Physiological parameter monitoring from optical recordings with a mobile phone

We show that a mobile phone can serve as an accurate monitor for several physiological variables, based on its ability to record and analyze the varying color signals of a fingertip placed in contact with its optical sensor. We confirm the accuracy of measurements of breathing rate, cardiac R-R intervals, and blood oxygen saturation, by comparisons to standard methods for making such measurements (respiration belts, ECGs, and pulse-oximeters, respectively). Measurement of respiratory rate uses a previously reported algorithm developed for use with a pulse-oximeter, based on amplitude and frequency modulation sequences within the light signal. We note that this technology can also be used with recently developed algorithms for detection of atrial fibrillation or blood loss.     

Passive 350 GHz Video Imaging Systems for Security Applications

Journal of Infrared, Millimeter, and Terahertz Waves - Passive submillimeter-wave imaging is a concept that has been in the focus of interest as a promising technology for personal security...     

Effect of Interface Regions on the Thermoelectric Properties of Alternating ZnO/ZnO:Al Stripe Structures

A series of bar-shaped samples consisting of lateral arrangements of alternating ZnO:Al and ZnO stripes was fabricated by radiofrequency (RF)-sputtering and microfabrication techniques on glass substrates. Throughout the series, the number of interfaces between ZnO and ZnO:Al was varied whilst the material fractions of ZnO:Al and ZnO within the bars were not altered. Lateral thermoelectric transport parameters, i.e., Seebeck effect and electrical resistivity, were measured as a function of temperature for all microstructured samples and two reference samples of ZnO:Al and undoped ZnO. The transport direction through the bar was perpendicular to the stripe direction, such that the electrons and phonons have to pass all interfaces. The transport coefficients of the microstructured samples show clear dependence on the number of interfaces between ZnO and ZnO:Al. Thermoelectric measurements, photoluminescence, and Raman measurements indicate that this is due to diffusion of Al donors along the grain boundaries into the undoped ZnO stripes, which takes place during the fabrication process. Modeling of the dependence of the Seebeck coefficient and the resistivity of the series of samples on the basis of a network model accounting for donor diffusion supports these findings.     

Analysis, design, and optimization of spiral inductors andtransformers for Si RF ICs

Silicon integrated circuit spiral inductors and transformers are analyzed using electromagnetic analysis. With appropriate approximations, the calculations are reduced to electrostatic and magnetostatic calculations. The important effects of substrate loss are included in the analysis. Classic circuit analysis and network analysis techniques are used to derive two-port parameters from the circuits. From two-port measurements, low-order, frequency-independent lumped circuits are used to model the physical behavior over a broad-frequency range. The analysis is applied to traditional square and polygon inductors and transformer structures as well as to multilayer metal structures and coupled inductors. A custom computer-aided-design tool called ASITIC is described, which is used for the analysis, design, and optimization of these structures. Measurements taken over a frequency range from 100 MHz to 5 GHz show good agreement with theory     

Monolithic AGC loop for a 160 Mb/s transimpedance amplifier

A new BiCMOS monolithic automatic gain control (AGC) amplifier with wide dynamic range is described. The forward gain path has 120 kΩ transimpedance, 140 MHz bandwidth, input noise current spectral density of 1.17 pA/√Hz and input signal current handling capability of 4 mA. An on-chip peak detector incorporating a 25 pA current source yields AGC hold times in the millisecond range     

Modeling and analysis of substrate coupling in integrated circuits

This paper describes a fast and accurate simulator for characterizing the effects of substrate coupling on integrated-circuit performance. The technique uses the electrostatic Green function of the substrate medium and the fast Fourier transform algorithm. It is demonstrated that this technique is suitable for optimization of layout for minimization of substrate coupling. Analysis of substrate coupling in different types of substrates and the utility of guard rings in different types of substrates is also discussed. Experimental verification of the models is presented     

Design and evaluation of optimal cepstral lifters for accessingarticulatory codebooks

It is noted that of great importance to the success of the articulatory approach to speech coding is the use of a good distortion measure between a given speech signal and the entries in a stored codebook of impulse responses and corresponding vocal-track shapes (articulatory codebook). One promising distortion measure is the weighted cepstral distortion. Since the impulse responses in the articulatory codebook do not include glottal characteristics, the authors derive optimal weighting functions (cepstral lifters) to reduce the influence of a varying glottal source on the cepstral distortion measure. This is done by examining the ensemble of cepstral coefficients of speech produced by an articulatory speech synthesizer that also includes a vocal-cord model. The obtained cepstral lifters are optimal for the given ensemble of cepstral coefficients and for given constraints on the weighting function. They are different for cepstral coefficients derived from the power spectrum (FFT cepstra) and for those derived from LPC (linear predictive coding) coefficients (LPC cepstra). The performances of the obtained cepstral lifters are compared in an articulatory codebook search     

在VoIP网关中实现高精度包同步

随着VoIP网关能够在POTS线或T1/E1中继器与IP网络之间进行业务的互操作,传真、MODEM和电话业务正越来越多地依靠VoIP技术,取代了传统的TDM设备.在部署VoIP网关时,发送和接收时序同步的机理经常被忽视.因而需要改进包同步以提高业务的可靠性和质量,这一点在传统的电路交换设备中是能够实现的.     

Inverted Organic Solar Cells with Sol–Gel Processed High Work‐Function Vanadium Oxide Hole‐Extraction Layers

For large‐scale and high‐throughput production of organic solar cells (OSCs), liquid processing of the functional layers is desired. We demonstrate inverted bulk‐heterojunction organic solar cells (OSCs) with a sol–gel derived V₂O₅ hole‐extraction‐layer on top of the active organic layer. The V₂O₅ layers are prepared in ambient air using Vanadium(V)‐oxitriisopropoxide as precursor. Without any post‐annealing or plasma treatment, a high work function of the V₂O₅ layers is confirmed by both Kelvin probe analysis and ultraviolet photoelectron spectroscopy (UPS). Using UPS and inverse photoelectron spectroscopy (IPES), we show that the electronic structure of the solution processed V₂O₅ layers is similar to that of thermally evaporated V₂O₅ layers which have been exposed to ambient air. Optimization of the sol gel process leads to inverted OSCs with solution based V₂O₅ layers that show power conversion efficiencies similar to that of control devices with V₂O₅ layers prepared in high‐vacuum.     

Wide wavelength tuning of sampled grating tunable twin-guide laser diodes

Tuning characteristics of widely tunable twin-guide (TTG) laser diodes with sampled gratings (SGs) are reported. Two SGs, providing slightly different reflection spectra, enable wide tunability by means of Vernier effect tuning. The device structure is vertically integrated and, hence, a DFB-like laser is obtained, which makes a phase tuning section unnecessary and facilitates easy and fast device characterisation. Although the tuning section can tune the SG reflection spectra by only /spl sim/2 nm, an overall tuning range of 28 nm has been achieved by employing Vernier effect tuning. Within the aforementioned tuning range, five supermodes are usable and can be tuned continuously without any mode-hops. The lasers operate at /spl sim/1.55 /spl mu/m wavelength and achieve a maximum output power of 12 mW.