Correlation of the loss in photovoltaic module performance with the ageing behaviour of the backsheets used

The influence of the type of backsheet on the electrical performance of test modules was evaluated before and after increasing time of accelerated ageing (damp heat [DH] exposure). Besides the measurement of the electrical power of the modules and the performance of the cells by electroluminescence, the ageing‐induced changes within the polymeric encapsulate and backsheets were investigated by means of vibrational spectroscopy and by thermo analytical methods. In addition, the permeability of the backsheets in the original and aged state was determined. This wide set of test parameters and methods allowed for the detection of correlations between (i) physical and chemical properties as well as their ageing‐induced changes of the materials and (ii) the module performance. A clear dependence of the relative loss in power output upon exposure under DH conditions for 2000 h could be observed for a set of identical test modules varied in composition only in the type of back cover used. While the modules containing gas‐tight backsheets and glass experienced only little loss in the relative power output, some modules with permeable backsheets showed a significant relative decrease in the power output and fill factor in dependence of the backsheet type used. Cell degradation could be visualised by recording electroluminescence images before and after the accelerated ageing test. The permeation properties of the backsheet used and their ageing‐induced changes seem to have an influence on the module performance. However, the absolute values neither of the water vapour transmission rate (WVTR) nor of the oxygen transmission rate (OTR) are directly linked to the loss in power output upon accelerated ageing under DH conditions. It could be shown that the ageing‐induced changes (relative transmission rates) between WVTR and OTR can be correlated with the module performance. These ageing‐induced changes in the permeation behaviour of the backsheets can be explained by (i) physical changes (e.g. post‐crystallisation, changes in the crystal structure or the crystalline microstructure) and (ii) chemical ageing effects such as a decrease in the molecular mass of the polyester (PET) polymer chains because of hydrolytic polymer degradation leading to a change in the crystallisation behaviour of PET. Hydrolytic degradation (= chemical ageing) of the PET core layer was observed (with varying extent) for all PET‐based backsheets and can, thus, not be directly correlated with the loss in performance of the corresponding test modules. The physical ageing effects, however, were detected only for those backsheets showing (i) strong deviating changes in the relative permeation rates for oxygen and water vapour upon accelerated ageing and (ii) a clear loss in electrical performance. Copyright © 2015 John Wiley & Sons, Ltd.     

The Effect of Age and Intrinsic Aerobic Exercise Capacity on the Expression of Inflammation and Remodeling Markers in Rat Achilles Tendons

Old age, adiposity, and metabolic disorders are known as risk factors for chronic tendinopathy, which is a common problem in both athletes and the general population. However, the importance of these influencing factors has not yet been well understood. This study investigated alterations in gene expression and histology of Achilles tendons of young (10 weeks) and old (100 weeks) rats bred for low (low capacity runners, LCR) and high (high capacity runners, HCR) intrinsic aerobic exercise capacity. In this rat model, LCR displayed a phenotype of reduced exercise capacity, higher body weight, and metabolic dysfunctions compared to HCR. We hypothesized that the risk factors for tendinopathy in old LCR could lead to more pronounced impairments in Achilles tendon tissue. In quantitative real-time PCR (qPCR), age-related downregulation of tenocyte markers e.g., tenomodulin, genes related to matrix modeling and remodeling (e.g., collagens, elastin, biglycan, fibronectin, tenascin C) as well as transforming growth factor beta 3 (Tgfb3) have been detected. Inflammation marker cyclooxygenase 2 (Cox2) was downregulated in old rats, while microsomal prostaglandin E synthase 2 (Ptges2) was upregulated in old HCR and old LCR. In all groups, interleukin 6 (Il6), interleukin 1 beta (Il1b), and tumor necrosis factor alpha (Tnfa) showed no significant alteration. In histological evaluation, tendons of old rats had fewer and more elongated tenocyte nuclei than young rats. Even though a higher content of glycosaminoglycans, a sign of degeneration, was found in old HCR and LCR, no further signs of tendinopathy were detectable in tendons of old rats by histological evaluation. Low intrinsic aerobic exercise capacity and the associated phenotype did not show significant effects on gene expression and tendon histology. These findings indicate that aging seems to play a prominent role in molecular and structural alterations of Achilles tendon tissue and suggests that other risk factors associated with intrinsic aerobic exercise capacity are less influential in this rat model.     

Starch-Derived Products for Detergents

Recent developments in the formulation of detergents have been driven by a strong consumer demand for natural and biodegradable products. Detergent manufacturers responded to this demand with corresponding products and advertising slogans such as “fully biodegradable”, “natural” or even “double natural” to oust their competitors. In a detergent formulation, starch- derived products can in principle be used for the following purposes: as the hydrophilic head group in surfactants, as the starting material for (poly)carboxylate co-builders and as the backbone of bleaching activators. Non-ionic classical surfactants can be replaced by alkylpolyglucosides (APGs), a class of products completely based on renewable resources such as glucose and fatty alcohols derived from natural fatty acids. Sodium tripolyphosphate (STPP), the product responsible for the eutrophication of surface waters, can be substituted by a combination of an inorganic zeolite and highly oxidised starch (dicarboxylic starch) or by citrate. Acetylated polyols derived from hydrogenated carbohydrates such as sorbitol can take over the function of the petrochemically-based tetraacetyl ethylene diamine (TAED) used as activator to allow perborate bleaching at lower washing temperatures.     

C/C-SiC component for metallic phase change materials

Thanks to their high energy density and thermal conductivity, metallic Phase Change Materials (mPCM) have shown great potential to improve the performance of thermal energy storage systems. However, the commercial application of mPCM is still limited due to their corrosion behavior with conventional container materials. This work first addresses on a fundamental level, whether carbon-based composite-ceramics are suitable for corrosion critical components in a thermal storage system. The compatibility between the mPCM AlSi₁₂ and the Liquid Silicon Infiltration (LSI)-based carbon fiber reinforced silicon carbide (C/C-SiC) composite is then investigated via contact angle measurements, microstructure analysis, and mechanical testing after exposure. The results reveal that the C/C-SiC composite maintains its mechanical properties and microstructure after exposure in the strongly corrosive mPCM. Based on these results, efforts were made to design and manufacture a container out of C/C-SiC for the housing of mPCM in vehicle application. The stability of the component filled with mPCM was proven nondestructively via computer tomography (CT). Successful thermal input- and output as well as thermal storage ability were demonstrated using a system calorimeter under conditions similar to the application. The investigated C/C-SiC composite has significant application potential as a structural material for thermal energy storage systems with mPCM.     

Identification of chemical markers for the sensory shelf-life of saveloy

The aroma composition, the microbial composition and the sensory profile were measured in sliced saveloy samples packed in modified atmosphere (MA). The main objective was to identify aroma compounds with potential as chemical markers to identify the sensory changes of saveloy. The 60 aroma compounds isolated from the saveloy samples by dynamic headspace extraction and measured by Gas Chromatography Mass Spectrometry (GC-MS) were used to model the sensory attributes sour&old odour and meaty odour using partial least squares regression (PLS). 2- and 3-methylbutanal, 2- and 3-methylbutanol, acetoin and diacetyl were found to have the highest impact on both sour&old odour and meaty odour of the samples. The results show that these four aroma compounds have high potential as chemical markers for the sensory shelf-life of sliced and MA-packed saveloy.     

Diagenetic transformation of dissolved organic nitrogen compounds under contrasting sedimentary redox conditions in the Black Sea

Remineralization of organic matter in reactive marine sediments releases nutrients and dissolved organic matter (DOM) into the ocean. Here we focused on the molecular-level characterization of DOM by high-resolution Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR-MS) in sediment pore waters and bottom waters from contrasting redox regimes in the northern Black Sea with particular emphasis on nitrogen-bearing compounds to derive an improved understanding of the molecular transformations involved in nitrogen release. The number of nitrogen-bearing molecules is generally higher in pore waters than in bottom waters. This suggests intensified degradation of nitrogen-bearing precursor molecules such as proteins in anoxic sediments: No significant difference was observed between sediments deposited under oxic vs anoxic conditions (average O/C ratios of 0.55) suggesting that the different organic matter quality induced by contrasting redox conditions does not impact protein diagenesis in the subseafloor. Compounds in the pore waters were on average larger, less oxygenated, and had a higher number of unsaturations. Applying a mathematical model, we could show that the assemblages of nitrogen-bearing molecular formulas are potential products of proteinaceous material that was transformed by the following reactions: (a) hydrolysis and deamination, both reducing the molecular size and nitrogen content of the products and intermediates; (b) oxidation and hydration of the intermediates; and (c) methylation and dehydration.     

MgAl2O4-Spinel Synthesized by High-Energy Ball Milling and Reaction Sintering

A new way to prepare magnesia-alumina-spinel was investigated making use of a mixed powder system of MgO and metallic Al-3 wt% Mg. Intensive ball milling was applied which provides the formation of new powder particles as composite of both components in intimate contact. The new configuration of the particles had a significant impact on the reaction sintering behavior leading to single phase spinel microstructures at moderate temperatures below 1400°C. Optimized milling of the powder mixture was therefore required providing reduced crystallite sizes and strongly enlarged interfacial area shared by the reacting components. The optimal milling time was identified by the complete reaction of the starting powders to spinel during sintering. Shorter milling times led to incomplete reactions and longer milling times contaminated the milling product by debris from the milling tools. The amount of interfaces generated by the intimate mixing dominated the sintering reaction kinetics whereas the specific surfaces area was of secondary importance.     

Adaptation of the ToxRTool to Assess the Reliability of Toxicology Studies Conducted with Genetically Modified Crops and Implications for Future Safety Testing

To determine the reliability of food safety studies carried out in rodents with genetically modified (GM) crops, a Food Safety Study Reliability Tool (FSSRTool) was adapted from the European Centre for the Validation of Alternative Methods’ (ECVAM) ToxRTool. Reliability was defined as the inherent quality of the study with regard to use of standardized testing methodology, full documentation of experimental procedures and results, and the plausibility of the findings. Codex guidelines for GM crop safety evaluations indicate toxicology studies are not needed when comparability of the GM crop to its conventional counterpart has been demonstrated. This guidance notwithstanding, animal feeding studies have routinely been conducted with GM crops, but their conclusions on safety are not always consistent. To accurately evaluate potential risks from GM crops, risk assessors need clearly interpretable results from reliable studies. The development of the FSSRTool, which provides the user with a means of assessing the reliability of a toxicology study to inform risk assessment, is discussed. Its application to the body of literature on GM crop food safety studies demonstrates that reliable studies report no toxicologically relevant differences between rodents fed GM crops or their non-GM comparators.     

Heat/mass transfer from a neutrally buoyant sphere by mixed natural and forced convection in a simple shear flow

Building on the work of Yang et al. in 2011, the finite difference method and the Boussinesq approximation were applied to solve the time‐dependent Navier‐Stokes, convection diffusion and continuity equations in spherical coordinates. An idealized condition, the mass transfer from a neutrally buoyant sphere in a horizontal simple shear flow with natural convection was numerically simulated for the first time in this work. In the hybrid transfer case, the outwardly spiraling streamlines enhanced the transfer process, but the counter‐gravity spiraling streamlines near the sphere hindered the natural convection and the spatial dilution action weakened the natural convection transfer process. These competing effects led to nonmonotonic behavior of the Nusselt number with Reynolds number. Results from these previously undocumented cases were summarized into correlations for predicting Nusselt numbers at finite Reynolds numbers for various Grashof and Prandtl numbers. © 2018 American Institute of Chemical Engineers AIChE J, 64: 2816–2827, 2018     

Determining profits for solar energy with remote sensing data

The objects of the article are to determine the profits for solar energy integrating remote sensing data: the optimal locations of photovoltaic and the base price of electricity resulting from solar energy. An illustrated experiment with five European countries data sets is taken. Results indicate that Germany is the only optimal region to set up photovoltaic so as to satisfy the electricity demand of the five considered. Results also show that solar energy is a promising energy source since the highest base price of electricity resulting from solar energy is only 0.35 $/kWh. The base electricity price for Germany is the lowest whereas the base electricity price for Italy is the highest. Moreover, the results further indicate that the photovoltaic module price plays a key role in determining the best appropriate region(s) to install photovoltaic and the base electricity price.