Chemical Composition and Physical Properties of High Oleic Safflower Oils (Carthamus tinctorius,Var. CW88-OL and CW99-OL)

Chemical composition and physical properties of CW88‐OL and CW99‐OL cultivars of high oleic safflower seeds and their hexane‐extracted oils were determined. Dry‐based seed composition of CW88‐OL and CW99‐OL was: moisture = 4.29 and 4.23 %, oil = 42.29 and 46.44 %, Crude protein = 20.94 and 16.41 %, neutral detergent fiber = 28.11 and 28.49 %, ash = 1.55 and 2.01 %, phosphorus content = 2033 and 3995 mg/kg, respectively. Major fatty acids in oils were ~78 % oleic (O), ~13 % linoleic (L), ~5 % palmitic (P) and ~2 % stearic (St) acids, for both cultivars. The main triacylglycerols were OOO (~50 %), OOL (~20 %), SOL + OPO (~10 %), and LLP (~5 %). The oil composition of CW88‐OL and CW99‐OL in main minor components was: α‐tocopherol = 582 and 551 mg/kg, total sterols = 3996 and 3362 mg/kg, phospholipids = 22 and 21 mg/kg and wax content = 70 and 74 mg/kg. For both cultivars, density and viscosity of the oils between 25 and 55 °C varied from 903.4 to 912.6 kg/m³ and 63 to 23 mPa.s showing linear and exponential behaviors, respectively. The refractive index was 1.4694. The CIELab color parameters were: 89.69 and 89.53 (L*), ?3.72 and ?3.07 (a*), and 47.28 and 47.78 (b*) (CW88‐OL and CW99‐OL, respectively). Thus, the high oil content of the seeds and nutritional quality of the oil accompanied by low levels of waxes and phospholipids makes the cultivars studied promising for producers and consumers.     

Methods for characterizing plant fibers

The effectiveness of different microscopy techniques for measuring the dimensions of ultimate fibers from harakeke (Phormium tenax, New Zealand flax) was investigated using a factorial experimental design. Constant variables were geographical location, location of specimens along the leaf, season (winter), individual plant, a fourth leaf from a north-facing fan, age of plant, and cultivars (two). Experimental variables were microscopy techniques and measurement axis. Measurements of width and length of harakeke ultimate fibers depended on the microscopic preparation/technique used as well as the cultivar examined. The best methods were (i) transverse sections of leaf specimens 4 microm thick, embedded in Paraplast and observed using light microscopy, and (ii) nonfixed ultimate fibers observed using scanning electron microscopy.     

Complexation Hydrogels for the Oral Delivery of Growth Hormone and Salmon Calcitonin

The hydrogel system of poly(methacrylic acid-co-N-vinyl pyrrolidone) was evaluated for use as an oral delivery system for growth hormone and salmon calcitonin. These proteins were selected because of their therapeutic importance and the insight provided by evaluating the delivery of a therapeutic agent with a high molecular weight (growth hormone) and a drug with a high isoelectric point (salmon calcitonin). Growth hormone loading and release studies were performed for both P(MAA-co-NVP) and P(MAA-g-PEG). Loading efficiencies for the respective systems were 50.9 ± 1.8% and 57.8 ± 4.1%; weight incorporation of the protein was determined to be 3.5 ± 0.1% and 4.0 ± 0.3%. At pH 7.4, growth hormone release of 90% occurred within 45 min for P(MAA-co-NVP) microparticles; 90% release was not achieved with P(MAA-g-PEG) microparticles until 180 min. At pH 1.2, no release occurred from P(MAA-co-NVP) microparticles but 10% release occurred from P(MAA-g-PEG) microparticles. Salmon calcitonin loading and release were shown to be affected by the negative charges of deprotonated MAA; for systems with monomer molar feed ratios of 4:1, 1:1 and 1:4 MAA:NVP, loading efficiencies were determined to be 70.6 ± 3.0%, 25.3 ± 1.2%, and 1.6 ± 1.3%. Salmon calcitonin release was minimal from the copolymer with 4:1 MAA:NVP monomer feed at pH 7.4. The release improved when the pH was raised above physiological levels. These studies confirmed that P(MAA-co-NVP) was an effective oral delivery system for high molecular weight drugs, but improvements are needed before the system could be utilized for high isoelectric point therapeutic delivery.     

Synthesis of High Coercivity Core–Shell Nanorods Based on Nickel and Cobalt and Their Magnetic Properties

Hybrid magnetic nanostructures with high coercivity have immense application potential in various fields. Nickel (Ni) electrodeposited inside Cobalt (Co) nanotubes (a new system named Ni @ Co nanorods) were fabricated using a two-step potentiostatic electrodeposition method. Ni @ Co nanorods were crystalline, and they have an average diameter of 150 nm and length of ~15 μm. The X-ray diffraction studies revealed the existence of two separate phases corresponding to Ni and Co. Ni @ Co nanorods exhibited a very high longitudinal coercivity. The general mobility-assisted growth mechanism proposed for the growth of one-dimensional nanostructures inside nano porous alumina during potentiostatic electrodeposition is found to be valid in this case too.     

Effect of ractopamine level, gender, and duration of ractopamine on belly and bacon quality traits

The objective was to determine belly and bacon quality traits in pigs fed ractopamine (RAC) for various durations during finishing. A 2 × 3 × 2 factorial arrangement was used with barrows and gilts, fed RAC levels of 0.0, 5.0, or 7.4 ppm, for 21 or 28 d prior to harvest. Bellies were fabricated and measured for length, thickness, firmness, and processing yields. Once processed, 1.27 cm slices were removed at 25%, 50%, and 75% the distance from the blade end, packaged and digitally imaged using a Chem1 Genius² Bio Imaging System. Total slice area (TA), total slice length (TL), secondary lean length (SL), secondary lean area (SA), and percent lean area (TA – all lean components = LA) were determined by tracing images in Adobe Photoshop Elements. A composite sample from the three slices was used for proximate analysis to determine moisture and fat composition for each belly. Feeding RAC increased belly yield, TA, TL, SA, and LA (P < 0.05), but did not alter moisture or fat composition (P > 0.05). Gilts had decreased firmness and higher pump uptakes compared to barrows (P < 0.05). Additionally gilts had increased TL, SL, and LA with lower fat and higher moisture content (P < 0.05). RAC feeding duration had no significant effect on belly or bacon quality traits (P > 0.05), furthermore, no interactions were found to be significant (P > 0.05). RAC administration during finishing resulted in improved belly and bacon yields with no negative effects on the quality traits evaluated.     

Red clover (Trifolium pratense L.) isoflavones: determination of concentrations by plant stage,flower colour,plant part and cultivar

BACKGROUND: Red clover (Trifolium pratense L.), a widely used fodder, has recently received considerable interest as a valuable source of isoflavones for many health‐related applications. The aim of this study was to analyse the concentrations of four isoflavones, daidzein, genistein, formononetin and biochanin A, in extracts of leaves, stems, roots and different coloured flowers from red clover by high‐performance liquid chromatography and to determine the antifungal activities of the extracts. RESULTS: Among greenhouse‐grown samples the highest amounts of daidzein and genistein were found in petioles (0.11–0.28 and 0.30–0.54 mg g^?1 respectively), while leaves were rich in formononetin and biochanin A (5.57–9.05 and 10.94–14.59 mg g^?1 respectively). High formononetin concentrations were found in roots, but very little biochanin A. Among field‐grown samples the highest concentrations of daidzein and genistein were detected in stems collected in August (0.24 and 0.55 mg g^?1 respectively), while the highest amounts of formononetin and biochanin A were found in young leaves collected in June (7.47 and 9.69 mg g^?1 respectively). Most of the extracts inhibited the growth of Drechslera teres, while the root extract showed the strongest effect against Microdochium nivale. CONCLUSION: High levels of bioactive compounds found not only in inflorescences but also in roots, leaves and stems suggest that red clover may be an inexpensive and valuable resource for many applications. Copyright © 2007 Society of Chemical Industry     

The in situ physiology of "Nostocoida limicola" II, a filamentous bacterial morphotype in bulking activated sludge, using fluorescence in situ hybridization and microautoradiography.

The in situ physiology of the actinobacterial bulking and foaming filamentous bacterium "Nostocoida limicola" II was studied by fluorescence in situ hybridization/microautoradiography. Substrate assimilation patterns of pure cultures of this bacterium were different to those seen in activated sludge biomass samples. There was no evidence to suggest that "N. limicola" II preferred hydrophobic substrates, but evidence was produced to support the view that it is metabolically active under anaerobic conditions in activated sludge.     

The curriculum in and for a democratic society 1

The purpose of this article is to offer an analysis of the political and social role of the curriculum in a modern democratic society. It seeks to show how the assumptions embedded in inherited curriculum ideologies are impeding the potential of the curriculum in modern democratic societies from becoming a curriculum 'for democracy', that is a curriculum which would be constitutive of a more democratic form of social life.     

羊毛表面改性对染色性能的作用

比较过一硫酸盐氧化表面改性和DCCA氯化表面改性对羊毛染色性能的作用效果,探讨弱酸性染料、中性染料和毛用活性染料在不同改性羊毛织物上的上染率和上染速率。结果表明:羊毛的表面改性能够削弱染料的扩散壁垒,改善各种染料在羊毛纤维上的染色性能。