Non cell adhesive photopolymerized cross-linked layers (I): synthesis and characterization

The aim of this study is to design an effective hydrogel, which has good potential for application in the field of tissue regeneration. Ultimately, the polymeric biomaterial will be used as a bottom, non-cell adhering layer of a polymeric scaffold, which will inhibit the adhesion and proliferation of fibroblast cells. A series of terpolymer hydrogels were prepared from MMA/HPOEM/MePOEM monomers based on varying formulations. The gels were polymerized via free radical polymerization under UV and characterized by TGA, DSC and FTIR studies. Furthermore, the double bond conversion, gel content and swelling properties of the polymer were analyzed and correlated to its crosslinking density, which revealed details about the hydrogels character. Finally, cell culture experiments were used to compare the UV-cured polymer to its thermally derived non-functionalized polymer of the same formulation. Inverted optical microscopy was used to demonstrate cell-resistance of both materials with respect to a control Tissue Culture PolyStyrene plate. ©2003 Kluwer Acadamic Publishers     

Ultrastructural changes in articular cartilage in rheumatoid arthritis

Electron microscope studies of the articular cartilages removed in the course of the operation on 6 patients with rheumatoid arthritis were carried out. The processes of destruction of chondrocytes and the cartilaginous matrix in different regions of the articular cartilage were traced. In the surface areas of the drastically changed cartilage there were observed leucocytes of the synovial fluid, and in deeper areas--disintegration of chondrocytes and extracellular disposition of lysosomes and altered organellas, destroyed cartilaginous cells. In these areas destruction of collagenous fibres was particularly intensive. In areas of the tissue remote from the destuction hypertrophy of chondrocytes due to hyperplasia of various organellas and the Golgi complex in particular were noted. In the Golgi zone granules of glycogen were detected. No mitoses were observed. Apparently, the enzymatic destruction of the cartilaginous matrix in rheumatoid arthritis could proceed at the expense of the activazation of the synovial fluid lysosomes and lysosomes of chondrocytes themselves. A reparative regeneration of the disintegrating matrix was realized mainly because of hypertrophy of the functionally preserved chondrocytes.     

Central poststroke pain and Wallenberg''s lateral medullary infarction: frequency, character, and determinants in 63 patients

BACKGROUND: Questionnaire-based surveys from several countries have consistently detected adverse health associated with home dampness and mould growth. METHODS: To test the validity of questions commonly used to indicate the presence of indoor mould, questionnaires were administered in 403 homes where dust samples were taken for viable fungi and air samples for ergosterol. RESULTS: Geometric mean concentrations of the total viable fungi were 255 (SE 116) x 10(3) CFU/g when mouldy odours were reported and 155 (SE 55) when odours were not reported (P = 0.01). Similarly, reported water damage was associated with a 50% increase (P = 0.06). Geometric mean concentrations of the predominantly indoor-source fungi, Aspergillus plus Penicillium, were twice as high when mould or mildew was reported than when not mentioned (P = 0.01). The presence of reported mould or water damage was unrelated to the presence of detectable levels of ergosterol. There was evidence for reporting bias: in the presence of low concentrations of viable fungi in dust, respondents reporting allergies were more likely to report visible mould growth (odds ratio [OR] = 1.8, 95% confidence interval [CI]: 0.9-3.5, P = 0.10. In the presence of elevated concentrations of dust fungi, respondents who smoked were less likely to report visible mould growth, (OR = 0.4, 95% CI: 0.2-0.7, P = 0.005). CONCLUSIONS: Reported mould, water damage, and mouldy odours were associated with elevated levels of indoor fungi. However, inaccuracy was high and there was evidence of a systematic reporting bias. Future research should concentrate on developing accurate objective measures of exposure to fungi, and then use this information to develop valid questionnaires. Currently, objective measures not questionnaires, are recommended to clarify the health effects of indoor fungi.     

Effects of age, breast density, ethnicity, and estrogen replacement therapy on screening mammographic sensitivity and cancer stage at diagnosis: review of 183,134 screening mammograms in Albuquerque, New Mexico

PURPOSE: To examine how common patient factors affect screening mammographic sensitivity and cancer stage at diagnosis. MATERIALS AND METHODS: The authors used a population-based database of 183,134 screening mammograms and a statewide tumor registry to identify 807 breast cancers detected at screening mammography. RESULTS: Sensitivity varied significantly with ethnicity, use of estrogen replacement therapy, mammographic breast density, and age. Sensitivity was 54% (13 of 24) in women younger than 40 years, 77% (121 of 157) in women aged 40-49 years, 78% (224 of 286) in women aged 50-64 years, and 81% (277 of 340) in women older than 64 years. Sensitivity was 68% (162 of 237) for dense breasts and 85% (302 of 356) for nondense breasts and 74% (180 of 244) in estrogen replacement therapy users and 81% (417 of 513) in nonusers. Sensitivity was most markedly reduced with the combination of dense breasts and estrogen replacement therapy use; there was little difference when only one factor was present. Median cancer size and the percentage of early cancers showed little change with any factors. CONCLUSION: Age is a minor determinant of mammographic sensitivity in women aged 40 years or older. Sensitivity is substantially decreased with the combination of higher breast density and estrogen replacement therapy use. There was not a notable shift in cancer outcomes in the groups with lower mammographic sensitivity. These data do not support different screening recommendations in women aged 40-49 years or in estrogen replacement therapy users.     

Structural evolution and dopant occupancy preference of yttrium-doped potassium sodium niobate thin films

Sodium potassium niobate (KNN) is the most promising candidate for lead-free piezoelectric material, owing to its high Curie temperature and piezoelectric coefficients among the non-lead piezoelectric. Numerous studies have been carried out to enhance piezoelectric properties of KNN through composition design. This research studied the effects of yttrium concentrations and lattice site occupancy preference in KNN films. For this research, the yttrium-doped KNN thin films (mol% = 0, 0.1, 0.3, 0.5, 0.7 and 0.9) were fabricated using the sol-gel spin coating technique and had revealed the orthorhombic perovskite structures. Based on the replacement of Y³⁺ ions for K⁺/ Na⁺ ions, it was found that the films doped with 0.1 to 0.5 mol% of yttrium had less lattice strain, while films with more than 0.5 mol% of Y³⁺ ions had increased strain due to the tendency of Y³⁺ to occupy the B-site in the perovskite lattice. Furthermore, by analysing the vibrational attributes of octahedron bonding, the dopant occupancy at A-site and B-site lattices could be identified. O-Nb-O bonding was asymmetric and became distorted due to the B-site occupancy of yttrium dopants at high dopant concentrations of >0.5 mol%. Extra conduction electrons had resulted in better resistivity of 2.153× 10⁶ Ω at 0.5 mol%, while higher resistivity was recorded for films prepared with higher concentration of more than 0.5 mol%. The introduction of Y³⁺ improved the grain distribution of KNN structure. Further investigations indicated that yttrium enhances the surface smoothness of the films. However, at high concentrations (0.9 mol%), the yttrium increases the roughness of the surface. Within the studied range of Y³⁺ _, the film with 0.5 mol% Y³⁺ represented a relatively desirable improvement in dielectric loss, tan δ and quality factor, Q_m.     

Transient analysis of diffusion least‐mean squares adaptive networks with noisy channels

In this paper, we study the effect of noisy channels on the transient performance of diffusion adaptive network with least‐mean squares (LMS) learning rule. We first drive the update equation of diffusion LMS which incorporates the effects of noisy channels. Then, using the framework of fundamental weighted energy conservation relation, we derive closed‐form expressions for learning curves in terms of mean‐square deviation and excess mean‐square error. We also find the mean and mean‐square stability bounds of step‐size for diffusion LMS with noisy channels. We show that although noisy channels affect the performance of the diffusion LMS network, the stability bounds of the step‐size are the same form as in the ideal channels case. The derived closed‐form expressions are shown to provide a good match with values found by simulation. Copyright © 2011 John Wiley & Sons, Ltd.     

Automating the sizing of transistors in CMOS gates for low‐power and high‐noise margin operation

This paper presents an automatic method for sizing the transistors in CMOS gates. The method utilizes a feedback control system to efficiently optimize the transistor sizes in small and large fan‐in gates, with the primary goal of enhancing noise robustness (as characterized by the static noise margin). The gates retain their robustness under threshold‐voltage variations over a range of supply voltages. The optimized gates not only expend reduced power and energy, but also take up less area than the conventional ones. These multi‐faceted gains, however, do incur some performance loss. Copyright © 2014 John Wiley & Sons, Ltd.     

Tracking analysis of augmented complex least mean square algorithm

The augmented complex least mean‐square (ACLMS) algorithm is a suitable algorithm for the processing of both second‐order circular (proper) and noncircular (improper) signals. In this paper, we provide tracking analysis of the ACLMS algorithm in the non‐stationary environments. Using the established energy conservation argument, we derive a variance relation that contains moments that represent the effects of non‐stationary environment. We evaluate these moments and derive closed‐form expressions for the excess mean‐square error (EMSE) and mean‐square error (MSE). The derived expressions, supported by simulations, reveal that unlike the stationary case, the steady‐state EMSE, and MSE curves are not monotonically increasing functions of the step‐size parameter. We also use this observation to optimize the step‐size learning parameter. Simulation results illustrate the theoretical findings and match well with theory. Copyright © 2015 John Wiley & Sons, Ltd.     

Investigating the wicking behavior of micro/nanofibrous core-sheath PET–PAN yarn modified by dimethyl 5-sodium sulfoisophthalate

The present research aims at imparting an improved wicking ability to the recycled multifilament yarns by wrapping composite nanofibers to attain an efficient material for filtration purposes. Therefore, polyacrylonitrile nanofibers containing dimethyl 5-sodium sulfoisophthalate nanoparticles were wrapped around the recycled poly(ethylene terephthalate) yarn by means of a novel electrospinning technique. Several tests were performed to investigate the parameters affecting wicking rise and moisture regain of the samples. Taguchi method was used in two separate designs (with or without nanoparticles). Some factors such as polymer solution concentration, mass ratio of nanoparticles, take-up rate, and number of filaments were considered as the variable factors while yarn wicking rate and moisture regain were the response factors. It was found that the hydrophilic nature of nanoparticles together with the ultrafine structure of nanofibers provide yarns with enhanced wicking properties. Although solution concentration is the predominant factor in wicking rate of the yarns containing nanoparticles, the most effective factor in wicking rise and moisture regain for other cases is the number of filaments. The mechanism of nanoparticle effect on fluidic jet during electrospinning process is explained by theory of nanofluids stability which has never been validated experimentally in previous research studies. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 48185.     

Preparation of binary and hybrid epoxy nanocomposites containing graphene oxide and rubber nanoparticles: Fracture toughness and mechanical properties

Binary and hybrid epoxy nanocomposites modified with graphene oxide (GO) and core–shell rubbers (CSR) were synthesized via the solvent-exchange method. X-ray diffraction analysis and scanning electron microscopy of the samples showed a homogeneous dispersion of GO and CSR in the epoxy matrix. The tensile modulus and tensile strength of the samples modified with CSR decreased continuously with increasing CSR content; however, with the addition of only 0.05 phr GO to the neat epoxy and rubber-modified epoxy, these properties significantly increased. The use of GO and CSR individually improved the fracture toughness, but the impact of GO was greater. The simultaneous use of GO and CSR improved both the fracture toughness and the mechanical properties. Our investigation of the toughening mechanism indicated that crack deflection–bifurcation, crack pinning, and particle debonding–pullout in the presence of GO nanosheets and limited rubber particle cavitation contributed to fracture toughness improvement in the hybrid systems. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 46988.