Curing and pyrolysis of cresol novolac epoxy resins containing [2‐(6‐oxido‐6H‐dibenz(c,e)(1,2)oxaphosphorin‐6‐yl)‐1,4‐naphthalenediol]

This study investigates the curing kinetics, thermal properties and decomposition kinetics of cresol novolac epoxy (CNE) with two curing agents, 2‐(6‐oxido‐6H dibenz(c,e)(1,2) oxaphosphorin‐6‐yl)‐1,4‐benzenediol (ODOPN), and phenol novolac (PN). In comparison with the conventional PN system, introducing ODOPN, a phosphorus‐containing bulky pendant group, into CNE increases T_g by 33°C, char yield from 30% to 38%, and LOI from 22 to 31. The DSC curing study reveals that the E_a of the CNE/ODOPN epoxy can be obtained by Kissinger's method. The resulting E_a values indicate that the catalytic effect of EMI is insignificant on CNE/ODOPN but is marked on CNE/PN, whose E_a was reduced from 131.5 to 75.6 KJ/mole. This result may be caused by the fact that the symmetric diol attached to the 1 and 4 positions of the naphthalene ring in ODOPN sets up a steadily resonating structure and inhibits the catalytic action. Further investigating the conversion ratio with curing temperature yielded experimental data that agreed closely with Kaiser's model. The orders of the autocatalyzed reaction, m, and the crosslinking reaction, n, are close to 0.5 and 1.0, respectively, independently of the scan rate. Finally, the TGA decomposition study by Ozawa's method demonstrates that the mean E_a declines with the phosphorus content, because the easy decomposition of the phosphorus compound in the initiation stage facilitates the formation of an insulating layer. However, results in this study further reveal an increasing tendency for E_a with decomposition conversion for an ODOPN/PN mixture with the ODOPN content of over 50%, probably because of the retardation of gas diffusion by the insulating layer of phosphorus compound.     

Synthesis and dielectric properties of polystyrene‐clay nanocomposite materials

Polystyrene‐clay nanocomposite (PsCN) materials were synthesized and their properties of crystallinity, thermal behavior, and dielectric characteristics were investigated. A polymerizable cationic surfactant, [2‐(dimethylamino)ethyl]triphenylphonium bromide, was used for the intercalation of montmorillonite (MMT). The organophilic MMT was prepared by Na⁺‐exchanged MMT and ammonium cations of a cationic surfactant in an aqueous medium. Organophilic styrene monomers were intercalated into the interlayer regions of organophilic clay hosts followed by a free‐radical polymerization. Exfoliation to 2 wt % MMT in the polystyrene (PS) matrix was achieved as revealed by X‐ray diffraction (XRD) and transmission electron microscopy (TEM). Thermal properties by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were also studied. The dielectric properties of PsCNs in the form of film with clay loading from 1.0 to 5.0 wt % were measured under frequencies of 100 Hz–1 MHz at 25–70°C. A decreased dielectric constant and low dielectric loss were observed for PsCN materials. The dielectric response at low frequency that originated from dipole orientation was suppressed due to the intercalation of clay materials. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1368–1373, 2004     

Automatic detection of depth of cut during end milling operation using acoustic emission sensor

Any shortfall in the required depth during milling machining can affect the dimensional accuracy of the part produced and can cause a catastrophic failure to the machine. Corrective remedies to fix the dimensions inaccuracy will increase the machining time and costs. In this work, a depth-of-cut monitoring system was proposed to detect depth of cut in real time using an acoustic emission sensor and prediction model. The characteristics of the sensor signal obtained in machining processes can be complex in terms of both nonlinearity and nonstationarity. To overcome this complexity, a regression model and an artificial neural network model were used to represent the relationship between the acoustic emission signal and the depth of cut. The model was tested under different machining cases and found to be efficient in predicting the depth of cut.     

The role of anergy in peripheral T cell unresponsiveness

When a T cell's encounter with specific antigen results in good signaling through the T cell antigen receptor yet does not lead to a proliferative response, the T cell enters a state of nonresponsiveness, or anergy. Anergy induction can result from a number of different situations, including antigen presentation by costimulation-deficient or "non-professional" antigen presenting cells, pharmacological blocking of T cell proliferation, or chronic stimulation of the T cell receptor by antigen. Anergy is a long-lived but temporary state characterized by a profound inability of the T cell to produce IL-2. Other effector functions may be affected to variable degrees. Anergy has been characterized most carefully under in vitro conditions, but several experimental models have demonstrated that T cells can also become anergic in vivo. This mechanism for tolerance induction may help to ensure that any mature autoreactive T cells which escape thymic deletion are unable to respond to host tissues. Furthermore, an understanding of the mechanism of anergy induction will most certainly lead to beneficial clinical applications, including improving graft acceptance and avoiding such deleterious immune responses as autoimmunity and allergy.     

Interaction of transport resistances with biochemical reaction in packed-bed solid-state fermentors: effect of temperature gradients

Subdermal superficial liposuction, first presented by the authors at the ISAPS Congress at Zurich in 1989, is performed with thin three-hole Mercedes cannulas (diameter ranges from 1.8 to 2 mm) to treat small and secondary adiposities and to allow better skin retraction. Suction of the subdermal layer of fat reduces the thickness and consistency of the superficial fat and enhances the possibility of skin retraction. In cases where there is a large adiposity of the abdomen, arms, or inner thighs, there is a conspicuous volume of fat whose weight tends to overstretch and to carry the overlying skin downward. In these cases we need to reduce the large fat volume to permit effective skin retraction. Therefore, we apply the principles of traditional liposuction with those of subdermal superficial liposuction to aspirate large amounts of fat from all the adipose layers. We call this technique Massive All Layer Liposuction (MALL). The amount of skin shrinkage after this "defatting" procedure is remarkable and the clinical results are very good. The MALL technique can be applied to other areas as well. In our experience this new liposuction technique has dramatically reduced the indications of abdominoplasties and dermolipectomies of inner thighs and arms.     

Learning of sequential movements in the monkey: process of learning and retention of memory

1. To characterize procedural learning and memory, we devised a behavioral paradigm that allows us to examine the process of learning of new procedures, repeatedly and without serious difficulties for primate subjects. We trained two monkeys to perform a sequential button press task. Upon pressing of a home key, 2 of 16 (4 x 4 matrix) light-emitting diode (LED) buttons (called "set") were illuminated simultaneously, and the monkey had to press them in a predetermined order that he had to find out by trial-and-error. A total of five sets (called "hyperset") was presented in a fixed order for completion of a trial; an error at any set aborted the trial. A given hyperset was repeated as a block of experiment until 20 successful trials were performed. Monkeys PI and BO experienced 313 and 92 hypersets, respectively. Most of these hypersets were experienced only once (1 block of experiment); the others (28 hypersets for monkey PI and 14 hypersets for monkey BO) were chosen for extensive practice. 2. The learning, indicated as the decrease in the number of trials to criterion and the decrease in the performance time, proceeded at three levels: 1) short-term and sequence-selective learning that occurred by repeating a particular hyperset during a block of experiment; our monkeys learned, to some degree, to perform a new hyperset within a short period (< 5 min); 2) long-term and sequence-selective learning that took place for each hyperset across days; by daily practice, they further improved their skills for performing the particular hyperset; and 3) long-term and sequence-unselective learning that was indicated by the improvement of performance for new hypersets; the monkeys were required to learn many hypersets, each just once (a block of trials), in which they performed gradually better with more experiences in the 2 x 5 task. 3. To examine whether the memory was retained for a long period, we had the monkey learn 12 hypersets sufficiently, then we stopped the training and retested them after 1 or 6 mo. After the 1-mo interruption the performance was significantly better than that for new hypersets. After the 6-mo interruption the performance was not different from new hypersets in terms of the number of trials but was significantly better than new hypersets in terms of the performance time. The results suggest that motor memory (measured by performance time) can be retained longer than procedural memory (measured by the number of trials).     

From research to practice: the effects of the jointly sponsored dissemination of an arthritis self-care nursing intervention

Various educational programs have been developed and found to be effective in the self-management of arthritis. This study reexamined the effectiveness of one such program, "Bone Up On Arthritis" (BUOA), when the program was delivered by a community-based service organization to a sample of persons (N = 154) who differed widely in disease type and demographic characteristics. Arthritis Foundation staff implemented BUOA at four national sites; data were collected and analyzed by University of Michigan nurse researchers. Investigators found improved scores on all outcome measures (self-care behavior, helplessness, pain, dysfunction, and depression). These findings suggest that "Bone Up" is an effective nursing intervention in multiple organizational and community environments and for diverse patient populations.     

Inhibition of neuronal calcium channels by a novel peptide spider toxin, DW13.3

Peptide toxins have proved to be useful agents, both in discriminating between different components of native calcium channel currents and in the molecular isolation and designation of their cloned channel counterparts. Here, we describe the isolation and characterization of the biochemical and physiological properties of a novel 74-amino acid peptide toxin (DW13.3) extracted from the venom of the spider Filistata hibernalis. The subtype specificity of DW13.3 was investigated using calcium channel currents recorded from two separate expression systems and several different cultured mammalian cell preparations. Overall, DW13.3 potently blocked all native calcium channel currents studied, with the exception of T-type currents recorded from GH3 cells. Examination of transiently expressed calcium channels in oocytes showed that DW13.3 had the highest affinity for alpha1A, followed by alpha1B > alpha1C > alpha1E. The affinity of DW13.3 for alpha1B N-type currents varied by 10-fold between expressed channels and native currents. Although block occurred in a similar 1:1 manner for all subtypes, DW13.3 produced a partial block of both alpha1A currents and P-type currents in cerebellar Purkinje cells. Selective occlusion of the P/Q-type channel ligand omega-conotoxin MVIIC (but not omega-agatoxin IVA) from its binding site in Purkinje neurons suggests that DW13.3 binds to a site close to the pore of the channel. The inhibition of different subtypes of calcium channels by DW13.3 reflects a common "macro" binding site present on all calcium channels except T-type.