Bonelike Hydroxyapatite Induction by a Gel-Derived Titania on a Titanium Substrate

Gel-derived titania coating on commercial pure (c.p.) titanium induces hydroxyapatite formation onto its surface from a simulated body fluid (SBF, a metastable calcium phosphate solution). The induced apatite is similar to bone apatite in that it is poorly crystallized, calcium-deficient, and carbonate-containing. Furthermore, the carbonate (CO^2–3) groups go into the apatite lattice and lie at the positions of PO^3–4 and OH^– to replace these ionic groups, resembling the (CO^2–3) groups of bone apatite. Therefore, the apatite induced by the gel-derived titania is said to be bonelike. A chemical stimulation, stemming from abundant hydroxyl groups and negative charges at the surface of the titania gel, is believed to be responsible for the bonelike apatite induction. The potential of bone-bonding is predicted for the gel-derived titania, for it is an efficient bonelike apatite inducer in the SBF.     

Degradation of Leaf Litter Phenolics by Aquatic and Terrestrial Isopods

To investigate species-specific decomposition rates of litter from native (Quercus faginea) and introduced (Eucalyptus globulus) tree species in Portugal, we monitored changes in the phenolic signature of leaf litter during decomposition as mediated by an aquatic, Proasellus coxalis (Isopoda: Asellota), and two terrestrial, Porcellio dispar and Eluma caelatum (Isopoda: Oniscidea), detritivores. Although the litter of Eucalyptus and Quercus did not differ in overall protein precipitation capacity, we detected differences in terms of contents of particular phenolic compounds and phenol oxidation products. Accordingly, we observed food-specific consumption rates in Proasellus, but not in the terrestrial isopods. Proasellus digested Eucalyptus at significantly higher rates than Quercus, whereas the opposite was the case for Eluma, and Porcellio digested both litter types equally well. Despite slight differences in detail, effects of Proasellus on changes in the signature of litter phenolics were similar for both litter types, whereas terrestrial isopods—Porcellio and Eluma, although they differed from each other—digestively degraded phenolic compounds in Eucalyptus and Quercus litter, respectively, in different ways. Overall, however, degradation of litter phenolics was similarly effective on both litter types. From these data, we conclude that decomposition of Eucalyptus litter does not proceed more slowly than of litter from native Portuguese trees.     

Influence of grafted polypropylene on the mechanical properties of mineral‐filled polypropylene composites

The purpose of this work was to study how mineral fillers would behave in a polypropylene (PP) matrix when PP modified with maleic anhydride (MA) and/or itaconic acid (IA) was used as a coupling agent in the preparation of mineral‐filled PP composites. The composites were characterized with tensile mechanical measurements and morphological analysis. The optimum amount of the coupling agent to be used to obtain composites with improved mechanical properties was established. The results indicated that these coupling agents enhanced the tensile strength of the composites significantly, and the extent of the coupling effect depended on the nature of the interface that formed. The incorporation of coupling agents enhanced the resistance to deformation of the composite. The behavior of IA‐modified PP as a coupling agent was similar to that of a commercial MA‐modified PP for the filled PP composites. Evidence of improved interfacial bonding was revealed by scanning electron microscopy studies, which examined the surfaces of fractured tensile test specimens; their microstructures confirmed the mechanical results with respect to the observed homogeneous or optimized dispersion of the mineral‐filler phase in these composites. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2343–2350, 2007     

Preparation of poly(ethylene terephthalate) nanocomposite fibers incorporating a thermally stable organoclay

Summary A series of poly(ethylene terephthalate) (PET) nanocomposites containing organically-modified mica (HB-Mica) were prepared by in-situ interlayer polymerization of dimethyl terephthalate and ethylene glycol. The PET nanocomposites, which contained organoclay loadings of 0 to 2 wt %, were melt-spun to produce monofilaments with various draw ratios. Some of the clay particles appeared well dispersed within the PET matrix, while others were found to form agglomerates with sizes greater than 20 nm. The addition of a small amount of organoclay was sufficient to improve the thermo-mechanical properties of the PET hybrid fibers. Both the thermal stability and the mechanical tensile properties increased with increasing clay content for draw ratios of 1–16.     

Selective O-Alkylation Reaction of Hydroquinone with Methanol over Cs Ion-Exchanged Zeolites

O-alkylation reaction of hydroquinone with excess methanol was performed by using alkali metal ion-exchanged zeolite catalysts in a slurry type reactor to substitute the solid zeolite catalysts for the homogeneous liquid phase catalysts. This was also done to produce selectively mono-alkylated 4-methoxyphenol, a valuable intermediate for the perfume, flavor, food and photo industries. The effects of the basicity of various zeolites and reaction conditions such as temperature, reaction time and the amount of catalyst on the catalytic activity and selectivity were tested to maximize the yield of 4-methoxyphenol. Thus far, 84% selectivity at 95% conversion of hydroquinone was obtained at the optimum reaction conditions (240 ‡C, reaction with 0.6 g catalyst for 16 h), which was thought to result from the strong basic property and shape selectivity of the Cs ion-exchanged NaX zeolite.     

Simulation of the nitrogen balance in the soil and a winter wheat crop

A simulation model for winter wheat growth, crop nitrogen dynamics and soil nitrogen supply was tested against experimental data. When simulations of dry matter production agreed with measurements, nitrogen uptake was simulated accurately. The total amount of soil mineral nitrogen as well as the distribution of mineral nitrogen over the various soil layers were generally simulated well, except for experiments in which fertilizer was applied late in spring. In these experiments, applied nitrogen disappeared because it could not be accounted for by the model. Some explanations for this disappearance are briefly discussed.     

基于IOS平台的小型仓储管理系统设计

随着数字化、信息化技术在物流领域应用的飞速发展,各种各样的仓储管理系统日益受到关注。本文介绍的基于IOS平台的小型仓储管理系统是利用IOS设备对货物信息进行采集,通过SQLite数据库技术、ZXing库等软硬件方式构建的业务系统,可以较好地适应中小规模用户数据交互的需求。同时,系统具备造价低廉、操作便捷等优点。     

The mechanism and kinetics of the electrochemical cleavage of azo bond of 2-hydroxy-5-sulfophenyl-azo-benzoic acids

The electrochemical reduction of 2-hydroxy-5-[(4-sulfophenyl)azo]benzoic acid, 2-hydroxy-5-[(3-sulfophenyl)azo]benzoic acid, 2-hydroxy-5-[(2-sulfophenyl)azo]benzoic acid and 2-hydroxy-5-azo-benzoic acid has been carried out in aqueous solutions at glassy carbon electrode using cyclic voltammetry and chronoamperometry. The position of sulfo substituent relative to azo bridge as well as pH of the solution have significant impact on the electrochemical behavior of these compounds. It has been proposed that these compounds are reduced predominantly as hydrazone tautomers resulting in corresponding hydrazo compounds. The overall electrochemical reduction follows DISP2 mechanism, ultimately leading to the 5-amino salicylic acid and sulfanilic acid. The rate determining step is the homogenous redox reaction between intermediate hydrazo compound and 5-amino salicylic acid quinoneimine. The mechanism is proposed in which activated complex of 5-amino salicylic acid quinoneimine and intermediate hydrazo compound is formed with the simultaneous loss of one proton.     

Functional properties of a protein product from Caryodendron orinocense (Barinas nut)

The functional properties of Caryodendron orinocense protein product were investigated and compared with those of soybean (Glycina maxima). The product protein content was 24.47 g/100 g (Nx6.25). Solubility increased at both sides of the isoelectric point (pH 4.0) and with increased NaCl concentration up to 0.5M. Compared with soybean flour (50% protein), the protein product exhibited higher water and oil absorption, but lower emulsifying activity, emulsion stability, foaming capacity, and foam stability, the last one increase at higher pH. Emulsifying activity, foaming capacity, and foam stability were ionic strength dependent. C. orinocense protein product increased its emulsifying activity steadily from 0.05M to 0.75M NaCl, while it remained almost constant for soybean flour. Foaming capacity increased drastically at pH 10. The minimum time and concentration to form a gel was 20% in 4 min and 10% in 8 min for the Caryodendron protein product and soybean flour, respectively. The bulk density was 0.5056+/-0.0041 g/mL.