Rheology and Consolidation of Colloidal Alumina-Coated Silicon Nitride Suspensions

In an attempt to improve the colloidal processing of Si₃N₄ ceramics, we studied the rheology and consolidation of colloidal suspensions of Si₃N₄ particles (average particle size 0.7 μm) with small Al₂O₃ particles (average particle size 20 nm). It was found that at pH >7, the viscosity of the mixtures increased and then decreased with an increasing concentration of Al₂O₃. λpotential measurements, optical micrographs, and visible light absorptance measurement suggest that such viscosity behavior is due to clustering of Si₃N₄ particles bridged by the small Al₂O₃ particles. This is also supported by the Derjaquin-Landau-Verwey-Overbeek (DLVO) potential calculations that show the barrier height in the DLVO potential between Al₂O₃ and Si₃N₄ is small. The small barrier height under current experimental conditions stems from the small size of the Al₂O₃ particles. The small barrier height allows the thermal motion of the two kinds of particles to overcome the barrier and attach to each other. The adsorption of small Al₂O₃ particles on Si₃N₄ can occur even when both Al₂O₃ and Si₃N₄ carry the same sign of charges. The adsorption of Al₂O₃ on Si₃N₄ also increases the density of consolidated compacts.     

Chromate leaching from inhibited primers: Part I. Characterisation of leaching

Leaching and characterisation studies have been undertaken on two chromate-inhibited epoxy polyamide primers. Leaching was carried out in 5% (w/v) NaCl solutions at different pH values (1, 3, 5 and 7) and the amount of Cr released into solution was monitored over time. Cr release was initially high, but as the immersion time increased the leaching from the primers slowed. Prior to and after immersion, the primers were characterised by a number of techniques including electron microprobe analysis, X-ray microdiffraction, Raman spectroscopy, and positron annihilation lifetime spectroscopy. The unexposed primers were found to contain the inorganic phases SrCrO₄, BaSO₄ and TiO₂ (anatase or rutile). Upon immersion, water uptake by the primers was observed, together with a decrease in the amount of SrCrO₄ in the primers. These studies provide insights into the mechanism of chromate leaching from inhibited primers.     

Binary and ternary blends of poly(vinyl chloride), hytrel,and a polyurethane

Binary blends of poly(vinyl chloride) and a poly(ether urethane) containing 20 and 40 weight percent, respectively, of poly(vinyl chloride) have been prepared by solution blending from tetrahydrofuran and their degree of mixing investigated using dynamic mechanical analysis. In the polyurethane, transitions were found at ?19°C and ?119°C. The former was attributed to the glass transition and the latter to a Schatzki type of motion of the polyether sequences. This latter transition occurred at a temperature which is higher than the literature value for the low temperature transition in poly(tetrahydrofuran), which is equivalent to the polyether sequence in the polyurethane. This discrepancy is attributed to the influence of neighboring hard segments present because of incomplete segmental phase separation of the polyurethane. For the blends only one very broad transition was observed, indicating that there was substantial mixing of these two polymers. Three ternary blends were prepared, also by solution blending, containing poly(vinyl chloride), Hytrel, and the polyurethane in the ratios 1:1:1, 1:2:1, and 2:1:1, respectively. In the first two blends there was clear evidence of phase separation. It was only in the 2:1:1 blend that an apparently significantly compatible material resulted.     

The estimation of the residual capacity of sealed lead-acid cells using the impedance technique

The problem of estimating the residual usable energy of a lead-acid cell has been intensified by the introduction of fully sealed units. These rely on the recombination of gaseous oxygen produced during overcharge at the positive electrode with the active material at the negative electrode. This introduction has removed the possibility of electrolyte density measurements, third electrode measurements and restricted residual capacity assessments to the two cell terminals. A method for this process is described using a parameter based on a characteristic frequency. The parameter is also a useful measure of cell ageing.Nomenclature R _SOL Ohmic resistance of cell () - Charge-transfer resistance of positive and negative electrodes () - CL Double-layer capacitance of both positive and negative electrodes (F) - Warburg diffusion (S^–1/2) - C _EXT External series capacitor in analogue Fig. 5 (F) - R _EXT External resistor in parallel withC _EXT in the anologue circuit Fig. 5 () - IND Inductor in Fig. 5 representing the geometrical effects of the cell at high frequencies (Henries) - R _IND External resistor in parallel with IND in the analogue circuit Fig. 5 () - Roughness factor allowing for the porosity of both electrodes     

Segregation in Single-Crystal Fully Stabilized Yttria-Zirconia

X-ray photoelectron spectroscopy (XPS) has been used to study surface segregation in 9.5 mol% single-crystal Y₂O₃-ZrO₂ which has been subjected to air anneals at temperatures ranging from 900° to 1500°C. The kinetics of segregation reveal an enrichment of Y, Si, Na, and Fe at short times; however, at longer times surface equilibrium is reached. The heats of segregation for Y, Si, Na and Fe, determined from Arrhenius plots, were 9.3 ± 3.0, 59.0 ± 7.0, –23.5 ± 11.5, –18.0 ± 6.0 kJ/mol, respectively. XPS analysis of the equilibrium states at all temperatures revealed a distinct surface layer which, given the positive heats of segregation for Si and Y, is quite stable.     

Runout effects in milling: Surface finish, surface location error, and stability

This paper investigates the effect of milling cutter teeth runout on surface topography, surface location error, and stability in end milling. Runout remains an important issue in machining because commercially-available cutter bodies often exhibit significant variation in the teeth/insert radial locations; therefore, the chip load on the individual cutting teeth varies periodically. This varying chip load influences the machining process and can lead to premature failure of the cutting edges. The effect of runout on cutting force and surface finish for proportional and non-proportional tooth spacing is isolated here by completing experiments on a precision milling machine with 0.1 μm positioning repeatability and 0.02 μm spindle error motion. Experimental tests are completed with different amounts of radial runout and the results are compared with a comprehensive time-domain simulation. After verification, the simulation is used to explore the relationships between runout, surface finish, stability, and surface location error. A new instability that occurs when harmonics of the runout frequency coincide with the dominant system natural frequency is identified.     

Invasive species detection in Hawaiian rainforests using airborne imaging spectroscopy and LiDAR

Remote sensing of invasive species is a critical component of conservation and management efforts, but reliable methods for the detection of invaders have not been widely established. In Hawaiian forests, we recently found that invasive trees often have hyperspectral signatures unique from that of native trees, but mapping based on spectral reflectance properties alone is confounded by issues of canopy senescence and mortality, intra- and inter-canopy gaps and shadowing, and terrain variability. We deployed a new hybrid airborne system combining the Carnegie Airborne Observatory (CAO) small-footprint light detection and ranging (LiDAR) system with the Airborne Visible and Infrared Imaging Spectrometer (AVIRIS) to map the three-dimensional spectral and structural properties of Hawaiian forests. The CAO-AVIRIS systems and data were fully integrated using in-flight and post-flight fusion techniques, facilitating an analysis of forest canopy properties to determine the presence and abundance of three highly invasive tree species in Hawaiian rainforests.

The LiDAR sub-system was used to model forest canopy height and top-of-canopy surfaces; these structural data allowed for automated masking of forest gaps, intra- and inter-canopy shadows, and minimum vegetation height in the AVIRIS images. The remaining sunlit canopy spectra were analyzed using spatially-constrained spectral mixture analysis. The results of the combined LiDAR-spectroscopic analysis highlighted the location and fractional abundance of each invasive tree species throughout the rainforest sites. Field validation studies demonstrated < 6.8% and < 18.6% error rates in the detection of invasive tree species at  7 m² and  2 m² minimum canopy cover thresholds. Our results show that full integration of imaging spectroscopy and LiDAR measurements provides enormous flexibility and analytical potential for studies of terrestrial ecosystems and the species contained within them.     

New integer linear programming approaches for course timetabling

The most complete form of academic timetabling problem is the population and course timetabling problem. In this problem, there may be multiple classes of each subject, and the decision on which students are to constitute each class is made in concert with the decision on the timetable for each class. In order to solve this problem, it is normally simplified or decomposed in some fashion. One simplification commonly used in practice is known as blocking: it is assumed that the classes can be partitioned into sets of classes (or blocks) that will be timetabled in parallel. This restricts clashing to occur only between classes in the same block, and essentially removes the timetabling aspect of the problem, which can be carried out once the blocks are constituted and the classes populated. The problem of constituting the blocks and populating the classes, known as the course blocking and population problem, is nevertheless a challenging problem, and provides the focus of this paper. We demonstrate, using data provided by a local high school, that integer linear programming approaches can solve the problem in a matter of seconds. Key features include remodelling to remove symmetry caused by students with identical subject selection, and the observation that in practice, only integrality of the block composition variables needs to be enforced; the class population aspects of the model have strong integrality properties.     

Premedication with oral midazolam in children--an assessment of psychomotor function, anxiolysis, sedation and pharmacokinetics

We studied 30 children, aged 4 to 12 years, undergoing elective circumcision, premedicated with midazolam 0.5 mg.kg-1 and atropine 0.02 mg.kg-1 by mouth. A modified postbox test and the coding component of the Wechsler intelligence scale (WISC-R) was used to assess the preoperative effect of premedication on psychomotor function. Mood and sedation were also scored and related to serum midazolam concentrations. The children showed a significant decline in psychomotor performance 30 and 60 minutes after premedication when compared with their best unmedicated performance recorded the previous evening. This decline in psychomotor performance was only weakly associated with serum midazolam concentrations (r = 0.1). The postbox toy ratio is a suitable measurement of psychomotor performance in children because of its simplicity and ease of use in the clinical environment, although it may suffer the "test-retest" limitations of similar types of assessment. The sedative and anxiolytic effects of midazolam provide a quiet environment for a smooth induction of anaesthesia.     

Comparison of virtual path bandwidth assignment and routing methods

The virtual path (VP) can simplifyAtm network management by minimizing connection routing and admission costs, and by facilitating the layered control of resources. However, fully exploiting these advantages may lead to a large number of relatively low capacity virtual paths travelling on each physical link. If each VP is treated as a separate unit, as is commonly assumed, low path capacities will lead to low network utilisation. This paper carefully examines the trade-off between simplification through traffic separation and improved efficiency due to traffic consolidation. We review existing vp bandwidth assignment and control techniques, and propose a new vp tagging control method. A comparison shows that by permitting resource sharing between paths it is possible to influence significantly the trade-off between simplified network management and multiplexing gain from traffic consolidation.