Dosage individualization of erythropoietin using a profile-dependent support vector regression

The external administration of recombinant human erythropoietin is the chosen treatment for those patients with secondary anemia due to chronic renal failure in periodic hemodialysis. The objective of this paper is to carry out an individualized prediction of the EPO dosage to be administered to those patients. The high cost of this medication, its side-effects and the phenomenon of potential resistance which some individuals suffer all justify the need for a model which is capable of optimizing dosage individualization. A group of 110 patients and several patient factors were used to develop the models. The support vector regressor (SVR) is benchmarked with the classical multilayer perceptron (MLP) and the Autoregressive Conditional Heteroskedasticity (ARCH) model. We introduce a priori knowledge by relaxing or tightening the epsilon-insensitive region and the penalization parameter depending on the time period of the patients' follow-up. The so-called profile-dependent SVR (PD-SVR) improves results of the standard SVR method and the MLP. We perform sensitivity analysis on the MLP and inspect the distribution of the support vectors in the input and feature spaces in order to gain knowledge about the problem.     

Region-based wavelet coding methods for digital mammography

Spatial resolution and contrast sensitivity requirements for some types of medical image techniques, including mammography, delay the implementation of new digital technologies, namely, computer-aided diagnosis, picture archiving and communications systems, or teleradiology. In order to reduce transmission time and storage cost, an efficient data-compression scheme to reduce digital data without significant degradation of medical image quality is needed. In this study, we have applied two region-based compression methods to digital mammograms. In both methods, after segmenting the breast region, a region-based discrete wavelet transform is applied, followed by an object-based extension of the set partitioning in hierarchical trees (OB-SPIHT) coding algorithm in one method, and an object-based extension of the set partitioned embedded block (OB-SPECK) coding algorithm in the other. We have compared these specific implementations against the original SPIHT and the new standard JPEG 2000, both using reversible and irreversible filters, on five digital mammograms compressed at rates ranging from 0.1 to 1.0 bit per pixel (bbp). Distortion was evaluated for all images and compression rates by the peak signal-to-noise ratio. For all images, OB-SPIHT and OB-SPECK performed substantially better than the traditional SPIHT and JPEG 2000, and a slight difference in performance was found between them. A comparison applying SPIHT and the standard JPEG 2000 to the same set of images with the background pixels fixed to zero was also carried out, obtaining similar implementation as region-based methods. For digital mammography, region-based compression methods represent an improvement in compression efficiency from full-image methods, also providing the possibility of encoding multiple regions of interest independently.     

On the effects of the packet size distribution on the packet loss process

Real-time multimedia applications have to use forward error correction (FEC) anderror concealment techniques to cope with losses in today’s best-effort Internet. The efficiency of these solutions is known however to depend on the correlation between losses in the media stream. In this paper we investigate how the packet size distribution affects the packet loss process, that is, the distribution of the number of lost packets in a block, the related FEC performance and the average loss run length. We present mathematical models for the loss process of the MMPP+M/D/1/K and the MMPP+M/M/1/K queues; we validate the models via simulations, and compare the results to simulation results with an MPEG-4 coded video trace. We conclude that the deterministic packet size distribution (PSD) not only results in lower stationary loss probability than the exponential one, but also gives a less correlated loss process, both at a particular average link load and at a particular stationary loss probability as seen by the media stream.Our results show that for applications that can only measure the packet loss probability, the effects of the PSD on FEC performance are higher in access networks, where a single multimedia stream might affect the multiplexing behavior. Our results show that the effects of the PSD on FEC performance are higher in access networks, where a single multimedia stream might affect the multiplexing behavior and thus can improve the queuing performance by decreasing the variance of its PSD.     

Transmission Fiber Chromatic Dispersion Dependence on Temperature: Implications on 40 Gb/s Performance

In this letter, we will evaluate the performance degradation of a 40 km high‐speed (40 Gb/s) optical system, induced by optical fiber variations of the chromatic dispersion induced by temperature changes. The chromatic dispersion temperature sensitivity will be estimated based on the signal quality parameters.     

A low power voltage limiter for a full passive UHF RFID sensor on a 0.35 μm CMOS process

This paper presents a low power voltage limiter design for avoiding possible damages in the analog front-end of a RFID sensor due to voltage surges whenever readers and tags are close. The proposed voltage limiter design takes advantage of the implemented bandgap reference and voltage regulator blocks in order to provide low deviation of the limiting voltage due to temperature variation and process dispersion. The measured limiting voltage is 2.9 V with a voltage deviation of only ±0.065 V for the 12 measured dies. The measured current consumption is only 150 nA when the reader and the tag are far away, not limiting the sensitivity of the tag due to an undesired consumption in the voltage limiter. The circuit is implemented on a low cost 2P4M 0.35 μm CMOS technology.     

Effect of dislocations on performance of LWIR HgCdTe photodiodes

The epitaxial growth of HgCdTe on alternative substrates has emerged as an enabling technology for the fabrication of large-area infrared (IR) focal plane arrays (FPAs). One key technical issue is high dislocation densities in HgCdTe epilayers grown on alternative substrates. This is particularly important with regards to the growth of HgCdTe on heteroepitaxial Si-based substrates, which have a higher dislocation density than the bulk CdZnTe substrates typically used for epitaxial HgCdTe material growth. In the paper a simple model of dislocations as cylindrical regions confined by surfaces with definite surface recombination is proposed. Both radius of dislocations and its surface recombination velocity are determined by comparison of theoretical predictions with carrier lifetime experimental data described by other authors. It is observed that the carrier lifetime depends strongly on recombination velocity; whereas the dependence of the carrier lifetime on dislocation core radius is weaker. The minority carrier lifetime is approximately inversely proportional to the dislocation density for densities higher than 10⁵ cm⁻². Below this value, the minority carrier lifetime does not change with dislocation density. The influence of dislocation density on the R₀A product of long wavelength infrared (LWIR) HgCdTe photodiodes is also discussed. It is also shown that parameters of dislocations have a strong effect on the R₀A product at temperature around 77 K in the range of dislocation density above 10⁶ cm⁻². The quantum efficiency is not a strong function of dislocation density.     

Nanocasting of Mesoporous In‐TM (TM = Co,Fe, Mn) Oxides: Towards 3D Diluted‐Oxide Magnetic Semiconductor Architectures

Transition metal (Co, Fe, Mn)‐doped In₂O_3?y mesoporous oxides are synthesized by nanocasting using mesoporous silica as hard templates. 3D ordered mesoporous replicas are obtained after silica removal in the case of the In‐Co and In‐Fe oxide powders. During the conversion of metal nitrates into the target mixed oxides, Co, Fe, and Mn ions enter the lattice of the In₂O₃ bixbyite phase via isovalent or heterovalent cation substitution, leading to a reduction in the cell parameter. In turn, non‐negligible amounts of oxygen vacancies are also present, as evidenced from Rietveld refinements of the X‐ray diffraction patterns. In addition to (In_1?xTM_x)₂O_3?y, minor amounts of Co₃O₄, α‐Fe₂O₃, and Mn_xO_y phases are also detected, which originate from the remaining TM cations not forming part of the bixbyite lattice. The resulting TM‐doped In₂O_3?y mesoporous materials show a ferromagnetic response at room temperature, superimposed on a paramagnetic background. Conversely, undoped In₂O_3?y exhibits a mixed diamagnetic‐ferromagnetic behavior with much smaller magnetization. The influence of the oxygen vacancies and the doping elements on the magnetic properties of these materials is discussed. Due to their 3D mesostructural geometrical arrangement and their room‐temperature ferromagnetic behavior, mesoporous oxide‐diluted magnetic semiconductors may become smart materials for the implementation of advanced components in spintronic nanodevices.     

Functionalized Microparticles Producing Scaffolds in Combination with Cells

The development of biologically instructive biomaterials with application for tissue regeneration has become the focus of intense research over the last years. This work reports a novel approach for the production of three‐dimensional constructs for tissue engineering applications based on the assembly of chitosan microparticles exhibiting specific biological response with cells. Chitosan microparticles with a size range between 20 and 70 μm are functionalized with platelet derived growth factor (PDFG‐BB). The functionalization is achieved by previous immobilization of an anti‐PDGF‐BB antibody, using a water‐soluble carbodiimide. When incubated with a cocktail of growth factors‐platelet lysates, the previously functionalized particles are able to target PDGF‐BB from the protein mixture. In vitro studies are carried out focusing on the ability of these systems to promote the assembly into a stable 3D construct triggered by the presence of human adipose stem cells, which act as crosslinker agents and induce the formation of a hydrogel network. The presence of immobilized growth factors gives to this system a biological functionality towards control on cell function. It is also bioresponsive, as cells drive the assembly process of the microgel. These versatile biomimetic microgels may provide a powerful tool to be used as an injectable system for non‐invasive tissue engineering applications with additional control over cellular function by creating specific microenvironments for cell growth.     

Thermal Effects of Microwave Energy in Agricultural Soil Radiation

The thermal treatment by millimeter waves for the soil disinfection can be one possible alternative to chemical treatments. This physical method is based on incrementing the soil temperature and its pathogens irradiating with high frequency electromagnetic waves. So the previous knowledge of the temperature distribution in the irradiated soil is essential for achieving an effective bad microorganism and weed seeds elimination. This report analyse the heating kinetic and spatial distribution of the maximum temperatures reached by the soil. It is presented a mathematic model about how are distributed the reached temperatures in the depth of the irradiated soil. This model concludes that when an orchard soil is irradiated superficially by microwaves, the microwaves have a big attenuation due to the soil dielectric properties and the water located in the pores of the most superficial layer. This fact causes a shield effect blocking the waves penetration in few centimetres. The heating by radiation is reduced to the superficial layer. The heating propagation in the depth is occurred by conduction following the Fourier equations.     

Multi-heterojunction large area HgCdTe long wavelength infrared photovoltaic detector for operation at near room temperatures

This paper describes a new multi-heterojunction n ⁺pp photovoltaic infrared photodetector. The device has been developed specifically for operation at temperatures of 200–300K in the long wavelength (8–14 μm) range of the infrared spectrum. The new structure solves the perennial problems of poor quantum efficiency and low dynamic resistance found in conventional long wavelength infrared photovoltaic detectors when operated near room temperature. Computer simulations show that devices with properly optimized multiple heterojunctions are capable of achieving the performance limits imposed by the statistical nature of thermal generation-recombination processes. In order to demonstrate the technology, multiple heterojunction devices have been fabricated on epilayers grown by isothermal vapor phase epitaxy of HgCdTe and in situ As p-type doping. The detector structures were formed using a combination of conventional dry etching, angled ion milling, and angled thermal evaporation for contact metal deposition. These multi-junction n ⁺pp HgCdTe heterostructure devices exhibit performances which make them useful for many applications. D* of optically immersed multiple heterostructure photovoltaic detectors exceeding 10⁸cmHz^1/2/W were measured at λ=10.6 μm and T=300K.