Fly Ash-based Geopolymer Lightweight Concrete Using Foaming Agent

In this paper, we report the results of our investigation on the possibility of producing foam concrete by using a geopolymer system. Class C fly ash was mixed with an alkaline activator solution (a mixture of sodium silicate and NaOH), and foam was added to the geopolymeric mixture to produce lightweight concrete. The NaOH solution was prepared by dilute NaOH pellets with distilled water. The reactives were mixed to produce a homogeneous mixture, which was placed into a 50 mm mold and cured at two different curing temperatures (60 °C and room temperature), for 24 hours. After the curing process, the strengths of the samples were tested on days 1, 7, and 28. The water absorption, porosity, chemical composition, microstructure, XRD and FTIR analyses were studied. The results showed that the sample which was cured at 60 °C (LW2) produced the maximum compressive strength for all tests, (11.03 MPa, 17.59 MPa, and 18.19 MPa) for days 1, 7, and 28, respectively. Also, the water absorption and porosity of LW2 were reduced by 6.78% and 1.22% after 28 days, respectively. The SEM showed that the LW2 sample had a denser matrix than LW1. This was because LW2 was heat cured, which caused the geopolymerization rate to increase, producing a denser matrix. However for LW1, microcracks were present on the surface, which reduced the compressive strength and increased water absorption and porosity.     

Photoluminescence characterization and heat treatment effect on luminescence behavior of BaTa2O6:Dy3+ phosphor

Undoped and Dy³⁺‐doped barium tantalate phosphors were synthesized by the solid‐state reaction method at 1425°C. Also, 10 mol% Dy³⁺‐doped BaTa₂O₆ was sintered between 1150 and 1425°C in order to determine temperature effect on structural and luminescence properties. Afterwards, they were characterized by XRD, SEM‐EDS and photoluminescence (PL) analyses. PL spectra exhibited the excitation peaks between 300 and 440 nm. Two typical emissions were observed at 486.2 nm (blue) and 577.7 nm (yellow) due to the ⁴F_9/2→⁶H_15/2 and ⁴F_9/2→⁶H_13/2 transitions, respectively. Emission intensities increased with increasing doping concentration of Dy³⁺ up to 10 mol% and then decreased due to the concentration quenching effect. Moreover, depending on the increase in heat treatment temperature, the intensity of emission reached maximum at 1425°C. The calculated CIE chromaticity coordinates of phosphors located in the white light region.     

Polyhedral oligomeric silsesquioxane-based hybrid networks obtained via thiol-epoxy click chemistry

A series of hybrid networks based on polyhedral oligomeric silsesquioxane (POSS) were prepared by thiol-epoxy click reaction using commercially available octakis-glycidyl-POSS (G-POSS), trimethylolpropane triglycidyl ether, and trimethylolpropane tris(3-mercaptopropionate) as monomers. The click reaction was simply catalyzed by lithium hydroxide which proceeded readily at ambient conditions in very good yields. The incorporation of G-POSS into the network was clearly determined by transmission electron microscopy, FTIR, and ¹H-NMR spectroscopy techniques performed with a model study using 1-butane thiol and G-POSS molecules. The homogeneous distribution of G-POSS up to 5 wt% in the hybrid network was apparently confirmed by morphological investigations. By increasing G-POSS content higher than 5 wt%, the heterogeneous dispersion of G-POSS was determined from the tensile strength measurements. The significant decrease in tensile strength was possible due to the agglomeration of G-POSS. On the other hand, thermal properties of hybrid networks were compared together by thermogravimetric analyses, where all samples exhibited one-step degradation in the range of 220–500 °C. The thermal decomposition of hybrid network led to complete degradation of the organic part and favored the formation of stable carbonaceous and inorganic residues as char. Thus, the char yields of hybrid networks were increased to 6.2, 7.8, 10.1, 12.7, and 15.1% by G-POSS loadings from 0 to 15 wt%. This improvement was also a proof of the incorporation of G-POSS into the hybrid networks that resulted in high heat-resistant POSS-based hybrid networks compared to a sample without G-POSS.     

Determination of mechanical properties of polymeric microspheres used in controlled drug delivery systems by nanoindentation

In this study, we synthesized poly (vinyl acetate-co-divinyl benzene) microspheres with various monomer/cross-linker contents for oral/topical sustained drug release applications and determined the micromechanical properties by nanoindentation. Compression elastic moduli of materials were calculated by using the limited depth of indentation according to Hertz elastic deformation model and presented as the histogram of multiple data. In terms of drug release practices, poly (VAc-co-DVB) microspheres with a high DVB content, especially in topical applications, are expected to carry drugs under mechanical stresses of less than 1.0 GPa.     

Masking the Peroxidase-Like Activity of the Molybdenum Disulfide Nanozyme Enables Label-Free Lipase Detection

Two-dimensional MoS₂ nanoparticles (2D-nps) exhibit artificial enzyme properties that can be regulated at bio-nanointerfaces. We discovered that protein lipase is able to tune the peroxidase-like activity of MoS₂ 2D-nps, offering low-nanomolar, label-free detection and identification in samples with unknown identity. The inhibition of the peroxidase-like activity of the MoS₂ 2D-nps was demonstrated to be concentration dependent, and as low as 5 nm lipase was detected with this approach. The results were compared with those obtained with several other proteins that did not display any significant interference with the nanozyme behavior of the MoS₂ 2D-nps. This unique response of lipase was characterized and exploited for the successful identification of lipase in six unknown samples by using qualitative visual inspection and a quantitative statistical analysis method. The developed methodology in this approach is noteworthy for many aspects; MoS₂ 2D-nps are neither labeled with a signaling moiety nor modified with any ligands for signal readout. Only the intrinsic nanozyme activity of the MoS₂ 2D-nps is exploited for this detection approach. No analytical equipment is necessary for the visual detection of lipase. The synthesis of the water-soluble MoS₂ 2D-nps is low costing and can be performed in bulk scale. Exploring the properties of 2D-nps and their interactions with biological materials reveals highly interesting yet instrumental features that offer the development of novel bioanalytical approaches.     

Recent Developments and Applications of Ionic Liquids in Gas Separation Membranes

Flue gas emissions and the harmful effects of these gases urge to separate and capture these unwanted gases. Ionic liquids due to negligible vapor pressure, thermal stability, and wide electrochemical stability have expanded its application in gas separations. A comprehensive overview of the recent developments and applications of ionic liquid membranes (ILMs) for gas separation is given. The three general classifications of ILMs, such as supported ionic liquid membranes (SILMs), ionic liquid polymeric membranes (ILPMs), and ionic liquid mixed‐matrix membranes (ILMMMs) along with their applications, for the separation of various mixed gases systems is discussed in detail. Furthermore, issues, challenges, computational study, and future perspectives for ILMs are also considered.     

Microstructure of Reaction Zone Formed During Diffusion Bonding of TiAl with Ni/Al Multilayer

In this article, the characterization of the interfacial structure of diffusion bonding a TiAl alloy is presented. The joining surfaces were modified by Ni/Al reactive multilayer deposition as an alternative approach to conventional diffusion bonding. TiAl substrates were coated with alternated Ni and Al nanolayers. The nanolayers were deposited by dc magnetron sputtering with 14 nm of period (bilayer thickness). Joining experiments were performed at 900 °C for 30 and 60 min with a pressure of 5 MPa. Cross sections of the joints were prepared for characterization of their interfaces by scanning electron microscopy (SEM), transmission electron microscopy (TEM), scanning transmission electron microscopy (STEM), high resolution TEM (HRTEM), energy dispersive x-ray spectroscopy (EDS), and electron backscatter diffraction (EBSD). Several intermetallic compounds form at the interface, assuring the bonding of the TiAl. The interface can be divided into three distinct zones: zone 1 exhibits elongated nanograins, very small equiaxed grains are observed in zone 2, while zone 3 has larger equiaxed grains. EBSD analysis reveals that zone 1 corresponds to the intermetallic Al₂NiTi and AlNiTi, and zones 2 and 3 to NiAl.     

Flow patterns and oil—water dispersion in a 0.38 m diameter oscillatory baffled column

We report our experimental flow visualization observations of flow patterns and experimental oil‐water dispersion measurements in an oscillatory baffled column (OBC) of an internal diameter 380 mm. Both types of experiments were carried out covering an identical range of oscillation frequencies, amplitudes, orifice diameters and baffle spacings. The flow visualization observations show that eddy mixing has been achieved in the pilot OBC and the intensity of which is largely dependent on the operational and geometrical parameters tested, which is similar to that in a smaller scale OBC. The scale‐up correlation was found to be linear. The oil‐water dispersion measurements show that the degree of the dispersion depends significantly on the oscillation frequency and amplitude with an increase in either leading to an increase in dispersion. The effect of the orifice diameter on the oil—water dispersion is also evident, but the effect of the baffle spacing is much weaker. Based on the experimental data we have established a correlation relating the degree of oil—water dispersion to the power input to the system. We have also compared the power requirement to achieve a complete dispersion in the pilot OBC with that in a bench scale OBC of 50 mm diameter and found that the energy dissipation is more economical in the large scale application.     

Polymerization of isoprene in n-heptane with triethylaluminum–titanium tetrachloride catalyst. I. Effect of Al/Ti ratio on stereoregularity,conversion, molecular weight,and molecular weight distribution

The influence of the Al/Ti ratio of the heterogeneous Ziegler–Natta catalyst system AlEt₃–TiCl₄ on the isoprene polymerization in n-heptane at 30°C in a bench scale reactor was investigated. Each batch run consisted of 50 mL isoprene, 200 mL n-heptane with 0.45 and 0.5g catalyst. Conversion of isoprene and molecular weights of polyisoprene increased with increasing Al/Ti ratio, reaching their maxima values at 1.0 and 1.2, respectively. Conversion and molecular weights decreased remarkably at a higher ratio of Al/Ti. As this ratio decreases from the value of 1.2 to 0.4, the cis1,4 content in polyisoprene decreased from 97 to 25%. When the ratio of Al/Ti increased from 1.2 to 2.2 the cis-1,4 structure of polyisoprene decreased from 97 to 85%.