Electrochimie du polynitrure de soufre dans les solvants non aqueux—I. Comportement dans l'acetonitrile

The electrochemical behaviour of polysulphur nitride was studied by cyclic voltametry in alkaline and silver salt acetonitrile solutions. In an alkaline salt solution during the cathodic polarization, superficial degradation of (SN)_x probably gives S₇N^? ions. In a silver perchlorate solution silver deposition was observed. It can be dissolved anodically. During the first anodic polarization, oxidation pic occurs. The quantity of electricity involved during this reaction is a function of the association constant of the electrolyte.     

Adaptive output-feedback stabilization of non-local hyperbolic PDEs

We address the problem of adaptive output-feedback stabilization of general first-order hyperbolic partial integro-differential equations (PIDE). Such systems are also referred to as PDEs with non-local (in space) terms. We apply control at one boundary, take measurements on the other boundary, and allow the system’s functional coefficients to be unknown. To deal with the absence of both full-state measurement and parameter knowledge, we introduce a pre-transformation (which happens to be based on backstepping) of the system into an observer canonical form. In that form, the problem of adaptive observer design becomes tractable. Both the parameter estimator and the control law employ only the input and output signals (and their histories over one unit of time). Prior to presenting the adaptive design, we present the non-adaptive/baseline controller, which is novel in its own right and facilitates the understanding of the more complex, adaptive system. The parameter estimator is of the gradient type, based on a parametric model in the form of an integral equation relating delayed values of the input and output. For the closed-loop system we establish boundedness of all signals, pointwise in space and time, and convergence of the PDE state to zero pointwise in space. We illustrate our result with a simulation.     

Towards a distributed multi-agent framework for shared resources scheduling

Nowadays, manufacturers have to share some of their resources with partners due to the competitive economic environment. The management of the availability periods of shared resources causes a problem because it is achieved by the scheduling systems, which assume a local environment where all resources are on the same site. Therefore, distributed scheduling with shared resources is an important research topic. In this communication, we introduce the architecture and behaviour of DSCEP framework (Distributed, Supervisor, Customer, Environment, and Producer) under shared resources situation with disturbances. We are using a simple example of manufacturing system to illustrate the ability of DSCEP framework to solve the shared resources scheduling problem in complex systems.     

Physiological and behavioral effects of coniferyl benzoate on avian reproduction

Various plant secondary metabolites related to cinnamic acid are of interest because of their repellency to birds and their occurrence in ecologically important food items. Coniferyl benzoate (CB), a phenylpropanoid ester that occurs in quaking aspen (Populus tremuloides) is of particular ecological interest because of its effect on ruffed grouse (Bonasa umbellus) feeding behavior and its possible influence on the population dynamics of this bird. During detoxification processes, CB and other analogous compounds are metabolized into by-products, such as ferulic acid (FA), that can cause anti-reproductive effects. We tested whether consumption of CB produces antire-productive effects similar to FA using male and female Japanese quail (Coturnix coturnix) as avian models for ruffed grouse. The parameters we investigated included: the production, morphology, and development of eggs; reproductive characteristics influenced by estrogen; serum prolactin levels; and male reproductive behavior. Dietary CB did not produce antireproductive effects similar to FA at intake levels that Japanese quail and ruffed grouse would freely consume. Consumption of CB by Japanese quail significantly reduced egg production and body mass but did not affect male reproductive performance. Coniferyl benzoate's effect on egg production may be explained by lower energy acquisition and retention rather than endocrine changes per se. Contrary to previous reports, it is unlikely that FA, or similar compounds act directly as estrogen mimics or antagonists. Although, CB did reduce egg production in quail, it is unlikely that it would affect egg production in wild ruffed grouse. Detoxification costs and the effects of CB on nutrient utilization may explain why ruffed grouse avoid high dietary levels of CB.     

Electrochemical behaviour of copper in neutral aerated chloride solution. I. Steady-state investigation

The electrochemical behaviour of a Cu rotating disc electrode in neutral aerated NaCl solution was investigated in the cathodic and anodic ranges and at the corrosion potential. In the cathodic range, where the reduction of oxygen takes place, reduction peaks allow the identification and quantitative evaluation of insoluble corrosion products (CuCl and Cu₂O). In the anodic range Cu is dissolved, most likely as CuCl ₂ ^– . A new mechanism for the anodic dissolution is proposed after comparing our data with previously published mechanisms. Corrosion currents were found to decrease with time and to be a function of the rotation rate of the electrode. Both the mixed kinetics of the anodic partial reaction and diffusion through a porous layer seem to be relevant in controllingl _corr.     

Interactive frames constructed in Second Life meetings: a study in educational and professional settings

Based on the analysis of “real” Second Life meetings data, in educational and professional settings, our objective is to understand the actual uses of this kind of Virtual World and more particularly, the interactive frames constructed in SL meetings and their interrelation with uses of communication media. The originality of our analytical framework stems from the combination of two perspectives: a third view perspective based on analyses of observational data and a first view perspective based on users’ reports on their experience in SL. Our results highlight: boundaries between serious and recreational registers; avatar’s expression and attribution of feelings to the person “behind”; spatial positioning as indicators and constructors of roles and engagement; management of communication fluidity and joint focus; narrowing of communication media used for task focus content; emerging mediation role for management of fractured exchanges.     

Development and pilot testing of the Neuromuscular Blockade Advisory System

The neuromuscular blocker advisory system (NMBAS) is a computer program developed to provide advisory guidance to anesthesiologists on the timing and dose of rocuronium to paralyze patients during surgery. It is believed that the use of such a system will administer the minimally effective amount of drug, maintaining the patient in a state of paralysis that is useful for surgery yet easily reversible. This will improve patient safety and result in more efficient care. In this paper we present the NMBAS, its basic methodology, and its development though a pilot study. Novel methods of handling neuromuscular response data are presented, including relaxation measurement and the enhanced-train-of-four sensing modality. New methods of handling nonlinearities at the neuromuscular junction to allow application of adaptive control techniques are presented. A novel form of modelling combining model swapping and RLSE adaptation to accommodate the patient variation seen with NMB drugs is introduced. A pilot study testing the NMBAS was undergone to prepare the NMBAS for application in a full clinical trial, in which patients undergoing prostate brachytherapy surgeries using rocuronium for intubation were admitted.     

Exact methods and a heuristic for the optimization of an integrated replenishment-storage planning problem

In this paper we study the coordination of different activities in a supply chain issued from a real case. Multiple suppliers send raw materials (RMs) to a distribution center (DC) that delivers them to a unique plant where the storage of the RMs and the finished goods is not possible. Then, the finished goods are directly shipped to multiple customers having just‐in‐time (JIT) demands. Under these hypotheses, we show that the problem can be reduced to multiple suppliers and one DC. Afterwards, we analyze two cases; in the first, we consider an uncapacitated storage at DC, and in the second, we analyze the capacitated storage case. For the first case, we show that the problem is NP‐hard in the ordinary sense using the Knapsack decision problem. We then propose two exact methods: a mixed integer linear program (MILP) and a pseudopolynomial dynamic program. A classical dynamic program and an improved one using the idea of Shaw and Wagelmans are given. With numerical tests we show that the dynamic program gives the optimal solution in reasonable time for quite large instances compared with the MILP. For the second case, the capacity limitation in DC is assumed, which makes the problem solving more challenging. We propose an MILP and a dynamic programming‐based heuristic that provides solutions close to the optimal solution in very short times.     

On the chemical vapour deposition of Ti3SiC2 from TiCl4-SiCl4-CH4-H2 gas mixtures

In the ternary system Ti-Si-C, the ternary compound Ti₃SiC₂ seems to exhibit promising thermal and mechanical properties. Its synthesis as a thin film from the vapour phase is very difficult owing to the complexity of the system. A contribution to the knowledge of the CVD of Ti₃SiC₂ from a TiCl₄-SiCl₄-CH₄-H₂ gas mixture is proposed on the basis of a thermodynamic approach. This approach is based on a reliable estimation of Ti₃SiC₂ thermodynamic data in good accordance with recent experimental results on its thermal stability. A first equilibrium calculation for the deposition on an inert substrate shows the influence of the experimental parameters on the composition of both the deposit and the gas phase. As a result, the deposition of Ti₃SiC₂ can be favoured by an excess of TiCl₄ ( 45%), a rather low pressure (10–20 kPa), high temperature ( 1273 K) and low H₂ dilution ratio. On the basis of equilibrium calculations for various reactive substrates, complex mechanisms of Ti₃SiC₂ deposition are pointed out, with intermediate steps of substrate consumption, e.g. the formation of TiC from a carbon substrate or TiSi₂ from a silicon substrate.