稀土Pr对Al2O3-SiO2(Sf)/ZL109复合材料组织及性能的影响

本文采用挤压浸渗法 ,制得不同稀土含量的硅酸铝短纤维增强铝基复合材料。用光学显微镜观察了复合材料的铸造显微组织 ,分析了稀土含量对共晶硅组织形态的影响 ;用扫描电镜对复合材料基体中的稀土相进行了观察 ,探索了稀土相的分布位置及其形态 ;并对不同稀土含量的复合材料进行了摩擦磨损实验 ,结果表明稀土能增强复合材料的耐磨性     

氰化浸出体系中金的溶剂萃取

本文评述了金的碱性氰化溶液溶剂萃取研究与开发工作的最新进展。包括改性胺，季铵盐，磷氧化物及胍类萃取剂等。     

丙烯酸酯聚氨酯紫外固化凝胶生成动力学研究

采用丙烯酸酯聚氨酯和二苯甲酮/安息香乙醚复合光敏剂,对该体系紫外光固化反应的凝胶生成动力学进行分析。用红外光谱定量测定光聚合过程的变化,发现光聚合反应主要是以双键打开,交联为特征的,并得出1408cm~(-1)双键吸收峰随光照时间而变化的关系式:P_(c=c)=0.325 t~(0.135)。临界凝胶点可由双键反应程度与凝胶分数之间关系外推得到,凝胶点后,体系中存在一个凝胶与溶胶之间分配关系,此时凝胶与溶胶共存,凝胶中双键反应程度P_(A(g))>总双键反应程度P_A>溶胶中双键反应程度P_(A(S))。随着凝胶增加,P_A和P_(A(g))逐渐上升,而P_(A(s))下降。此体系的紫外固化实验工作曲线与理论值基本一致。     

仲胺衍生物柴油流动改进剂

考察了十八种胺衍生物改善高含蜡柴油低温流动性的作用规律。结果表明，仲胺衍生物主要是通过增溶柴油中的长链正构烷烃，使浊点、冷滤点降低，从而改善柴油低温性能。仲胺衍生物与T1804流动改进剂（乙烯-醋酸乙烯酯聚合物）复合可以改善蜡晶的分散性能，对降低柴油冷滤点有增效作用。     

语音时域分割研究

在语音时域挑选剩余可懂度低的可用置换集合,置换集合是语音TDS系统中不可缺少的重要环节,本文给出了可用置换选取的条件、客观评价标准和方法。     

泊松方程数值解法的加速收敛法

用数值方法对泊松方程求解时，往往要对迭代的中间结果作适当的压缩处理，以加快收敛速度和避免溢出。本文提出一种单一指数因子的非线性压缩法。一维数值模拟结果表明，平衡态时不必进行压缩处理。而在非平衡态时，最佳指数压缩因子的大小与杂质浓度有关。参考本文给出的数值计算结果，根据给定器件的杂质浓度分布，选定一最佳指数压缩因子，可以使泊松方程的数值求解过程具有最快的收敛速度。     

Theoretical foundation of the 80/20 rule

A rigorous analysis of the 80/20 rule is made using an index for the observed values of the variables. Three important findings are identified. First, a sufficient condition is provided for Burrell's inverse relationship between minimum holdings and average circulation rate. Second, an indexed version of Lotka's law is used to derive a sufficient condition for Egghe's finding on the 80/20 rule. Third, through the computer simulations of the Simon-Yule model of Lotka's law, we identify the entry rate of new holdings as well as the number of circulations when the entry rate is a decreasing function to be crucial factors for the pattern of the 80/20-type curve.     

Mobility modeling, location tracking, and trajectory prediction inwireless ATM networks

Wireless ATM networks require efficient mobility management to cope with frequent mobile handoff and rerouting of connections. Although much attention has been given in the literature to network architecture design to support wide-area mobility in public ATM networks, little has been done to the important issue of user mobility estimation and prediction to improve the connection reliability and bandwidth efficiency of the underlying system architecture. This paper treats the problem by developing a hierarchical user mobility model that closely represents the movement behavior of a mobile user, and that, when used with appropriate pattern matching and Kalman filtering techniques, yields an accurate location prediction algorithm, HLP, or hierarchical location prediction, which provides necessary information for advance resource reservation and advance optimal route establishment in wireless ATM networks     

安居水电厂灯泡贯流式水轮发电机组的试运行

本文对安居水电厂2台灯泡贯流式水轮发电机组自投入试运行以来,出现的受油器壳体开裂、导叶接力器缸体和活塞拉伤、转轮桨叶传动拐臂连接销脱落、导叶外轴承座漏水、主轴工作密封漏水侵入水导轴承、锁锭装置固定螺钉剪断等故障的经过、原因分析及其处理办法进行了叙述。     

Analysis of adhesive bonded composite lap joints with transverse stitching

The effect of transverse stitching on the stresses in the adhesive is investigated using an adhesive sandwich model with nonlinear adhesive properties and a transverse stitching model for adhesive bonded composite single-lap and double-lap joints. Numerical results indicate that, among all stitching parameters, thread pretension and stitch density have significant effect on the peel stresses in the adhesive; increase in the thread pretension and the stitch density leads to a decrease in peel stress in the adhesive, while an increase in other parameters generally results in a negligible reduction in peel stress. The effect of stitching was found to be negligible on the shear stresses in the adhesive. Thus it is concluded that stitching is effective for the joints where peel stresses are critical and ineffective for those where shear stresses are critical.