Synthesis and magnetic study of Co-Al substituted calcium hexaferrite

A series of calcium substituted polycrystalline ferrite ceramics with magnetoplumbite structures were synthesized using perfect stoichiometric mixtures of oxides with chemical composition, CaAl_xCo_xFe_12−2xO₁₉ (x = 2−5), by standard ceramic technique. The variation in the values ofH _candM _s,which depends on the additive content and the temperature, was studied by means of a vibration magnetometer. The strong variation observed in coercivity, saturation magnetization and Curie temperature with chemical composition give rise to the possibility of controlling these properties and hence applying these compounds in the millimeter— microwave range.     

Trust management for e-transactions

There has been enormous increase in transactions and cooperative-computing services on the internet. This is both a technical and a social phenomenon. Transactions and services over the internet have global reach and users, known or unknown to the service provider, might be interested in availing access or participating in the cooperative transaction in a distributed manner. Thus, it is very important for service providers to identify and establish trustworthiness of potential collaborators, which they do by writing contracts (e.g. access control, security policies; the words contract and policy are used interchangeably) without violating the privacy and confidentiality laws that prevail across geographical boundaries. But as the system becomes complex and dynamic, contractual incompleteness arises since it becomes cumbersome to mention potentially large set of outcomes of the user's choice of action. Trust plays a crucial role in the design of optimal contracts; not all the relevant, valuable information on the user's choice of action is incorporated in the equilibrium contract. It may also be noted in that traditional transactions, the notion ofseeing is believing plays a vital role. However, in e-transactions, this is not the case. The challenge is to see how in such a scenario trust can indeed be generated. Note that the presence of trust facilitates cooperative behaviour and allows for exchange to occur in situations where its absence would preclude trade. In this paper, we shall present a comparative analysis of various approaches of trust management in practice that integrates technology with other factors. We shall also bring out the relative deficiencies and how these issues are tackled in our ongoing work that facilitates execution of optimal contracts.     

Positive chronotropic actions of parathyroid hormone and parathyroid hormone-related peptide are associated with increases in the current, I(f), and the slope of the pacemaker potential

BACKGROUND: The classic calciotropic hormone parathyroid hormone (PTH) and its paracrine factor parathyroid hormone-related protein (PTHrP) both increase heart rate. METHODS AND RESULTS: We used standard electrophysiological techniques to study the effects of PTH and PTHrP on isolated rabbit sinus node, isolated canine Purkinje fibers, and disaggregated rabbit sinus node myocytes. Sinus node maximum diastolic potential, activation voltage, and amplitude were unchanged by PTH or PTHrP (P>.05). However, the slope of phase 4 and the automatic rate were increased at PTH and PTHrP > or = 10 nmol/L (P<.05). Comparable results were seen in canine Purkinje fibers. We then used the perforated-patch technique to study the I(f) pacemaker current in sinus node. PTH 12.5 nmol/L and PTHrP 12.5 to 18 nmol/L increased I(f) at -65 mV by 68+/-41% (n=5) and 69+/-50% (n=5), respectively. Actions of both agents were reversible. The increase in I(f) appeared to result from a change in maximal conductance and not a shift in the voltage dependence of activation. CONCLUSIONS: These observations provide, for the first time, direct electrophysiological support for the chronotropic actions of PTH and PTHrP. They suggest that classic hormones and paracrine factors can have multiple functions and that in the case of PTH and PTHrP, a newly recognized action is to alter automaticity directly.     

A Novel Mouse Model of TGFβ2-Induced Ocular Hypertension Using Lentiviral Gene Delivery

Glaucoma is a multifactorial disease leading to irreversible blindness. Primary open-angle glaucoma (POAG) is the most common form and is associated with the elevation of intraocular pressure (IOP). Reduced aqueous humor (AH) outflow due to trabecular meshwork (TM) dysfunction is responsible for IOP elevation in POAG. Extracellular matrix (ECM) accumulation, actin cytoskeletal reorganization, and stiffening of the TM are associated with increased outflow resistance. Transforming growth factor (TGF) β2, a profibrotic cytokine, is known to play an important role in the development of ocular hypertension (OHT) in POAG. An appropriate mouse model is critical in understanding the underlying molecular mechanism of TGFβ2-induced OHT. To achieve this, TM can be targeted with recombinant viral vectors to express a gene of interest. Lentiviruses (LV) are known for their tropism towards TM with stable transgene expression and low immunogenicity. We, therefore, developed a novel mouse model of IOP elevation using LV gene transfer of active human TGFβ2 in the TM. We developed an LV vector-encoding active hTGFβ2^C226,228S under the control of a cytomegalovirus (CMV) promoter. Adult C57BL/6J mice were injected intravitreally with LV expressing null or hTGFβ2^C226,228S. We observed a significant increase in IOP 3 weeks post-injection compared to control eyes with an average delta change of 3.3 mmHg. IOP stayed elevated up to 7 weeks post-injection, which correlated with a significant drop in the AH outflow facility (40.36%). Increased expression of active TGFβ2 was observed in both AH and anterior segment samples of injected mice. The morphological assessment of the mouse TM region via hematoxylin and eosin (H&E) staining and direct ophthalmoscopy examination revealed no visible signs of inflammation or other ocular abnormalities in the injected eyes. Furthermore, transduction of primary human TM cells with LV_hTGFβ2^C226,228S exhibited alterations in actin cytoskeleton structures, including the formation of F-actin stress fibers and crossed-linked actin networks (CLANs), which are signature arrangements of actin cytoskeleton observed in the stiffer fibrotic-like TM. Our study demonstrated a mouse model of sustained IOP elevation via lentiviral gene delivery of active hTGFβ2^C226,228S that induces TM dysfunction and outflow resistance.     

Kinetics of colour and texture changes in Gulabjamun balls during deep-fat frying

Gulabjamun, a popular Indian milk sweet, is prepared by deep-fat frying of balls of dough made of khoa, wheat flour and baking powder, and subsequent dipping in sugar syrup. Kinetics of colour and texture changes in gulabjamun balls were investigated with regard to frying temperature (120, 130, 140 °C). Crust colour was evaluated in terms of CIELAB parameters L*, a*, b*, and ΔE, and rheological properties in terms of hardness, stiffness and firmness. Frying-induced surface browning was reflected in a decreasing lightness value L* as well as the ratio of yellow hue index b* and red hue index a* and total colour expressed in terms of ΔE, L* following a zero-order change whereas the other parameters, a first-order change. Increase in the texture parameters hardness and firmness followed zero-order reaction kinetics whereas stiffness rise followed a first-order reaction. The temperature dependence of reaction constants could be explained by the Arrhenius equation. Activation energy was also obtained for both the colour and texture changes, which were in the range of 24.5-77.6 kJ/mol. High correlations between colour and texture parameters were observed and it was concluded that L* alone could be used to predict the firmness of deep-fat fried gulabjamun balls.     

Quantal transmitter release at somatic motor-nerve terminals: stochastic analysis of the subunit hypothesis

Here we analyze the problem of determining whether experimentally measured spontaneous miniature end-plate currents (MEPCs) indicate that quanta are composed of subunits. The properties of MEPCs at end plates with or without secondary clefts at the neuromuscular junction are investigated, using both stochastic and deterministic models of the action of a quantum of transmitter. It is shown that as the amount of transmitter in a quantum is increased above about 4000 acetylcholine (ACh) molecules there is a linear increase in the size of the MEPC. It is possible to then use amplitude-frequency histograms of such MEPCs to detect a subunit structure, as there is little potentiation effect above 4000 ACh molecules. Autocorrelation and power spectral analyses of such histograms establish that their subunit structure can be detected if the coefficient of variation of the subunit size is less than about 0.12 or, if electrical noise is added, about 0.1. Positive gradients relate the rise time and half-decay times of MEPCs to their amplitude, even in the absence of potentiating effects; these gradients are shallower at motor nerve terminals that possess secondary clefts. The effect of asynchronous release of subunits is also investigated. The criteria determined by this analysis for identifying a subunit composition in the quantum are applied to an amplitude-frequency histogram of MEPCs recorded from a small group of active zones at a visualized amphibian motor-nerve terminal. This did not provide evidence for a subunit structure.     

Polyaniline–CdS nanocomposites: effect of camphor sulfonic acid doping on structural, microstructural, optical and electrical properties

Nanocomposites of CdS nanocrystals with conducting polyaniline doped with camphor sulfonic acid (CSA) have been prepared by spin coating technique and investigated by X-ray diffraction, field emission scanning electron microscopy (FESEM), fourier transform infra red spectroscopy (FTIR), UV–visible spectroscopy and electrical transport method. The X-ray diffraction patterns showed broad peaks due to formation of nanoparticles of CdS in polyaniline matrix. FESEM showed that the transformation of morphology from agglomeration to nanopetals. The FTIR spectra confirmed the interaction between CSA and polyaniline (PANi)–CdS nanocomposite. The UV–visible spectrums revealed the enhancement of doping level for the PANi–CdS nanocomposites which is assigned to the existence of greater number of charges on the polymer backbone. DC electrical conductivity studies showed an increase in conductivity of PANi–CdS nanocomposites from 6.9?×?10^?6 to 3.14?×?10^?4 due to addition of CSA (10–50?%).     

Development of an Automated Method for Folin‐Ciocalteu Total Phenolic Assay in Artichoke Extracts

Abstract: We developed a system to run the Folin‐Ciocalteu (F‐C) total phenolic assay, in artichoke extract samples, which is fully automatic, consistent, and fast. The system uses 2 high performance liquid chromatography (HPLC) pumps, an autosampler, a column heater, a UV/Vis detector, and a data collection system. To test the system, a pump delivered 10‐fold diluted F‐C reagent solution at a rate of 0.7 mL/min, and 0.4 g/mL sodium carbonate at a rate of 2.1 mL/min. The autosampler injected 10 μL per 1.2 min, which was mixed with the F‐C reagent and heated to 65 °C while it passed through the column heater. The heated reactant was mixed with sodium carbonate and color intensity was measured by the detector at 600 nm. The data collection system recorded the color intensity, and peak area of each sample was calculated as the concentration of the total phenolic content, expressed in μg/mL as either chlorogenic acid or gallic acid. This new method had superb repeatability (0.7% CV) and a high correlation with both the manual method (r²= 0.93) and the HPLC method (r²= 0.78). Ascorbic acid and quercetin showed variable antioxidant activity, but sugars did not. This method can be efficiently applied to research that needs to test many numbers of antioxidant capacity samples with speed and accuracy.     

Modeling of friction-stir butt-welds and its application in automotive bumper impact performance Part 2. Impact modeling and bumper crash performance

Ever increasing requirements regarding vehicle safety have led to rapid developments in various joining process. Among FSW widely used for Aluminum alloy welded structure of car body because of their remarkable performance in welding. For a better understanding of this performance, it is necessary to determine the behavior of butt weld in service conditions. In earlier phase of this study, thermo mechanical simulations and analysis are performed to understand the thermal behavior in the FSW weld zones. The developed models are correlated against published experimental results in terms of temperature profile of the weld zone. The objectives of the second part of this work is to develop and demonstrate an FE model of bumper and crash box assembly that would improve on the current modeling techniques for the mechanical response of welds in structural problems.     

Photoactive Earth‐Abundant Iron Pyrite Catalysts for Electrocatalytic Nitrogen Reduction Reaction

The generation of ammonia, hydrogen production, and nitrogen purification are considered as energy intensive processes accompanied with large amounts of CO₂ emission. An electrochemical method assisted by photoenergy is widely utilized for the chemical energy conversion. In this work, earth‐abundant iron pyrite (FeS₂) nanocrystals grown on carbon fiber paper (FeS₂/CFP) are found to be an electrochemical and photoactive catalyst for nitrogen reduction reaction under ambient temperature and pressure. The electrochemical results reveal that FeS₂/CFP achieves a high Faradaic efficiency (FE) of ≈14.14% and NH₃ yield rate of ≈0.096 µg min^?1 at ?0.6 V versus RHE electrode in 0.25 m LiClO₄. During the electrochemical catalytic reaction, the crystal structure of FeS₂/CFP remains in the cubic pyrite phase, as analyzed by in situ X‐ray diffraction measurements. With near‐infrared laser irradiation (808 nm), the NH₃ yield rate of the FeS₂/CFP catalyst can be slightly improved to 0.1 µg min^?1 with high FE of 14.57%. Furthermore, density functional theory calculations demonstrate that the N₂ molecule has strong chemical adsorption energy on the iron atom of FeS₂. Overall, iron pyrite‐based materials have proven to be a potential electrocatalyst with photoactive behavior for ammonia production in practical applications.