Effect of catalyst type on the kinetics of the photoelectrochemical disinfection of water inoculated with E. coli

The rates of the photoelectrochemical disinfection of Escherichia coli at TiO₂ electrodes were measured as a function of concentration and applied potential. Two different TiO₂ photoelectrodes were used: a thermally treated titanium plate and a porous film prepared by a sol–gel hydrolysis technique. The kinetics of the disinfection process were found to depend upon the nature of the electrode material. For the thermal film they were first order, and half order for the sol–gel film. It was also found that the catalytic activity per unit surface area of catalyst is many orders of magnitude greater than that observed using TiO₂ slurries; this was attributed to the reduced rate of electron-hole recombination afforded by the application of a small potential bias (1 V vs Ag/AgCl), and hence the exploitation of the electric field enhancement (EFE) effect.     

Structural changes of flavylium salts

A general discussion is presented of the effects of hydroxylation pattern upon the structural changes of flavylium salts and their stability at different pH levels. The discussion is based upon the results of spectrometric and polarographic investigations of flavylium salts and incorporates hitherto unpublished data for the anthocyanidin, cyanidin chloride.     

Fine grinding of thermoplastics by high speed friction grinding assisted by guar gum

High speed friction grinding has been used to grind plant and food substances in water but never been explored for grinding of thermoplastics like polylactic acid (PLA), low and high density polyethylene and polypropylene. Such grinding was investigated in this work and was made possible by using 0.5% guar gum solution instead of just water because increasing the viscosity of water reduced their settling and the speed of passing through the grinder. Tensile, flexural, and impact strengths of the plastics were studied and higher grinding efficiency of PLA could be explained by its low elongation-at-break compared to low density polyethylene, high density polyethylene, and polypropylene. The microplastics (2000–45 μm) were studied for mass and particle size distributions and by scanning electron microscopy, ¹³C CP/MAS NMR, Fourier transform infrared spectroscopy, differential scanning calorimetry, and thermogravimetric analysis. In addition, viscosity of guar gum and contact angles was measured. This new technology can produce finely ground microplastics (710–45 μm) for a variety of applications.     

Codeposited chromium and silicon diffusion coatings for Fe-Base alloys via pack cementation

The simultaneous deposition of Cr and Si into plain carbon, low-alloy, and austenitic steels using a halide-activated pack-cementation process is described. Equilibrium partial pressures of gaseous species have been calculated using the STEPSOL computer program to aid in designing specific processes for codepositing the desired ratios of Cr and Si into a given alloy. The calculations indicate that NaCl-activated packs are chromizing, while NaF-activated packs deposit more Si with less Cr. The use of a dual activator (e.g., NaF+NaCl) allows for the deposition of both Cr and Si in the desired amounts. Single-phase ferritic coatings (150–250 microns thick) with a surface concentration of 20–35 wt.% Cr and 2–4% Si have been grown on AISI 1018, Fe-2.25 Cr-1.0Mo-0.15C, and Fe-0.5 Cr-0.5 Mo-0.2C steels using packs containing a 90 wt.% Cr-10Si binary source alloy, a NaF+NaCl activator, and a silica filler. Two-phase coatings (approximately 75 microns thick) containing 20–25 wt.% Cr and 2.0–2.4% Si have been obtained on 304 stainless steel using packs containing a 90 wt.% Cr-10Si binary source alloy, a NaF activator, and an alumina filler. The same pack chemistry allowed the diffusion of Cr and Si into the austenitic Incoloy 800 alloy without a phase change. A coated Fe-2.25 Cr-1.0 Mo-0.15 C coupon with a surface concentration of Fe-34 wt.% Cr-3Si was cyclically oxidized in air at 700°C for over four months and 47 cycles. The weight gain was very low (<0.2 mg/cm²) with no scale spalling detected. Coated coupons of AISI 1018 steel, and Fe-0.5 Cr-0.5 Mo-0.2C steel have shown excellent oxidation-sulfidation resistance in reducing, sulfur-containing atmospheres at temperatures from 400 to 700°C and in erosion and erosion-oxidation testing in air at 650 and 850°C.     

Long-term follow-up on hydroxylapatite-coated cylindrical dental implants: a comparison between developmental and recent periods

PURPOSE: To compare success rates for dental implants placed from 1985 through 1988 and from 1989 through 1991, and to investigate the factors associated with success or failure. PATIENTS AND METHODS: All hydroxylapatite-coated cylindrical implants placed from 1985 through 1991 were followed yearly. Lifetable survival analyses compared implant success for a "developmental period" from 1985 through 1988 (4 to 8 years follow-up) and a "recent period" from 1989 through 1991 (1 to 4 years follow-up). Reasons for success or failure, time from implant placement to removal related to failure reason, outcome after implant removal, and a morbidity analysis are included. RESULTS: The 7 to 8-year cumulative success rate for all implants placed in the developmental period (maxilla and mandible combined) was 86.5%; it was 84.2% for all maxillary implants and 87.5% for all mandibular implants. The cumulative success rate for all implants placed in the recent period was 97.5%; it was 97.5% for all maxillary implants and 97.6% for all mandibular implants. The difference between the two periods was statistically significant only for the anterior maxilla. Regression analysis on the interval success rates indicates that interval failure did not follow a linear relationship with time. The most common reasons associated with failure were lack of keratinized gingiva, poor oral hygiene, mechanical overload, and malposition. CONCLUSION: Comparison with previously reported cumulative success rates indicated learning curve experiences comparable with other implant systems. Improvements in hardware, surgical and prosthetic techniques, and patient selection have led to an improvement in success rates with the recent period implants.     

Arginine 206 of the C5a receptor is critical for ligand recognition and receptor activation by C-terminal hexapeptide analogs

C5a is a 74-amino-acid glycoprotein whose receptor is a member of the rhodopsin superfamily. While antagonists have been generated to many of these receptors, similar efforts directed at family members whose natural ligands are proteins have met with little success. The recent development of hexapeptide analogs of C5a has allowed us to begin elucidation of the molecular events that lead to activation by combining a structure/activity study of the ligand with receptor mutagenesis. Removal of the hexapeptide's C-terminal arginine reduces affinity by 100-fold and eliminates the ability of the ligand to activate the receptor. Both the guanidino side chain and the free carboxyl of the arginine participate in the interaction. The guanidino group makes the energy-yielding contact with the receptor, while the free carboxylate negates "electrostatic" interference with Arg-206 of the receptor. It is the apparent movement Arg-206 induced by this set of interactions that is responsible for activation, since conversion of Arg-206 to alanine eliminates the agonist activity of the hexapeptides. Surprisingly, activation is a nearly energy-neutral event and may reflect the binding process rather than the final resting site of the ligand.     

The North Carolina Breast Cancer Screening Program: foundations and design of a model for reaching older, minority, rural women

Breast cancer screening programs do not reach all women at the same rate. Screening mammography use varies according to sociodemographic characteristics; mammography utilization is highest among women in their fifties but then decreases with age. In North Carolina, breast cancer is a particular burden for Black and lower-income women. Black women are more likely to be diagnosed with late stage disease, and their rate of breast cancer mortality is higher than it is for White women even though the incidence in White women is greater. Older, Black, and low-income women are less likely to obtain screening by mammography and clinical breast examination. The Black-White gap is even more pronounced among rural women, in part because they are more likely to be poor. The North Carolina Breast Cancer Screening Program (NC-BCSP) was established to increase the rate of regular mammography screening by an absolute 20% in 3 years among older Black women ages 50 and older in five rural counties in the eastern part of the state. In this paper, we describe the genesis of this comprehensive community intervention model, highlighting the behavioral science constructs, health education principles, and theories of behavioral and organizational change that form its conceptual foundation. NC-BCSP's theoretical foundations include the social ecological perspective, the PRECEDE model of health promotion, the Health Belief Model of individual change, and the "stages of change" transtheoretical model. We also review the experiences and lessons learned from two previous outreach initiatives in North Carolina that provided valuable "lessons" in the development of the NC-BCSP intervention model. In the second half of the paper, we describe the actual NC-BCSP interventions, activities, and evaluation tools, citing specific examples of how the underlying theories are implemented. NC-BCSP's goal goes beyond individual behavior change to raise low mammography screening rates among Black women in rural North Carolina. Its ultimate objective is to create linkages across agencies, and between agencies and communities, that will endure after the research project ends.     

Localization of atrial natriuretic peptide receptors in the rat tongue and hard palate

The effect of a naturally occurring plant phenolic constituent (the acylphloroglucinol derivative, jensenone, derived from Eucalyptus jensenii) on the food intake of two folivorous marsupials, the common ringtail (Pseudocheirus peregrinus) and the common brushtail possum (Trichosurus vulpecula) was studied. When fed diets containing varying concentrations of jensenone, both species regulated their intake of jensenone so as not to exceed a ceiling intake. This ceiling was about twice as high for common ringtails as for common brushtails from northern Australia. Southern populations of common ringtails showed greatly reduced capacities to tolerate jensenone. When common brushtails were injected (0.5 mg.kg-0.75 body mass) with ondansetron (a selective antagonist of serotonin 5HT3 receptors), they ate significantly more jensenone than animals injected with physiological saline. The same pattern was observed when common ringtails were fed diets containing both jensenone and ondansetron (0.0035 mg.g-1 wet mass of diet). Ondansetron injection had no effect on food intake when the food did not contain jensenone while the addition of higher doses of ondansetron to diets of common ringtails very slightly reduced food intakes of a non-jensenone diet. When common brushtails were given 50 mg of jensenone by gastric lavage, their average subsequent intake of dietary jensenone matched the difference between the daily threshold and the dose given, although the response of individuals was highly variable. Lavage with water alone had no effect on subsequent jensenone intake compared with the pre-dose period. We interpret these results as evidence that the antifeedant effects of jensenone and related compounds are partly mediated by serotonin action on 5HT3 receptors most likely via "nausea" to condition a food aversion.