Environmentally Friendly Graphene Inks for Touch Screen Sensors

Graphene-based materials have attracted significant attention in many technological fields, but scaling up graphene-based technologies still faces substantial challenges. High-throughput top-down methods generally require hazardous, toxic, and high-boiling-point solvents. Here, an efficient and inexpensive strategy is proposed to produce graphene dispersions by liquid-phase exfoliation (LPE) through a combination of shear-mixing (SM) and tip sonication (TS) techniques, yielding highly concentrated graphene inks compatible with spray coating. The quality of graphene flakes (e.g., lateral size and thickness) and their concentration in the dispersions are compared using different spectroscopic and microscopy techniques. Several approaches (individual SM and TS, and their combination) are tested in three solvents (N-methyl-2-pyrrolidone, dimethylformamide, and cyrene). Interestingly, the combination of SM and TS in cyrene yields high-quality graphene dispersions, overcoming the environmental issues linked to the other two solvents. Starting from the cyrene dispersion, a graphene-based ink is prepared to spray-coat flexible electrodes and assemble a touch screen prototype. The electrodes feature a low sheet resistance (290 Ω □⁻¹) and high optical transmittance (78%), which provide the prototype with a high signal-to-noise ratio (14 dB) and multi-touch functionality (up to four simultaneous touches). These results illustrate a potential pathway toward the integration of LPE-graphene in commercial flexible electronics.     

A low-voltage low-power threshold voltage monitor for CMOS process sensing

In this paper a low-voltage low-power threshold voltage monitor for CMOS process sensing is presented. This circuit works in weak inversion and it can be used as an elementary circuit block for on-chip compensation of the intra-die or inter-die threshold voltage variations in low-power analog and mixed-signal SoC, since it is robust to temperature and power supply voltage variations (similar to the bandgap voltage reference). The proposed threshold voltage monitor has been successfully verified in a standard 0.35-μm n-well CMOS TSMC process. Experimental results have confirmed that the circuit generates an average reference voltage of 758 mV (very close to the typical threshold voltage when extrapolated to absolute zero) for a 950 mV power supply voltage, with a variation of 39 ppm/°C for the −20 to 80°C temperature range.     

A New Hand-Held Microsystem Architecture for Biological Analysis

This paper presents a hand-held microsystem based on new fully integrated magnetoresistive biochips for biomolecular recognition (DNA hybridization, antibody antigen interaction, etc.). Magnetoresistive chip surfaces are chemically treated, enabling the immobilization of probe biomolecules such as DNA or antibodies. Fluid handling is also integrated in the biochip. The proposed microsystem not only integrates the biochip, which is an array of 16times16 magnetoresistive sensors, but it also provides all the electronic circuitry for addressing and reading out each transducer. The proposed architecture and circuits were specifically designed for achieving a compact, programmable and portable microsystem. The microsystem also integrates a hand-held analyzer connected through a wireless channel. A prototype of the system was already developed and detection of magnetic nanoparticles was obtained. This indicates that the system may be used for magnetic label based bioassays     

Energy Management Fuzzy Logic Supervisory for Electric Vehicle Power Supplies System

This paper introduces an energy management strategy based on fuzzy logic supervisory for road electric vehicle, combining a fuel cell power source and two energy storage devices, i.e., batteries and ultracapacitors. The control strategy is designed to achieve the high-efficiency operation region of the individual power source and to regulate current and voltage at peak and average power demand, without compromising the performance and efficiency of the overall system. A multiple-input power electronic converter makes the interface among generator, energy storage devices, and the voltage dc-link bus. Classical regulators implement the control loops of each input of the converter. The supervisory system coordinates the power flows among the power sources and the load. The paper is mainly focused on the fuzzy logic supervisory for energy management of a specific power electronic converter control algorithm. Nevertheless, the proposed system can be easily adapted to other converters arrangements or to distributed generation applications. Simulation and experimental results on a 3-kW prototype prove that the fuzzy logic is a suitable energy management control strategy.     

Proposal and implementation of a new interpolation technique for a double folding A/D converter

This proposal of a new interpolation technique is presented for application in a double folding A/D converter with interpolation. This interpolation technique is applied in the master latches of the A/D converter without consumption increase. Compared to resistive interpolation, this new interpolation technique has the advantage of avoiding the resistive interpolation ladder adding only three transistors in some master latches and the current is the same as in the simple master latch. A 6-bit A/D converter was designed and implemented in a 1.2 μm BiCMOS process, an F_T of 8 GHz, to explain the implementation of interpolation circuitry and evaluate the experimental results.     

Effects of Phonon Confinement on Anomalous Thermalization,Energy Transfer,and Upconversion in Ln3+‐Doped Gd2O3 Nanotubes

There is a growing interest in understanding how size‐dependent quantum confinement affects the photoluminescence efficiency, excited‐state dynamics, energy‐transfer and thermalization phenomena in nanophosphors. For lanthanide (Ln³⁺)‐doped nanocrystals, despite the localized 4f states, confinement effects are induced mostly via electron–phonon interactions. In particular, the anomalous thermalization reported so far for a handful of Ln³⁺‐doped nanocrystals has been rationalized by the absence of low‐frequency phonon modes. This nanoconfinement may further impact on the Ln³⁺ luminescence dynamics, such as phonon‐assisted energy transfer or upconversion processes. Here, intriguing and unprecedented anomalous thermalization in Gd₂O₃:Eu³⁺ and Gd₂O₃:Yb³⁺,Er³⁺ nanotubes, exhibiting up to one order of magnitude larger than previously reported for similar materials, is reported. This anomalous thermalization induces unexpected energy transfer from Eu³⁺ C₂ to S₆ crystallographic sites, at 11 K, and ²H_11/2 → ⁴I_15/2 Er³⁺ upconversion emission; it is interpreted on the basis of the discretization of the phonon density of states, easily tuned by varying the annealing temperature (923–1123 K) in the synthesis procedure, and/or the Ln³⁺ concentration (0.16–6.60%).     

All-Optical Vestigial Sideband Generation Using a Semiconductor Optical Amplifier

An all-optical setup to generate vestigial sideband signals based on self-phase modulation in a semiconductor optical amplifier is experimentally demonstrated at 10 Gb/s. Sideband suppressions higher than 15 dB are reported with improved eye opening. Wavelength-independent operation over 26 nm is demonstrated. Increased chromatic dispersion tolerance is verified: a receiver sensitivity penalty of 5.3 dB, relative to back-to-back, is obtained after transmission over 2720 ps/nm; whereas conventional double sideband is penalized by 4.0 dB after 1360 ps/nm     

The influence of oxygen partial pressure on growth of the (Hg,Re)-1223 intergrain junction

Hg/sub 0.82/Re/sub 0.18/Ba/sub 2/Ca/sub 2/Cu/sub 3/O/sub 8+/spl delta// polycrystalline samples were successfully obtained by using different oxygen partial pressure in the annealing treatment of the precursor ceramic. The doping state was confirmed by X-ray powder diffraction pattern analysis and by observing distinct thermopower values at room temperature. Also, the intergrain regions have shown an improvement in the critical current density when using the precursor preparation with 10% O/sub 2/ and 90% Ar (optimal doped). The optimal doped sample has presented the highest /spl alpha/ exponent of the J/sub c//spl prop/[1-(T/T/sub c/)/sup 2/]/sup /spl alpha// dependence. For the case of (Hg,Re)-1223 polycrystalline superconductor applications, the /spl alpha/ exponent can be used as a junction quality parameter.     

Phase separation, effects of biaxial strain, and ordered phase formations in cubic nitride alloys

The thermodynamics as well as the energetics and the structural properties of cubic group-III nitrides alloys have been investigated by combining first-principles total energy calculations and cluster expansion methods. In particular results are shown for the ternary In_xGa_1−xN and the quaternary Al_xGa_yIn_1−x−yN alloys. Phase separation is predicted to occur at growth temperatures, for both fully relaxed alloys. A remarkable influence of an external biaxial strain on the phase separation, with the formation of ordered phase structures has been found for the InGaN alloy. These findings are used to clarify the origin of the light emission process in InGaN-based optoelectronic devices. Results are shown for the composition dependence of the lattice constant and of the energy gap in quaternary Al_xGa_yIn_1−x−yN alloys.