普通快走丝线切割机间隙电压取样电路浅析

介绍了传统的间隙电压取样电路，指出了它存在的问题，简述了取样电路的发展方向。     

火焰原子吸收光谱法测定电缆绝缘护套中的铅

提出了用空气—乙炔原子吸收光谱法测定电缆绝缘护套中的铅含量。铅在0.00~11.00μg.ml-1(r=0.9991)范围内有良好的线性关系。本法的RSD≤3.17%,回收率在97.2%~103.2%之间。     

区域烧结法制备高温气体清洁用大尺寸陶瓷过滤管

用区域烧结在1 d内可完成高温气体清洁用1.5 m陶瓷过滤管的制备过程,区域烧结的优势是缩短研究和开发周期.目前,经过认真设计,已经完成区域烧结设备.多孔陶瓷件比致密陶瓷件更容易烧结成型,原因是多孔陶瓷在区域烧结期间可免除其收缩和变形.     

Effects of Radiation and Hydrogen on the Fracture Resistance of Borosilicate Glasses

In this study, short bar fracture toughness samples were used to determine the effects of radiation and hydrogen on the resistance to fracture of vitreous silica and four commercial borosilicate glasses. The results showed that neither exposure to 10¹⁰ rads of γ-radiation nor saturation to a room-temperature-equivalent exposure of 408 atm of hydrogen had an effect on fracture resistance. Nevertheless, when samples were saturated with hydrogen and then exposed to radiation, resistance to fracture increased significantly in some of the glasses. The increase in the resistance to fracture correlated directly with the increase in concentration of hydroxyl and hydride groups created by exposure to radiation and hydrogen. The concentration of these groups differs with glass composition and accounts for the difference in behavior between the types of glass studied.     

Studies of space-averaged mass transport in the FM01-LC laboratory electrolyser

Measurements of the mass transport limited current for the reduction of ferricyanide in 1M m potassium hydroxide and of copper(II) in 1.5 m sulphuric acid as a function of electrolyte flow rate are used to characterize the space-averaged mass transport properties of the FM01 laboratory electrolyser, with and without six types of polymer mesh turbulence promoters. In the absence of a promoter, the results followed the equation For the cell with the preferred turbulence promoter, the corresponding equation is Pressure drop data are also reported and it is confirmed that the presence of a turbulence promoter need not lead to a significant increase in the pressure drop over the reactor.     

The prediction of transport parameters in filamentous fermentation broths based on results obtained in pseudoplastic polymer solutions

Transport phenomena studies on single phase “model” fluids are of limited value in biochemical engineering if they cannot be translated to the heterogeneous systems encountered in real fermentation processes. In this paper we discuss the utility of polymer solutions as models of filamentous fermentation broths for evaluation of: pipeline friction factors and impeller power numbers (turbine and helical ribbon). To a first approximation, polymer solutions can serve as suitable models for the prediction of laminar flow pressure drop in pipelines and turbulent power consumption in stirred tanks. However, results obtained on polymer solutions do not directly apply to filamentous fermentation broths for predictions of laminar flow impeller power consumption and the transition point for turbulent flow in stirred tanks. These discrepancies are believed to result from the existence of a time dependent yield stress in filamentous fermentation broths.     

Automatic dimensional reduction and meshing of stiffened thin-wall structures

The creation of idealised, dimensionally reduced meshes for preliminary design and optimisation remains a time-consuming, manual task. A dimensionally reduced model is ideal for assessing design changes through modification of element properties without the need to create a new geometry or mesh. In this paper, a novel approach for automating the creation of mixed dimensional meshes is presented. The input to the process is a solid model which has been decomposed into a non-manifold assembly of smaller volumes with different meshing significance. Associativity between the original solid model and the dimensionally reduced equivalent is maintained. The approach is validated by means of a free-free modal analysis on an output mesh of a gas turbine engine component of industrial complexity. Extensions and enhancements to this work are also discussed.     

基于分层动态时间弯曲的序列相似性度量方法研究

为了更好地体现时间序列的形态特征,并探索更适合于较长时间序列之间相似性度量的方法,在动态时间弯曲算法的基础上进行改进,提出了基于分层动态时间弯曲的序列相似性度量方法。对时间序列进行多层次分段,并从分段中均匀抽取相对应的层次分段子序列,然后将层次分段子序列抽象为三维空间的点（反映了分段子序列的均值、长度和趋势）进行相似性度量,最后综合各个层次的相似性度量作为结果。实验表明,在参数设置合理的情况下,此方法能获得较高的序列相似性度量准确度和效率。     

基于近似 Ｗｏｏｄｂｕｒｙ法的杆系结构静力稳定性分析

为了高效求解杆系结构的静力稳定性问题,本文基于多点位移控制算法和近似 Ｗｏｏｄｂｕｒｙ法, 提出了一种静力推覆分析方法。该方法以 Ｗｏｏｄｂｕｒｙ公式为理论基础,对多点位移控制的平衡方程进行 展开,并结合隔离非线性理论形成了具有刚度矩阵弹塑性分离形式的控制方程,采用近似 Ｗｏｏｄｂｕｒｙ法 对控制方程进行高效求解,避免在稳定性分析中整体刚度矩阵的实时求逆运算。通过数值模拟验证了 本文方法的有效性和精确性,结果表明:该方法能够较好地追踪失稳后的非线性平衡路径,获得下降段 曲线,处理负刚度问题。最后,将本文方法应用于某框架结构的静力稳定性分析中,论证了该方法能高 效地获得荷载 －位移全过程曲线,完整反映结构的承载力、稳定性及刚度的整个变化历程。     

新建电泳涂装线投产前的准备工作

介绍了新建阴极电泳涂装线在投产前必须要做的一些准备工作。