Stability of Flip-Chip Interconnects Assembled with Al/Ni(V)/Cu-UBM and Eutectic Pb-Sn Solder During Exposure to High-Temperature Storage

The thermal stability of flip-chip solder joints made with trilayer Al/Ni(V)/Cu underbump metalization (UBM) and eutectic Pb-Sn solder connected to substrates with either electroless Ni(P)-immersion gold (ENIG) or Pb-Sn solder on Cu pad (Cu-SOP) surface finish was determined. The ENIG devices degraded more than 50 times faster than the Cu-SOP devices. Microstructural characterization of these joints using scanning and transmission electron microscopy and ion beam microscopy showed that electrical degradation of the ENIG devices was a direct result of the conversion of the as-deposited Ni(V) barrier UBM layer into a porous fine-grained V₃Sn-intermetallic compound (IMC). This conversion was driven by the Au layer in the ENIG surface finish. No such conversion was observed for the devices assembled on Cu-SOP surface finish substrates. A resistance degradation model is proposed. The model captures changes from a combination of phenomena including increased (1) intrinsic resistivity, (2) porosity, and (3) electron scattering at grain boundaries and surfaces. Finally, the results from this study were compared with results found in a number of published electromigration studies. This comparison indicates that degradation during current stressing in the Pb-Sn bump/ENIG system is in part due to current-crowding-induced Joule heating and the thermal gradients that result from localized Joule heating.     

Subspace analysis of spatial time-frequency distribution matrices

Spatial time-frequency distributions (STFDs) have been previously introduced as the natural means to deal with source signals that are localizable in the time-frequency domain. Previous work in the area has not provided the eigenanalysis of STFD matrices, which is key to understanding their role in solving direction finding and blind source separation problems in multisensor array receivers. The aim of this paper is to examine the eigenstructure of the STFD matrices. We develop the analysis and statistical properties of the subspace estimates based on STFDs for frequency modulated (FM) sources. It is shown that improved estimates are achieved by constructing the subspaces from the time-frequency signatures of the signal arrivals rather than from the data covariance matrices, which are commonly used in conventional subspace estimation methods. This improvement is evident in a low signal-to-noise ratio (SNR) environment and in the cases of closely spaced sources. The paper considers the MUSIC technique to demonstrate the advantages of STFDs and uses it as grounds for comparison between time-frequency and conventional subspace estimates     

Anti‐Oxygen Leaking LiCoO2

LiCoO₂ is a prime example of widely used cathodes that suffer from the structural/thermal instability issues that lead to the release of their lattice oxygen under nonequilibrium conditions and safety concerns in Li‐ion batteries. Here, it is shown that an atomically thin layer of reduced graphene oxide can suppress oxygen release from Li_xCoO₂ particles and improve their structural stability. Electrochemical cycling, differential electrochemical mass spectroscopy, differential scanning calorimetry, and in situ heating transmission electron microscopy are performed to characterize the effectiveness of the graphene‐coating on the abusive tolerance of Li_xCoO₂. Electrochemical cycling mass spectroscopy results suggest that oxygen release is hindered at high cutoff voltage cycling when the cathode is coated with reduced graphene oxide. Thermal analysis, in situ heating transmission electron microscopy, and electron energy loss spectroscopy results show that the reduction of Co species from the graphene‐coated samples is delayed when compared with bare cathodes. Finally, density functional theory and ab initio molecular dynamics calculations show that the rGO layers could suppress O₂ formation more effectively due to the strong C? O_cathode bond formation at the interface of rGO/LCO where low coordination oxygens exist. This investigation uncovers a reliable approach for hindering the oxygen release reaction and improving the thermal stability of battery cathodes.     

Hypocholesterolaemic effect of yoghurt containing Bifidobacterium pseudocatenulatum G4 or Bifidobacterium longum BB536

The effect of a yoghurt supplement containing Bifidobacterium pseudocatenulatum G4 or Bifidobacterium longum BB536 on plasma lipids, lipid peroxidation and the faecal excretion of bile acids was examined in rats fed a cholesterol-enriched diet. After 8 weeks, the rats in the positive control (PC) group who were fed the cholesterol-enriched diet showed significant increases in plasma total cholesterol (TC), low-density lipoprotein (LDL) cholesterol, and malondialdehyde (MDA). However, groups fed a cholesterol-enriched diet supplemented with yoghurt containing B. pseudocatenulatum G4 or B. longum BB536 had significantly lower plasma TC, LDL-C, very-low-density lipoprotein (VLDL) cholesterol, and MDA than had the PC group after 8 weeks of treatment. In addition, faecal excretion of bile acids was markedly increased in the rats fed the yoghurt containing B. pseudocatenulatum G4 or B. longum BB536 as compared to the PC and NC groups.     

Minimum-gain minimum-time deadbeat controllers

This paper considers the design of minimum-gain minimum-time deadbeat controllers (MGMTDC) for linear discrete-time systems. A new direct method for constructing the MGMTDC of minimum Frobenius norm is developed. Compared with many existing techniques, the proposed method gives analytic expressions for the constructed MGMTDC, requires less computational effort, and does not require that the transition matrix be nonsingular.     

A Novel Sprague-Dawley Rat Model Presents Improved NASH/NAFLD Symptoms with PEG Coated Vitexin Liposomes

Chronic liver disease (CLD) is a global threat to the human population, with manifestations resulting from alcohol-related liver disease (ALD) and non-alcohol fatty liver disease (NAFLD). NAFLD, if not treated, may progress to non-alcoholic steatohepatitis (NASH). Furthermore, inflammation leads to liver fibrosis, cirrhosis, and hepatocellular carcinoma. Vitexin, a natural flavonoid, has been recently reported for inhibiting NAFLD. It is a lipogenesis inhibitor and activates lipolysis and fatty acid oxidation. In addition, owing to its antioxidant properties, it appeared as a hepatoprotective candidate. However, it exhibits low bioavailability and low efficacy due to its hydrophobic nature. A novel rat model for liver cirrhosis was developed by CCL4/Urethane co-administration. Vitexin encapsulated liposomes were synthesized by the ‘thin-film hydration’ method. Polyethylene glycol (PEG) was coated on liposomes to enhance stability and stealth effect. The diseased rats were then treated with vitexin and PEGylated vitexin liposomes, administered intravenously and orally. Results ascertained the liposomal encapsulation of vitexin and subsequent PEG coating to be a substantial strategy for treating liver cirrhosis through oral drug delivery.     

Numerical modeling of CdS/CdTe and CdS/CdTe/ZnTe solar cells as a function of CdTe thickness

CdTe-based solar cells have long been of interest for terrestrial usage because of their high potential conversion efficiency (in the range of 18–24%) with low-cost manufacturability and concern over environmental effects. In order to conserve material and address environmental pollution concerns as well as to reduce carrier recombination loss throughout the absorber layer, efforts have been carried out to decrease the thickness of the CdTe absorption layer to 1 μm. As a result, to date, the experimental part of this study has realized cell efficiencies of 15.3% and 11.5% with 7 and 1.2-μm-thick CdTe layers, grown by close-spaced sublimation (CSS) [N. Amin, T. Isaka, T. Okamoto, A. Yamada, M. Konagai, Jpn. J. Appl. Phys. 38 (8) (1999) 4666; N. Amin, T. Isaka, A. Yamada, M. Konagai, Sol. Energy Matter. Sol. Cells 67 (2001) 195]. Since some problems remain with such thin 1 μm CdTe layers, possible methods to realize higher efficiency have been investigated using novel solar cell structures, with the help of numerical analyses tools. In the theory part of this study, numerical analysis with a 1-D simulation program named NSSP (Numerical Solar Cell Simulation Program) has been used to simulate these structures. We investigated the viability of CdTe thickness reduction to 1 μm together with the insertion of higher band-gap materials (i.e., ZnTe) at the back contacts to reduce carrier recombination loss there. The study shows potential results of the thickness reduction of CdTe absorption layer for a conventional CdS/CdTe/Cu-doped C structure with around 16% efficiency for cells below 3  μm CdTe. Decreases were found in spectral response that suggest from minority carrier recombination loss at the back contact interface. A higher band-gap material like ZnTe has been inserted to produce a back surface field (BSF) to inhibit the minority carrier loss at the back contact. An increase in the efficiency to about 20% has been found for a 1 μm-thin CdTe cell, which can be attributed to the increased BSF effect at the back contact of thinner CdTe-based cells.