminator level of 350 keV. The maximum true event count rate of 263 (345) kcps was measured at an activity concentration of 142 (26.9) kBq/ml. The total system sensitivity for true events is 5.7 (27.7) cps/Bq/ml. From the uniformity measurements, we obtained a volume variance of 3.9% (5.0%) and a system variance of 1.6% (1.7%). The implemented three-dimensional scatter correction algorithm reveals very favorable properties, whereas the three-dimensional attenuation correction yields slightly inaccurate results in low- and high-density regions. CONCLUSION: The ECAT EXACT HR+ has an excellent, nearly isotropic spatial resolution, which is advantageous for brain and small animal studies. While the relatively low slice sensitivity may hamper the capability for performing fast dynamic two-dimensional studies, the scanner offers a sufficient sensitivity and count rate capacity for fully three-dimensional whole-body imaging.     

Acute pain and the obstetric patient: recent developments in analgesia for labor and delivery

Recombinant DNA technology has made possible the localization and isolation of disease-related genes, the tracking of disease-related alleles through family pedigrees, the direct detection of the pathological lesion itself and the in vitro expression of both normal and mutant genetic information at the mRNA and protein levels. Undoubtedly the most immediate practical spin-off from recombinant DNA technology in medical genetics has been in the sphere of improved disease diagnosis and prediction, where advances have been dramatic. We review the nature of inherited disease, current approaches to its analysis, diagnosis and prediction, mechanisms of gene mutation and the available techniques for mutation detection. Also examined are the various genetic factors that can alter the relationship between genotype and clinical phenotype. Finally, the genetics of selected adult-onset disorders are explored in the context of considering the accuracy and reliability of disease prediction.     

Wire bonding to advanced copper, low-K integrated circuits, the metal/dielectric stacks, and materials considerations

There are three areas to consider when designing/implementing wire bonding to advanced ULSI damascene-copper chips having copper metallization and low dielectric-constant polymers embedded beneath them (Cu/LoK). These are: 1) the copper-pad top-surface oxidation inhibitor coating - metal/organic/inorganic. (Current work involves evaluating the metal and inorganic options); 2) the low dielectric constant materials available; 3) under-pad metal/polymer stacks and support structures necessary for bondability and reliability. There are also various polymer/metallurgical interactions, resulting in long term packaged-device reliability problems, that can occur as the result of the wire bonding process over low modulus, LoK materials with barriers. These include cracked diffusion barriers, copper diffusion into the LoK polymers, cracking/spalling/crazing of the LoK materials, and bond pad indentation ("cupping"). Low-K polymer materials, with high expansion coefficients and low thermal conductivities, can also increase the stress and further extend any existing damage to barriers. Well designed LoK and the underpad structures should have no negative effect on bonding parameters and be invisible to the bonding process.     

Lymphocytes mediate TNF-alpha-induced endothelial cell adhesion molecule expression: studies on SCID and RAG-1 mutant mice

TNF-alpha is known to elicit a rapid increase in the expression of specific endothelial cell adhesion molecules (ECAMs) within different vascular beds. The aim of this study was to determine whether lymphocytes contribute to the increased ECAM expression elicited by TNF-alpha. A dual radiolabeled mAb technique was used to quantify constitutive and TNF-alpha-induced expression of ICAM-1, VCAM-1, E-selectin, and P-selectin in different vascular beds (lung, heart, stomach, mesentery, small intestine, large intestine, and muscle) in wild-type and SCID mice. In reconstitution experiments, either whole splenocytes, T cell-enriched splenocytes, or B cell-enriched splenocytes were injected into SCID mice 48 h before TNF-alpha administration. Although the constitutive expression of ECAMs differed only slightly between wild-type and SCID mice, TNF-alpha-induced ECAM expression was markedly blunted in SCID mice compared with wild-type mice. This blunted response to TNF-alpha was also demonstrated for VCAM-1 in recombination activating gene (RAG)-1 mutant mice. Reconstitution studies revealed that administration of 50 x 10(6) splenocytes in SCID mice at 48 h before cytokine treatment restored the TNF-alpha-induced expression of VCAM-1 to levels normally observed in wild-type mice. Reconstitution with T cell- but not B cell-enriched splenocytes, also restored the TNF-alpha-induced expression of VCAM-1 in SCID mice to wild-type levels. These results implicate circulating T lymphocytes as modulators of the increased ECAM expression elicited by TNF-alpha.     

Transcriptional regulation of prostaglandin-H synthase-2 gene in human trophoblasts

Abnormal PG production by placental PG-H synthase (PGHS) is associated with preeclampsia. There are two PGHS isozymes, and their regulation in trophoblasts is presently unknown. We hypothesized that the PGHS isozymes are differentially regulated in human trophoblasts. To test this hypothesis, we transfected primary trophoblasts and JEG3 cells with promoter constructs of either PGHS-1 or PGHS-2 genes. We found that in both cell systems, the basal activity of PGHS-2 promoter was 10- to 30-fold higher than the activity of PGHS-1 promoter. In response to either 12-0-tetradecanoylphorbol-13-acetate (TPA) or 8-bromo-cAMP, we observed an increase in PGHS-2 promoter activity but no change in activity of PGHS-1 promoter. Similarly, both agents enhanced PGHS-2 expression, as well as prostaglandin E2 production. The activity of PGHS-2 promoter was potentiated by coexpression of protein kinase A and inhibited by coexpression of kinase A inhibitor. Aspirin attenuated the stimulatory effect of TPA on PGHS-2 promoter. We conclude that both PGHS-1 and PGHS-2 promoters are active in trophoblasts. The activity of PGHS-2 promoter is stimulated by either TPA or cAMP, and the stimulatory effect of TPA is attenuated by aspirin. These pathways may play a role in modulation of prostanoid synthesis by trophoblasts.     

VEGF mRNA induction correlates with changes in the vascular architecture upon spinal cord damage in the rat

The multiple cellular and molecular processes induced by injury to the central nervous system (CNS) are still poorly understood. In the present study, we investigated the response of the vasculature and the expression of mRNA for the angiogenic vascular endothelial growth factor (VEGF) following X-irradiation of the spinal cord in the newborn and following traumatic spinal cord injury in the adult rat. Both lesion models induced changes in the density and the distribution pattern of blood vessels: while X-irradiation led to a permanent local increase in vascular density in the fibre tracts of the exposed segments, a transient local sprouting of vessels was induced upon traumatic spinal cord injury. In situ hybridization showed that an increase of VEGF mRNA anticipated and overlapped with the vascular responses in both lesion models. In addition to the temporal correlation of VEGF expression and vascular sprouting, there was a clear correlation in the spatial distribution patterns. Following X-irradiation, the expression of VEGF mRNA was restricted to the fibre tracts, precisely the areas where the changes in the vasculature were observed later on. Upon transection in the adult animal, VEGF was mainly detectable at the border of the lesion area, where the transient increase in vascular density could be observed. Interestingly, according to the type of lesion applied, astrocytes (X-irradiation) or inflammatory cells (presumably microglial cells or macrophages; traumatic lesion) are the cellular sources of VEGF mRNA. Our results strongly indicate that VEGF is crucially involved in mediating vascular changes following different types of injury in the CNS.