Multi-objective optimization in wire-electro-discharge machining of TiC reinforced composite through Neuro-Genetic technique

This paper proposed a Neuro-Genetic technique to optimize the multi-response of wire electro-discharge machining (WEDM) process. The technique was developed through hybridization of a radial basis function network (RBFN) and non-dominated sorting genetic algorithm (NSGA-II). The machining was done on 5 vol% titanium carbide (TiC) reinforced austenitic manganese steel metal matrix composite (MMC). The proposed Neuro-Genetic technique was found to be potential in finding several optimal input machining conditions which can satisfy wide requirements of a process engineer and help in efficient utilization of WEDM in industry.     

The role of anergy in peripheral T cell unresponsiveness

When a T cell's encounter with specific antigen results in good signaling through the T cell antigen receptor yet does not lead to a proliferative response, the T cell enters a state of nonresponsiveness, or anergy. Anergy induction can result from a number of different situations, including antigen presentation by costimulation-deficient or "non-professional" antigen presenting cells, pharmacological blocking of T cell proliferation, or chronic stimulation of the T cell receptor by antigen. Anergy is a long-lived but temporary state characterized by a profound inability of the T cell to produce IL-2. Other effector functions may be affected to variable degrees. Anergy has been characterized most carefully under in vitro conditions, but several experimental models have demonstrated that T cells can also become anergic in vivo. This mechanism for tolerance induction may help to ensure that any mature autoreactive T cells which escape thymic deletion are unable to respond to host tissues. Furthermore, an understanding of the mechanism of anergy induction will most certainly lead to beneficial clinical applications, including improving graft acceptance and avoiding such deleterious immune responses as autoimmunity and allergy.     

Interaction of transport resistances with biochemical reaction in packed-bed solid-state fermentors: effect of temperature gradients

Subdermal superficial liposuction, first presented by the authors at the ISAPS Congress at Zurich in 1989, is performed with thin three-hole Mercedes cannulas (diameter ranges from 1.8 to 2 mm) to treat small and secondary adiposities and to allow better skin retraction. Suction of the subdermal layer of fat reduces the thickness and consistency of the superficial fat and enhances the possibility of skin retraction. In cases where there is a large adiposity of the abdomen, arms, or inner thighs, there is a conspicuous volume of fat whose weight tends to overstretch and to carry the overlying skin downward. In these cases we need to reduce the large fat volume to permit effective skin retraction. Therefore, we apply the principles of traditional liposuction with those of subdermal superficial liposuction to aspirate large amounts of fat from all the adipose layers. We call this technique Massive All Layer Liposuction (MALL). The amount of skin shrinkage after this "defatting" procedure is remarkable and the clinical results are very good. The MALL technique can be applied to other areas as well. In our experience this new liposuction technique has dramatically reduced the indications of abdominoplasties and dermolipectomies of inner thighs and arms.     

Learning of sequential movements in the monkey: process of learning and retention of memory

1. To characterize procedural learning and memory, we devised a behavioral paradigm that allows us to examine the process of learning of new procedures, repeatedly and without serious difficulties for primate subjects. We trained two monkeys to perform a sequential button press task. Upon pressing of a home key, 2 of 16 (4 x 4 matrix) light-emitting diode (LED) buttons (called "set") were illuminated simultaneously, and the monkey had to press them in a predetermined order that he had to find out by trial-and-error. A total of five sets (called "hyperset") was presented in a fixed order for completion of a trial; an error at any set aborted the trial. A given hyperset was repeated as a block of experiment until 20 successful trials were performed. Monkeys PI and BO experienced 313 and 92 hypersets, respectively. Most of these hypersets were experienced only once (1 block of experiment); the others (28 hypersets for monkey PI and 14 hypersets for monkey BO) were chosen for extensive practice. 2. The learning, indicated as the decrease in the number of trials to criterion and the decrease in the performance time, proceeded at three levels: 1) short-term and sequence-selective learning that occurred by repeating a particular hyperset during a block of experiment; our monkeys learned, to some degree, to perform a new hyperset within a short period (< 5 min); 2) long-term and sequence-selective learning that took place for each hyperset across days; by daily practice, they further improved their skills for performing the particular hyperset; and 3) long-term and sequence-unselective learning that was indicated by the improvement of performance for new hypersets; the monkeys were required to learn many hypersets, each just once (a block of trials), in which they performed gradually better with more experiences in the 2 x 5 task. 3. To examine whether the memory was retained for a long period, we had the monkey learn 12 hypersets sufficiently, then we stopped the training and retested them after 1 or 6 mo. After the 1-mo interruption the performance was significantly better than that for new hypersets. After the 6-mo interruption the performance was not different from new hypersets in terms of the number of trials but was significantly better than new hypersets in terms of the performance time. The results suggest that motor memory (measured by performance time) can be retained longer than procedural memory (measured by the number of trials).     

From research to practice: the effects of the jointly sponsored dissemination of an arthritis self-care nursing intervention

Various educational programs have been developed and found to be effective in the self-management of arthritis. This study reexamined the effectiveness of one such program, "Bone Up On Arthritis" (BUOA), when the program was delivered by a community-based service organization to a sample of persons (N = 154) who differed widely in disease type and demographic characteristics. Arthritis Foundation staff implemented BUOA at four national sites; data were collected and analyzed by University of Michigan nurse researchers. Investigators found improved scores on all outcome measures (self-care behavior, helplessness, pain, dysfunction, and depression). These findings suggest that "Bone Up" is an effective nursing intervention in multiple organizational and community environments and for diverse patient populations.     

Hardware Implementation of a Fixed-Point Decoder for Low-Density Lattice Codes

Journal of Signal Processing Systems - This paper describes a field-programmable gate array (FPGA) implementation of a fixed-point low-density lattice code (LDLC) decoder where the Gaussian mixture...     

Analysis of Reflectance Properties in 1D Photonic Crystal Containing Metamaterial and High-Temperature Superconductor

In the present work, reflectance properties of one-dimensional photonic crystal (1D PC) containing a metamaterial and high-temperature superconductor have been investigated theoretically and analyzed. The reflectance/transmittance spectrum of the proposed structure is obtained by using the characteristic or transfer-matrix method (TMM). The results show that by increasing the thickness of the metamaterial layer, the width of the second reflection band decreases while the width of the first reflection band remains almost the same though it shifts towards the higher frequency side. In addition to this, a new band gap arises in the lower side of frequency. But, when the thickness of the superconductor layer is increased, the width of both the bands increases and no additional band arises in this case. Moreover, the reflection band is also affected by varying the operating temperature of the superconducting layer and the results show that bands get narrower by increasing the operating temperature. Finally, the effect of incident angle on the reflection band has been discussed for both transverse electric (TE) and transverse magnetic (TM) polarizations.     

Biocompatible antimicrobial cotton fibres for healthcare industries: a biogenic approach for synthesis of bio‐organic‐coated silver nanoparticles

Cotton fibres coated with biogenically fabricated silver nanoparticles (SNPs) are most sought material because of their enhanced activity and biocompatibility. After successful synthesis of SNPs on cotton fibres using leaf extract of Vitex negundo Linn, the fibres were studied using diffuse reflectance spectroscopy, scanning electron microscopy, nanoparticle tracking analysis, energy dispersive X‐ray, and inductively coupled plasma atomic emission spectrometry. The characterisation revealed uniformly distributed spherical agglomerates of SNPs having individual particle size around 50 nm with the deposition load of 423 μg of silver per gram of cotton. Antimicrobial assay of cotton–SNPs fibres showed effective performance against pathogenic bacteria and fungi. The method is biogenic, environmentally benign, rapid, and cost‐effective, producing highly biocompatible antimicrobial coating required for the healthcare industry.Inspec keywords: cotton, health care, nanoparticles, coatings, silver, fibres, nanofabrication, scanning electron microscopy, X‐ray chemical analysis, atomic emission spectroscopy, plasma applications, microorganisms, biotechnologyOther keywords: biocompatible antimicrobial cotton fibre coating, healthcare industry, bioorganic‐coated silver nanoparticle synthesis, biogenically fabricated silver nanoparticle, SNP, leaf extraction, Vitex negundo Linn, diffuse reflectance spectroscopy, scanning electron microscopy, nanoparticle tracking analysis, energy dispersive X‐ray spectrometry, inductively coupled plasma atomic emission spectrometry, uniformly distributed spherical agglomerate, antimicrobial assay, pathogenic bacteria, fungi, Ag     

Influence of residual thermal stresses on fatigue crack growth life of discontinuous reinforcements in metal matrix composites

The fatigue life prediction model based on crack propagation from micro-structural features is derived and presented for planar and randomly oriented Discontinuous Reinforced Metal Matrix Composites (DRMMCs). The model contains the influence of micro-structural properties such as aspect ratio, volume fraction of particle/fibre and constraint between particle and the matrix. The effect of residual thermal stresses generated within the matrix during development of composite is considered. The particle/fibre plays a dominant role in the development of the cyclic plastic zone size ahead of the crack tip; moreover, it enhances the cyclic plastic deformation characteristics of DRMMC. The theoretical model-based evaluations for low cycle fatigue in DRMMCs are within the proximity of the experimental results.     

Development,optimization, and characterization of a novel tea tree oil nanogel using response surface methodology

Purpose: To develop and optimize nanoemulsion (NE)-based emulgel (EG) formulation as a potential vehicle for topical delivery of tea tree oil (TTO).

Methodology: Central composite design was adopted for optimizing the processing conditions for NE preparation by high energy emulsification method viz. surfactant concentration, co-surfactant concentration, and stirring speed. The optimized NE was developed into emulgel (EG) using pH sensitive polymer Carbopol 940 and triethanolamine as alkalizer. The prepared EG was evaluated for its pH, viscosity, and texture parameters, ex vivo permeation at 37?°C and stability. Antimicrobial evaluation of EG in comparison to conventional gel and pure TTO was also carried out against selected microbial strains.

Results and discussion: Optimized NE had particle size and zeta potential of 16.23?±?0.411?nm and 36.11?±?1.234?mV, respectively. TEM analysis revealed the spherical shape of droplets. The pH of EG (5.57?±?0.05?) was found to be in accordance with the range of human skin pH. EG also illustrated efficient permeation (79.58?μL/cm²) and flux value (J_SS) of 7.96?μL cm²/h through skin in 10?h. Viscosity and texture parameters, firmness (9.3?±?0.08?g), spreadability (2.26?±?0.06?mJ), extrudability (61.6?±?0.05?mJ), and adhesiveness (8.66?±?0.08?g) depict its suitability for topical application. Antimicrobial evaluation of EG with same amount of TTO as conventional gel revealed broader zones of growth inhibitions against all the selected microbial strains. Moreover, EG was also found to be nonirritant (PII 0.0833). These parameters were consistent over 90 d.

Conclusion: TTO EG turned out to be a promising vehicle for the topical delivery of TTO with enhanced therapeutic efficacy.